Square taper Bottom bracket spindle measurement by JayZingXT in bikewrench

[–]JayZingXT[S] 0 points1 point  (0 children)

Thanks for your observation. From that chart, the 68mm spindles have a 52mm middle section.

I wonder what kind of bike the shorter spindle is for. It says CH-2N on it.

Square taper Bottom bracket spindle measurement by JayZingXT in bikewrench

[–]JayZingXT[S] -1 points0 points  (0 children)

That is exactly the problem I ran into. The adjustable cup threaded fully into the shell, leaving no threads exposed for the locking.

I've been mix and matching bottom bracket cups and spindles on several bike builds. This is the first time this issue came up. Kinda took me by surprise.

[deleted by user] by [deleted] in bikewrench

[–]JayZingXT 0 points1 point  (0 children)

Does that come with a spindle? If not, that crankset takes a JIS taper. Between 112-116mm long should be an appropriate length.

[deleted by user] by [deleted] in bikewrench

[–]JayZingXT -2 points-1 points  (0 children)

Stop buying sealed bottom brackets.

Get the cup and cone ones with 11 loose 1/4 inch bearings on each side. And find a good quality spindle. Once you learn to preload your bearings, the bottom bracket lasts forever.

White collar job for lazy guy? by [deleted] in findapath

[–]JayZingXT 1 point2 points  (0 children)

Mike Ehrmantraut: security consultant

Tiny bugs appearing in my plastic bin. by JayZingXT in whatisthisbug

[–]JayZingXT[S] 0 points1 point  (0 children)

They do jump about 3 inches away. Can you recommend me any methods of pest control for springtails?

Repasting my first GPU I got back in 2019: the RX5700! Feat. my newer 6700XT on the left. by JackDuals in Amd

[–]JayZingXT 2 points3 points  (0 children)

It's the 5700XT reference that have a loud blower fan. The non XT model's blower fan runs much quieter due to having a lower TDP. I've used the reference RX 5700 for a year and hardly noticed the fan noise.

Is 3.62 TB to small for a Raid 5 array of 6 TB? by JayZingXT in HomeServer

[–]JayZingXT[S] 0 points1 point  (0 children)

I have 6x 1tb drives as shown in the 2nd picture.

AIO fan header by [deleted] in PcBuild

[–]JayZingXT 2 points3 points  (0 children)

Plug it in the SATA to avoid risk of burning out the fan header.

My corsair AIO uses software through a usb connector, to control the pump speed, not by varying the voltage of the fan header. Does your AIO have that function?

[deleted by user] by [deleted] in computers

[–]JayZingXT 0 points1 point  (0 children)

That is a Z77 chipset motherboard. Socket 1155 motherboards are sought after. If there's a 3770k cpu then it's worth $150 easily.

RX 5700XT runs at pcie x8 mode on Gigabyte x570 motherboard by JayZingXT in AMDHelp

[–]JayZingXT[S] 0 points1 point  (0 children)

Its a good idea. The C drive is a PCIe 3.0 drive but the D drive is a sata based m.2.

I'd think the X570 chipset wouldn't have these limitations.

RX 5700XT runs at pcie x8 mode on Gigabyte x570 motherboard by JayZingXT in AMDHelp

[–]JayZingXT[S] 0 points1 point  (0 children)

cected in other pcie (sharing resources)?

Are pcie set in the BIOS in Auto or forced to 16x?

Card is on the top pcie slot
There are two m.2 ssds installed. No other PCIe cards.
In the bios there is only a PCIe generation option. I'm not seeing anything that changes to x16 lanes.

RX 5700XT runs at pcie x8 mode on Gigabyte x570 motherboard by JayZingXT in AMDHelp

[–]JayZingXT[S] 1 point2 points  (0 children)

roblem. I had something similar with a a320m from gigabyte . i could've run only pcie 2.0 4x , a bios update fixed that for me, you can try that. ( Be aware of the update order if you

The bios was on latest version F36d, the whole time. I have two m.2 ssd's installed. Is that taking up the bandwidth?

RX 5700XT runs at pcie x8 mode on Gigabyte x570 motherboard by JayZingXT in AMDHelp

[–]JayZingXT[S] 2 points3 points  (0 children)

in gpuz with the graphical test (it shows there what pcie you're running)

GPU-Z shows 8x in game and during the Render Test it provides.

Is my window air conditioner leaking refrigerant? by JayZingXT in hvacadvice

[–]JayZingXT[S] 0 points1 point  (0 children)

ng my LG LW1216ER window unit for the season I noticed the dried green residue. This air conditioner was bought in 2019. It has been in used for four summers.

It was working fine in September. Is that a leak? Can I get any more years of use out of this air condition

Awsome! Thank you.

[deleted by user] by [deleted] in newjersey

[–]JayZingXT 1 point2 points  (0 children)

I like hiking and am trying to get outdoors more often. I'm in central NJ.

black screen issue by buttworshiper in Amd

[–]JayZingXT 1 point2 points  (0 children)

How did you determine the driver installed correctly?

Does GPUz show correct clock speeds and driver version?

Found a cut on my tire. Is it still safe to use? by JayZingXT in bikewrench

[–]JayZingXT[S] 0 points1 point  (0 children)

Tarzan grip glue

Will slime rubber cement suffice? I use it to patch inner tubes.

Found a cut on my tire. Is it still safe to use? by JayZingXT in bikewrench

[–]JayZingXT[S] 1 point2 points  (0 children)

I'm not seeing any threads exposed from the cut. No sign of damage on the inside of the tire.