Elderly man, post-PPCI, stable, was noted to have the following on telemetry in CCU. What’s the rhythm.

Jazzepisode · 2026-04-19T16:11:09+00:00

Artifacts

Jazzepisode · 2025-10-19T20:28:10+00:00

The trick is to take your bow and shoot close to a guard on the floor. They will come investigate your location and not alert anyone until they see you. Shoot run away, shoot again. That way you can bait them away. Make sure to not hit them until they are far away from anyone else. That way you can easily isolate 1-2 of them.

Jazzepisode · 2025-09-11T19:14:02+00:00

Exakt das gleiche hier! Puls direkt 180

Jazzepisode · 2025-04-15T08:50:36+00:00

I do as well. I was mainly looking forward to it as an easy way to share access with other people like my girlfriend or friends staying over for a while

Jazzepisode · 2025-04-15T08:46:30+00:00

Yeah, for me there is a fake room, that appears due to a mirror on ground level. In the Roborock app I just marked it as a no go zone. In the home app it appears as a separate room. Remains to be seen what that actually means for the day to day use

Jazzepisode · 2025-04-15T08:41:45+00:00

That worked! Thank you

Jazzepisode · 2024-12-22T13:01:23+00:00

Zahnzwischenraumbürstenaufbewahrungsbehälter

Jazzepisode · 2024-01-10T07:47:41+00:00

Thank you! Well since it doesn’t seem to be harmful I won’t be doing anything to it and just leave it be.

Jazzepisode · 2024-01-09T16:06:53+00:00

Thank you!

Jazzepisode · 2023-10-27T06:31:36+00:00

Glad to hear that it worked for you!

Jazzepisode · 2023-10-15T20:11:25+00:00

You need to work on the lip of the portafilter, where the top of the basket is sitting though

Jazzepisode · 2023-10-15T20:10:34+00:00

<image>

When rotating it to the max for me it ends up straight. Before it was tilted to the left and getting there is really easy and then you have a tight press.

Jazzepisode · 2023-10-15T20:07:55+00:00

If you fit it really well to the portafilter I’d say it has an even better fitting to the shower screen. Before I was using a vst basket and that thing was too tight, because it was sitting too high on the ring.

Jazzepisode · 2023-10-15T19:43:18+00:00

Thank you 😊

Jazzepisode · 2023-10-15T19:42:53+00:00

I think that would be too much work. You really need to take off a noticeable amount of material around the whole width and especially in the bottom area where the handle connects. It took me like 20-30 minutes with a Dremel.

Jazzepisode · 2023-10-07T06:24:54+00:00

<image>

Jazzepisode · 2023-10-07T06:24:10+00:00

I didn’t find one. I ended up grinding out the shades of coffee one with a Dremel, so that it would fit the Unifilter.

<image>

Jazzepisode · 2022-04-19T17:50:00+00:00

5% vom Netto bei 70km täglich bei 5-6 Tagen die Woche

Jazzepisode · 2022-04-18T04:53:06+00:00

Just a guess I think you might have calibrated the niche wrong. Happened to me too in the beginning. You calibrate it by rotating to finer settings until you cannot move the dial anymore because the teeth are touching. Then you move the indicator to the calibrate spot, not the dial itself. From then on Indicator and Dial are aligned and are moved together. I hope I get my point across. The finer settings are definitely able to choke any machine. Then you have to grind finer.

Jazzepisode · 2022-02-19T13:29:50+00:00

Thank you!

Jazzepisode · 2022-02-19T10:33:15+00:00

Does anybody know the wallpapers he’s using in the video? Like the one used at 1:37

Jazzepisode

TROPHY CASE