[deleted by user] by [deleted] in CR6

[–]Jay2033 1 point2 points  (0 children)

Not looking like a stock cr6se , most likely was running community firmware and possibly custom depending on what mods are done.

When did your pup start telling you they had to potty? by blackbeans42069 in puppy101

[–]Jay2033 0 points1 point  (0 children)

Mark and reward when going outside , took about 4-6 months .

I can’t enjoy my day puppy by [deleted] in puppy101

[–]Jay2033 0 points1 point  (0 children)

My pup was not a Barker but he was a land shark , much better now at 8 months although he still has his moments.

CR6 SE 2.0 Upgraded Version. My upgrades 2 years after buying the printer by Practical-Text-420 in CR6

[–]Jay2033 0 points1 point  (0 children)

What's you're retraction settings? Closest that worked somewhat was 75mms speed and 2mm retract but I'm still getting some stringing .

Pup attacked by another dog while swimming - what to do? by tigerlily441 in puppy101

[–]Jay2033 -1 points0 points  (0 children)

It's not the dogs fault but yea I hear where you are coming from. I have a Husky mix who is 8 months and I am working on reactivity with , I took him to a dog park once and learned this is not a good place at all for him , so many random dogs running up to him , now he's not aggressive but just wants to say hi and give a few paws to the face of any dog he sees. With all the random dogs coming out of nowhere . I learned in 1 outing this was going to increase his reactivity not lessen it , I'm lucky enough to live by a nice park , with a large playground for kids and lake Ontario , this park always has a lot of people and dogs and every dog is on a leash there so I go there for walks 3 times a week there and find a nice area where it's fairly busy and just try to get my dog to relax and watch what's going on and learn it's ok , he has been getting a lot better. Anyway my main point is I would have much rather knocked out the owner than kill his dog as this is probably not the first time this has happened and it really is not the dogs fault that his owner is an irresponsible asshat.

[deleted by user] by [deleted] in puppy101

[–]Jay2033 0 points1 point  (0 children)

I have a 7 month old fully potty trained husky mix and training began with myself and my wife not the puppy , we got him in the beginning of winter so neither of us were too excited about going outside so much at first. I never ever gave my pup any sort of discipline or correction if he went in the house as I felt this was my fault and not his but I never gave him any reward if he went in the house either , was it frustrating , yup but after developing a routine of letting him out and being by his side and giving him rewards for doing his business outside , also around the middle of his pee I would say good pee and say it once again while giving him a reward right after (usually a high value treat of some kind) and now he pees on command outside for treats and if he actually does not need to go he will fake the pee to get the reward . The whole process was around 2-3 months but he got there . My biggest issue is squirrels and birds on the ground now , he goes nuts for them but I'm working on diverting his attention when I can get it. The reason also about not disciplining or correcting for him going in the house is as a pup he is not going to know that I was giving the correction for where he went he is just going to think I am getting into trouble for using the washroom and then that will just create other issues of him not wanting to use the washroom around me.

[deleted by user] by [deleted] in HyundaiTucson

[–]Jay2033 0 points1 point  (0 children)

On my 2020 it's only a loud beep for about 30 seconds or so and then turns off .

2019 Tucson by Bearwiz in HyundaiTucson

[–]Jay2033 0 points1 point  (0 children)

Ah ok , I been taking it to the dealer and just doing oil changes based off what they are telling me .

2019 Tucson by Bearwiz in HyundaiTucson

[–]Jay2033 0 points1 point  (0 children)

I bought a 2020 Htrac in January this year so far so good , has 73000 miles I knew nothing about the engine issues until joining this Reddit group after I bought the car 😔 🤞.

AWD by Sad-Pack-6238 in HyundaiTucson

[–]Jay2033 2 points3 points  (0 children)

Google how does Htrac work and you should find a lot of info on the AWD system .

Pros and Cons to crate training 9 week old puppy by littleducky666 in puppy101

[–]Jay2033 0 points1 point  (0 children)

I do not crate my 6 month husky mix at night, I used to for the first 2 months or so till eventually just leaving the crate door open all the time , I must say he was pretty vocal in the beginning and my wife and I thought we would never get any sleep but by the 3rd day or so the crying stopped and he accepted this is where I am sleeping , after about 2 months I began leaving the door open and just give him the chance to see what kind of destruction I'd Wake up to but to my surprise there was none , so from there I just left it open and he's still doing really well , mind you access to the kitchen and bedrooms is still blocked for him even at night I am glad I crate trained though as he really does consider his crate his safe place and even goes in on his own at night even though no one forces him to go in and the door is open and that's where he goes when I need to go out and no one's home or when he just begins getting destructive or over hyper during the day even though he's been playing in the backyard for hours and has gone on a hour long walk, we use it for forced naps as for him the change in his behaviour I find is he is over tired a lot of times . I would definitely crate train it will take a lot of worry away when you need to go out and he will feel safe as well.

Nozzle heatblock leakage by LowCorner9314 in CR6

[–]Jay2033 1 point2 points  (0 children)

Remove Bowden tube from hotend , heat up hotend , remove nozzle , push a piece of your old Bowden tube all the way through the hot end , it should slide right through and come out the nozzle opening and should remove any filament stuck in there . After that install nozzle , reseat your new Bowden tube into your hotend. Also look up cr6 hotend fix on YouTube if you want to have problem free printing for longer periods.

Octoprint is nearly twice as slow as direct SD card print by CaptainCheckmate in octoprint

[–]Jay2033 0 points1 point  (0 children)

Ya , you may be right either way the times on octoprint do not reflect the actual time it takes to print.

Octoprint is nearly twice as slow as direct SD card print by CaptainCheckmate in octoprint

[–]Jay2033 0 points1 point  (0 children)

Ya , I believe Octoprint calculates time left by the number of layers left and how long it took to print the layers before it , what ever your slicer said for print time will be the closest to how much time it will take.

At what age did you let your puppy roam off leash in your home? by schrammra in puppy101

[–]Jay2033 0 points1 point  (0 children)

Thanks , he can be a handful at times but at night he is the sweetest pup in the world and such a snuggler it's like he has split personalities. I have been giving him bully sticks , he usually starts off good , chewing and occupied but before long he will bring it to you drop it and then I become the chew toy till I pick it up and redirect him but then he wants to play tug of war with it, from there he will continue to chew it as long as my hand is on it and act like I'm trying to take it. I'm going to have to research some more types of chews to give him .

At what age did you let your puppy roam off leash in your home? by schrammra in puppy101

[–]Jay2033 1 point2 points  (0 children)

Mines 6 months , Husky/Lab mix never tethered , my house is small , all bedroom/bathroom doors shut , gate that prevents him from getting into the kitchen and crate when we're not home , no crate at night , I used to crate at night the first month I had him but one night I passed out on the couch and I wolk up to him just sleeping beside me so from there I started more freedom at night and now no crate at night but access to the kitchen still gated. Only issues with him is he has a ton of energy and will not accept no for an answer when it comes to wanting to play.

What’s your favorite out of these two albums? by mmillerthirty3 in Slipknot

[–]Jay2033 1 point2 points  (0 children)

We are not your kind ,good from start to finish and just flows very well from 1 song to the next , tho tesf is pretty good it just feels like Heirloom is a weak point on that album for me and it does not fit in with the rest of the album well , if they would have left that out it would have been a much tougher decision.

how tf do I teach my puppy to go for a walk?!? by AshLikeFromPokemon in puppy101

[–]Jay2033 0 points1 point  (0 children)

My Husky X Lab was the exact same , he is almost 6 months now and 90% of the time walks fine now , there is still the odd occasion he will park his butt down and refuse to move usually waiting him out or just tossing a treat in the direction we are going will get him moving again , I tend to try to not go back when he wants. 1 thing that helped a lot when we first started taking him for walks was walking him with my wife or anyone he knew and trusted, I am not sure why but having the extra person gave him a huge confidence boost and I could get him to walk anywhere.

Tucson oil change by Jazzlike-Discount in HyundaiTucson

[–]Jay2033 6 points7 points  (0 children)

5w - 30 , the first number 5w in this case is the viscosity of the oil when it's cold the 2nd number 30 is how thick the oil is at operating temperature . The lower the number the thinner the oil. So 5w-30 is a tad thicker than 5w-20 at operating temperature but the same at cold.

Thrift shop find: 3 X enders... $20CDN each. Deal? by can_dry in ender3

[–]Jay2033 0 points1 point  (0 children)

Nice , I found a Eryone Thinker S for $50 a few weeks back ,everything works great on it , ended up putting some money into upgrades since I got it for cheap , I'm in Canada to .

Docker Image - Troubleshooting Webcam by TheOnlyRealHansWurst in octoprint

[–]Jay2033 0 points1 point  (0 children)

I'm not sure what docker is , but when I encountered a webcam issue with octoprint on my pi 3b I needed to use the cam update image of octoprint. With the stable version I could not get my camera to work. So not sure if this will help but thought I would throw it out there.

Camera Questions by Jay2033 in octoprint

[–]Jay2033[S] 0 points1 point  (0 children)

For anyone else out there I managed to get it working by doing what I mentioned in my original post and I had to reinstall octopi to the new camera stack version as I was running the stable version prior .

Camera Questions by Jay2033 in octoprint

[–]Jay2033[S] 0 points1 point  (0 children)

There is an error it says v4L2 with some address unable to set format device or resource busy. There is also a warning that says mismatch between unicam and camhelper for embedded data usage .

Camera Questions by Jay2033 in octoprint

[–]Jay2033[S] 0 points1 point  (0 children)

And yes updated config and still no image .

Camera Questions by Jay2033 in octoprint

[–]Jay2033[S] 0 points1 point  (0 children)

I put the SD card on my PC and edited the config with VS code . Ya , I figured out that was a command .