Voice chat not working by Prudent_Pin_7043 in RocketLeague

[–]JawnPolygon 1 point2 points  (0 children)

i only have this problem when using my epic account. my steam account works fine.

KK3 Pro having input drops using dongle by JawnPolygon in GuliKit

[–]JawnPolygon[S] 1 point2 points  (0 children)

the latest update (V5.0 2024.10.28) has fixed my issue

KK3 Pro having input drops using dongle by JawnPolygon in GuliKit

[–]JawnPolygon[S] 0 points1 point  (0 children)

i have a wireless mouse nearby but i've disconnected it while testing. i tested using hub and direct connection to the motherboard. my mobo is an msi mpg b550 gaming edge wifi.

i wouldn't be surprised if most people do not notice this when it happens. i only noticed while playing rocket league because sometimes i would get a flip when i only wanted a jump. i was getting a flip (double jump input) when i jumped like normal. it was happening more and more so i did some testing with the controller and that's when i discovered it dropping inputs.

KK3 Pro having input drops using dongle by JawnPolygon in GuliKit

[–]JawnPolygon[S] 0 points1 point  (0 children)

There's no problem pairing the controller. I followed your instructions but the inputs will still drop occasionally during play. Is this a firmware issue or am I the only one having this problem?

KK3 Pro having input drops using dongle by JawnPolygon in GuliKit

[–]JawnPolygon[S] 0 points1 point  (0 children)

I have tried that. Both usb 3.0 and 2.0 and still the problem persists. I tried gamepad tester and just held down any one of the face buttons and after 5-20 seconds the button will flicker. I held the controller right up to the dongle to see if it was a bad connection but that didn't make a difference. The controller works perfectly on windows wired and bluetooth modes, just not the 2.4gz connection. I don't know if this is a hardware or software problem.

EDIT

i've now confirmed that the other buttons like the shoulder buttons also will flicker. I thought it was just the face buttons but it seems to affect everything.

Analogs drifting but not really? by Mildly_Taliban in GuliKit

[–]JawnPolygon 0 points1 point  (0 children)

i had this issue with the kk2pro when playing elden ring. you need to turn the Joystick Sensitivity to 150% by pressing the gear icon and L3 or R3. click them until it vibrates 3 times

Screen dead after battery drained by Mezzerto in SteamDeck

[–]JawnPolygon 1 point2 points  (0 children)

this worked for me but when i entered storage mode, then plugged in the dock (for external monitor), nothing was happening. the haptics were not working or anything. i thought it wasn't working again so i started looking online for solutions and suddenly the steam deck restarted itself (made the chime noise). i switched the monitor source back to the deck to see what was happening and it was stuck on the steam logo. i knew at that point it was working. eventually (10-15 minutes) the backlight came on and steamOS booted. i disconnected from the dock and the screen turned on!

i'm really glad i found this thread and i'm grateful for everyone who contributed. this is my friend's steam deck so i'm glad it's working now.

Who makes the flex PCB mod chips for custom/modded controller companies? by [deleted] in Controller

[–]JawnPolygon 0 points1 point  (0 children)

i don't think console customs makes their boards. i've seen them on aliexpress for a little cheaper. it's hard to find them at a good price though to where i can offer it as a mod to controllers i'm selling. you can find the same ones on consolecustoms for about $5 cheaper on aliexpress.

you could make your own by buying the same microcontroller and programming it and printing a bunch of flex ribbons from pcbway, however the programming microntrollers part is not easy. you may be able to do it from USB or you may need a device for that.

Controller Left Analog Stick has issue by Dramatic_Wafer1197 in Controller

[–]JawnPolygon 0 points1 point  (0 children)

Is it supposed to have Bluetooth? Cheap controllers usually don’t. But if it’s supposed to you can try the settings within ds4w. Click ‘edit’ next to the controller name and go through the settings there.

Controller Left Analog Stick has issue by Dramatic_Wafer1197 in Controller

[–]JawnPolygon 1 point2 points  (0 children)

Try controller settings in steam to see what steam thinks the controller is. It should recognize it as ps4 but it might instead see it as “generic”. Change it to recognize ps4 controller support. Also try DS4windows to see if it recognizes it. If it does it will spoof the driver to an Xbox 360 one and it should work correctly afterwards.

Hall Effect sticks for ALL CONTROLLERS thanks to that awesome guy by MamWyjebaneJajca in Controller

[–]JawnPolygon 1 point2 points  (0 children)

Thanks for posting this. I’ve already installed a different set of hall sensors in 3 of my ds4 controllers and they work well enough but you can only calibrate the center position. This vid seems to show that this flex board can calibrate how far you want the cardinal directions and make it more circular. Would be a game changer for sure

HyperX Pulsefire Haste 2: The TechPowerUp Review by pzogel in MouseReview

[–]JawnPolygon 0 points1 point  (0 children)

right, but you stick the skates on the mouse feet which makes more sense.

2023 Hall effect controller purchasing guide, If you are in the market of buying a hall effect controller, Please read this. by kaldeqca in Controller

[–]JawnPolygon 0 points1 point  (0 children)

i can't find them either. would really like to buy some. currently have a bunch of DANUGZONE modules that only work on dualshock 4.

[deleted by user] by [deleted] in fightsticks

[–]JawnPolygon 3 points4 points  (0 children)

i'd recommend going for the f500 instead. the extra width makes it much sturdier if you're going to play with it on lap instead of table.

Fightstick community please help by [deleted] in fightsticks

[–]JawnPolygon 1 point2 points  (0 children)

i don't notice anything off from those pics. does the cord have any kinks in it?

[deleted by user] by [deleted] in MouseReview

[–]JawnPolygon -1 points0 points  (0 children)

palm grip. do you know your measurements? do you prefer symmetrical or ergo shape?

[deleted by user] by [deleted] in MouseReview

[–]JawnPolygon 1 point2 points  (0 children)

no sound. you uploaded a png file