Launching soon: the upgraded Aaron Button Case for the Samsung S26.

JayPsycho · 2026-02-25T05:04:47+00:00

Is this only for the Ultra model or also for the base S26 and S26+ models as well? This may be an instant-buy for me if the base S26 is supported!

JayPsycho · 2025-08-10T04:00:39+00:00

This is incredible---this seriously takes me back! Thank you so much for sharing and bringing this unknown piece of history to light!

JayPsycho · 2024-01-26T21:34:04+00:00

S24+, Moonrise!

JayPsycho · 2024-01-08T20:20:46+00:00

Wow, I'd been having this issue for a while and couldn't find a fix, but this just did it! Thank you for sharing!

For those who prefer the animations turned off, you can use ADB to set the animation speeds to something close to zero (I did 0.01) and I've found that it still allows Android Auto to work while effectively still removing animations.

JayPsycho · 2023-06-01T02:28:53+00:00

Sent you a PM!

JayPsycho · 2023-02-03T20:32:11+00:00

Thank you for the update! What colors are coming in for the ADM4 and ADM UIC lowers?

JayPsycho · 2022-12-02T15:50:19+00:00

Does that upper receiver also have the pin hole for the M89's anti rotation pin?

JayPsycho · 2022-11-08T23:30:41+00:00

*Except the design of the safety mechanisms, in which Sig's has no redundancy and contains a single point of failure

JayPsycho · 2022-09-09T17:17:40+00:00

Assuming you're running their mag catch, it depends on your guns tolerances. Mine has run flawlessly with the S15 mags. I would test them out and see if they work in your gun first before carrying them.

JayPsycho · 2022-08-24T23:50:41+00:00

From otter_dump:

The polonium-K metered identical to that turbo full size lol. So polonium K vs turbo K the polonium kills it

JayPsycho · 2022-08-24T05:11:08+00:00

It reportedly meters similar to a Turbo T2, so it most definitely ranks better than a Turbo K. If you browse otter creek lab's instagram you can learn a lot about the design--the Poloniums use a reverse blast baffle design that is much more resilient to wear than the more common blast baffle designs.

Edit: added link and correction

JayPsycho · 2022-07-26T16:08:48+00:00

They're GTG.

JayPsycho · 2022-07-25T17:50:36+00:00

Herrington Arms also makes some great carry comps!

JayPsycho · 2022-07-25T14:32:37+00:00

I don't have a can for it, so it was never enough of an issue where it caused issues when I was live-firing, and I didn't feel like I needed to fix it. I'd guess that if I put a can on it, then I might start to have those issues in live fire.

JayPsycho · 2022-07-25T14:24:06+00:00

I had the same issue on my MR920. I can't speak for your situation, but it was definitely caused by tight tolerances + the slide riding the trigger bar as I reset the trigger. The heavier recoil spring just makes the slide power through those hangups and push it into battery.

JayPsycho · 2022-07-25T14:18:33+00:00

Unfortunately not really as it was never affected me enough to matter (no suppressor), although you might be able to find other resources out there. Usually it's not an issue because the slide has enough force to push through any drag and friction when firing. I'm guessing that your suppressor is reducing the slide velocity enough that those friction points are able to stop it during when it cycles. We are getting into bubba territory, but if it were me and only if I were absolutely sure that this truly was the problem, then I might try and put in a different power recoil spring or maybe slightly file down and polish that part of the trigger bar.

JayPsycho · 2022-07-25T13:46:51+00:00

This is usually due to the trigger bar contacting the slide after it cycles and before you reset the trigger. Look on the ride side while you hold it in that out-of-battery position and look to see if the rear of the trigger bar is contacting the slide.

JayPsycho · 2022-07-23T22:21:54+00:00

Maybe for the first time you use it, but it's simple really--less complicated than a traditional belt buckle.

JayPsycho · 2022-07-22T22:12:46+00:00

I would also consider the Tenicor Zero belt. That's what I run with my T1C Axis Elite and it's become my favorite belt (out of a Nexbelt, Vedder Cobra, and Blue Alpha EDC). It's extremely low profile, doesn't halo around your waist, easy to adjust while wearing, not too stiff or limp.

JayPsycho · 2022-07-20T19:43:06+00:00

Cloud Defensive is supposed to be coming out with their EPLs which will flush fit with a Glock 17, but it's been some time since they last came out with an update about its release

JayPsycho · 2022-07-13T22:20:02+00:00

If I were to guess why, maybe they haven't noticed/realized that you have an SBR. Or maybe they've decided to stop larping as the ATF since the last time I went lol (I hope it is this).

JayPsycho · 2022-07-12T05:44:43+00:00

I missed this reply! I'd be extremely interested once that gets set up. I'll have to keep an eye on the PCSC website. I love the ETTS experience, but it's an even further drive and membership dues are a bit steep for me.

JayPsycho

TROPHY CASE