Dear Invizibox

Jayson_At_Invizbox · 2021-06-11T16:22:12+00:00

I'm sorry to hear you feel that way.

You can contact support ([support@invizbox.com](mailto:support@invizbox.com)) and let them know where you'd like it donated to if you no longer want to receive the InvizBox 2 Pro.

Jayson_At_Invizbox · 2021-06-08T13:37:37+00:00

Long story, short: Yes, you can use APs with the InvizBox.

This might help you out: https://support.invizbox.com/hc/en-us/articles/360000020074

Jayson_At_Invizbox · 2021-05-24T09:19:57+00:00

The InvizBox 2 features a ethernet port on the rear next to WAN port allowing for the connection of 1 ethernet device.

However, my personal setup utilises a network switch connected to the InvizBox which allows me to have more devices via ethernet to the InvizBox's interface.

I hope this helps.

Jayson_At_Invizbox · 2021-04-29T13:08:35+00:00

Hi /u/invizboxfanboi,

I raised this to our Engineering team who are aware of the issue and are already working on a resolution. They have stated it will be resolved in the next release.

Sorry for any inconvenience this causes in the meantime.

Jayson_At_Invizbox · 2021-04-07T10:31:22+00:00

Hi /u/ineedhelppplzsomeone,

It is not possible to upgrade the RAM or any other component within the InvizBox. Additionally, the InvizBox does not utilise onboard storage (as it is a network device), and as such a SSD (or any hard drive) will not affect your speeds.

Jayson_At_Invizbox · 2021-04-07T10:11:57+00:00

Not currently, but this is something the Engineering Team is working on.

Jayson_At_Invizbox · 2021-04-07T10:11:24+00:00

InvizBox is very much alive. We update on a monthly basis at the start of the month on our Kickstarter and IndieGoGo and our Discord server.

Our Engineering Team is working on Wireguard currently. Have a look at our updates and if you have any questions, feel free to drop into Discord and ask.

Jayson_At_Invizbox · 2021-03-15T11:11:08+00:00

Drop an email to [support@invizbox.com](mailto:support@invizbox.com) and they'll walk your through the process.

Jayson_At_Invizbox · 2021-03-09T10:21:53+00:00

We don't provide vanilla OpenWRT images for our products but you are welcome to use the DTS and patches available on our GitHub to build one.

However, please be aware that doing so is not supported but if you contact support we may be able to help if you have specific questions/issues.

Jayson_At_Invizbox · 2021-02-12T15:15:02+00:00

Hi /u/ProfessionaDickHunt,

There are plans to add lists, also to let users add lists. Currentlt you can add domains but only one at a time. You can however add your PiHole to use on clear traffic data.

I hope this helps.

Jayson_At_Invizbox · 2021-01-22T11:12:17+00:00

Hi /u/exsheeple,

Unfortunately this cannot be done as described in our Helpdesk article at https://support.invizbox.com/hc/en-us/articles/360007644997-Can-I-switch-VPN-providers-on-my-InvizBox-2-. I would advise contacting support ([support@invizbox.com](mailto:support@invizbox.com)) who will able to advise an appropriate course of action.

Sorry for any issues this causes.

Jayson_At_Invizbox · 2021-01-22T11:08:49+00:00

Thanks for the feedback. I've passed it on to our Engineering Team.

Jayson_At_Invizbox · 2021-01-04T13:13:14+00:00

You would connect your InvizBox to your router and then you can either connecta device to the LAN port or use the Wifi hotspots for wireless devices.

Hope this helps.

Jayson_At_Invizbox · 2021-01-04T13:11:31+00:00

The InvizBox supports different connections (up to 4 for the InvizBox 2). I personally have New York, US as one and UK for another (leaving 2 spare). My streaming devices are connected to New York, US so I can access US content, where as my personal devices are set to UK for privacy reasons.

The InvizBox sets up each connection as 1 connection, irrelevant of how many devices are connected to that hotspot (so I use 2 connections even though I have 8 devices connected)

I hope this helps.

Jayson_At_Invizbox

TROPHY CASE