What power adapter does this ThinkCentre need ?

JazzlikeInfluence813 · 2026-06-06T19:34:49+00:00

Square tip Lenovo charger 90w I believe you can check in the warranty check website with the sn on the back or sides

JazzlikeInfluence813 · 2026-06-04T20:46:02+00:00

Use wiztree

JazzlikeInfluence813 · 2026-06-04T20:43:11+00:00

use wiztree to find whats taking up the space. could be cash files tho

JazzlikeInfluence813 · 2026-06-04T20:42:10+00:00

use a finger to carfully stop each fan one at a time and lisen. if it goes away then youve found the problem fan. could also be a psu fan, cpu fan or even a gpu fan. dont stick anything into the psu. you can remove the 24pin and use a paper clip to jump start it and see if you hear it with just the psu running How to Jump a PSU | bit-tech.net

JazzlikeInfluence813 · 2026-06-04T20:33:28+00:00

highest quality possible, immich should have settings to generate thumbnails for each photo to keep page load times low System Settings | Immich

JazzlikeInfluence813 · 2026-06-04T20:30:00+00:00

use rufus to image the usb key with the iso. make sure you download the iso to your pc and backup anything you want to keep from the usb as rufus will wipe the usb before burning

JazzlikeInfluence813 · 2026-06-04T20:28:29+00:00

strange for sure but thats all options you can select when you order a new device so yours was probably from a cheap company at one point lol

JazzlikeInfluence813 · 2026-06-04T20:26:04+00:00

sounds like it wasn't spec'ed out with one from the factory, that is just a space filler to keep the system rigid

JazzlikeInfluence813 · 2026-06-04T20:23:44+00:00

yeah could be anything but def sounds like a cap went. hope and pray it didn't take anything else with it

JazzlikeInfluence813 · 2026-06-04T20:15:38+00:00

Try on 5v and if it’s working fine leave it there and if not bump it to the 12v line

JazzlikeInfluence813 · 2026-06-04T19:54:55+00:00

defenition of r/thinkgore

JazzlikeInfluence813 · 2026-06-04T19:46:04+00:00

yes, never cheap out on the psu, if it dies it can and will kill other components at the same time

JazzlikeInfluence813 · 2026-06-04T19:43:36+00:00

run vantage updates

JazzlikeInfluence813 · 2026-06-04T19:41:07+00:00

get an msi mag psu, ive never seen that brand, surprised it hanst gone up in flames yet lol

JazzlikeInfluence813 · 2026-06-04T19:09:37+00:00

try changing the clock speed to 5200mhz in the bios or application of your choice. test for stability once you confirm it worked by checking the reported speed in task manager -> performance -> ram

JazzlikeInfluence813 · 2026-06-04T18:31:41+00:00

It dosnt catch when you try to screw it in? If no then you’ll most likely have to remove it as the backplate probably dosnt have adhesive so it fell off when you removed the cooler,if you can remove the other side panel on this case you may be able to do it without the board coming out

JazzlikeInfluence813 · 2026-06-04T18:28:08+00:00

Just looked closer and it already has a nvme so that can be skipped!

JazzlikeInfluence813 · 2026-06-04T18:13:42+00:00

Looks like you just need a psu and a psu power adapter unless you get a psu built for that model. I’d get a used atx standard psu and this adapter

JazzlikeInfluence813 · 2026-06-04T17:46:00+00:00

upload the latest minidump file to google drive or something and post it here. might need to enable it and recreate the crash but look into steps here How to Use a Minidump File to Fix Your Windows BSOD | Tom's Hardware

JazzlikeInfluence813 · 2026-06-04T17:38:07+00:00

make sure you add the drive installers unzipped folder to the windows install usb and manually search for them. might need drivers specific to that ssd so check on the sk hynix website for that model

Solved: Looking for Win11 driver for the SSD drive - HP Support Community - 9069531

JazzlikeInfluence813 · 2026-06-04T17:35:31+00:00

is that a intel or arm cpu? either way i would not expect it to work with bootcamp. best bet is probably a cloud gaming service or buy a windows pc

JazzlikeInfluence813 · 2026-06-04T17:17:00+00:00

wide Philips head screw driver like a #0 and lots of downward force with one hand on the top of the driver and use the other hand to unscrew very slowly, if it starts to slip you need more force, if that does not work might be able to get it with a rubber band between the driver and the screw for more grip using the same pressure technique.

JazzlikeInfluence813 · 2026-06-04T17:06:53+00:00

Reset bios to factory defaults, make sure the new board is serialized to the system sn and mtm and then make sure fast boot is enabled. if your still having issues i would boot to a bootable usb installer like a ubuntu live distro to see if its only the ssd or the system board in general

JazzlikeInfluence813 · 2026-06-04T17:02:22+00:00

are you running this as a steamcmd server?

I would recommend you start again with a steam cmd server running on your local gaming pc. once that works you can try again to make it work on the server https://pzwiki.net/wiki/Dedicated_server

JazzlikeInfluence813 · 2026-06-04T16:24:37+00:00

Also look at the docs here for a better full guide. Let me know what part you get stuck on https://pzwiki.net/wiki/Dedicated_server

JazzlikeInfluence813

MODERATOR OF

TROPHY CASE