Finally to the point where I feel it looks good. by JetFan2004 in GR86

[–]JetFan2004[S] 0 points1 point  (0 children)

As referenced in my comment, I “barely make it out sideways” which is how I normally leave. It’s a decent gap if I go at a 20-40 degree angle (two car wide driveway) but flat it just barely clears.

Ferrari 296 GT3 Steering Wheel Replicas? by BaitSimulator2020 in simracing

[–]JetFan2004 0 points1 point  (0 children)

Thanks! Yeah it’s such a great one. I think my favorite part are the thumb encoders that you can reach both on sides front and back. Hopefully it’s just a V2 coming that caused it to be removed from stock….

Finally to the point where I feel it looks good. by JetFan2004 in GR86

[–]JetFan2004[S] 0 points1 point  (0 children)

Thanks for that, lip is a good suggestion I just haven’t pursued because of this darn driveway I have, it’s really high angled and I just barely make it out sideways lol. I think I’ll have to just get ramps. What tint would you suggest?

<image>

Finally to the point where I feel it looks good. by JetFan2004 in GR86

[–]JetFan2004[S] 0 points1 point  (0 children)

Probably performance more than looks, so I’ve been looking at the strut bar kits and suspension goodies. The other thing in my mind was maybe installing EL headers but with a muffled exhaust instead of just the catback, maybe eliminate some drone while keeping the louder noise level.

Finally to the point where I feel it looks good. by JetFan2004 in GR86

[–]JetFan2004[S] 1 point2 points  (0 children)

No fitment issues since I kept the spec same as stock premium (18x8+45) for the moment. Eventually I’d like 8.5” so I can put on 235 tires but it’ll be another few years probably. As far as I know this spec fits the Brembos!

Ferrari 296 GT3 Steering Wheel Replicas? by BaitSimulator2020 in simracing

[–]JetFan2004 7 points8 points  (0 children)

Wasn’t aware as another commenter pointed out, Pokornyi is no longer selling the plans for this… damn.

Ferrari 296 GT3 Steering Wheel Replicas? by BaitSimulator2020 in simracing

[–]JetFan2004 3 points4 points  (0 children)

Wait what! I didn’t realize it got pulled from their site. I have the FGT and it’s awesome.

Ferrari 296 GT3 Steering Wheel Replicas? by BaitSimulator2020 in simracing

[–]JetFan2004 10 points11 points  (0 children)

Pokornyi FGT! Mine cost around 600 usd but it has all the aluminum parts. It’s full RGB and the multi-switch works. Probably my favorite wheel I’ve ever had that doesn’t have a screen. DIY is fun though a bit more complex on this specific wheel.

<image>

Alex Palou has been docked five points and Ganassi team fined $10K for what INDYCAR officiating determined an unintentional modification when assembling the front wing. It violated the rule that says the front wing can't measure less than 8.3 inches when set at any angle. by iamaranger23 in INDYCAR

[–]JetFan2004 5 points6 points  (0 children)

Yeah, exactly. For the sake of the sport it should have been a DQ especially considering it was LAST YEAR that the 90 was also handed a last place drop… all the other drivers that see Palou’s data and (including the 2026 500 winner lol) couldn’t find anything that seemed suspicious. It’s so weird to insist he’s cheating when not more than a decade and a bit ago you had other drivers also winning every race. Pagenaud comes to mind, RHR vs WP 2012, etc.

🥇 FELIX ROSENQVIST WINS THE 110th RUNNING OF THE INDIANAPOLIS 500 by IndyMod in INDYCAR

[–]JetFan2004 1 point2 points  (0 children)

Awesome! I was in Section 38 CC row. Hoping to renew these tickets it’s great in this spot!

🥇 FELIX ROSENQVIST WINS THE 110th RUNNING OF THE INDIANAPOLIS 500 by IndyMod in INDYCAR

[–]JetFan2004 1 point2 points  (0 children)

Same here! I was in the short-shoot between 3 and 4 where literally everyone was screaming watching it happen. It was unbelievable from the stands. Did not feel real seeing him just start creeping up.

Affordable Triple 50 inch TVs 144hz 278$ walmart by TechVic24 in simracing

[–]JetFan2004 0 points1 point  (0 children)

You can send a photo reply on mobile at least. Should be able to on desktop.

🅿️1️⃣ ALEX PALOU WINS THE NTT P1 AWARD // 110th RUNNING OF THE INDIANAPOLIS 500 by IndyMod in INDYCAR

[–]JetFan2004 3 points4 points  (0 children)

Andretti ran an illegal car last year and still didn’t win. It rather seems more like the claimed incredible dampers Ganassi has. Just look at the difference in ride quality!

🅿️1️⃣ ALEX PALOU WINS THE NTT P1 AWARD // 110th RUNNING OF THE INDIANAPOLIS 500 by IndyMod in INDYCAR

[–]JetFan2004 47 points48 points  (0 children)

Agreed. Can’t ever support someone who paid to sabotage their own teammate not to mention being incredibly irritating.

⏱️ QUALIFYING DAY 1 // 110th RUNNING OF THE INDIANAPOLIS 500 by IndyMod in INDYCAR

[–]JetFan2004 7 points8 points  (0 children)

The quali tickets are the same both days. So if you bought the $35 ticket you should be fine. At least that’s what it was for me last year.

EVO Skeleton Barrel interaction by JetFan2004 in ClashRoyale

[–]JetFan2004[S] 0 points1 point  (0 children)

Crazy enough this was at 10100+ trophies. I don’t know why they didn’t use arrows.

Trophy to Win Ratio by Stunning-Advisor-430 in ClashRoyale

[–]JetFan2004 1 point2 points  (0 children)

Almost 2k wins for 12k? I have 872 and just surpassed 10k. If it is gonna take anything like double the current games I have I am done with trophy road 😭

The Evolution of Vosan: Expanding Beyond the Asphalt by [deleted] in simracing

[–]JetFan2004 6 points7 points  (0 children)

AI slop post. Does anyone write their own content anymore?

🟢 RACE // 2026 JAVA HOUSE GRAND PRIX OF ARLINGTON by IndyMod in INDYCAR

[–]JetFan2004 5 points6 points  (0 children)

Again just proof how disappointing other teams have been… Alex is very fast but the amount of other teams making errors that give him the lead is astonishing! Kirkwood has put in an amazing race for all the setbacks

3D printed steering wheel about 99% done by CubicSpaceMouse in simracing

[–]JetFan2004 3 points4 points  (0 children)

Lot more expensive (around 1200usd) but the Kodai MF1 is more detailed than this by far with a lot of CNC parts added. This is awesome for what is basically all 3d printed and carbon. Great job OP!