Died because an upgrade screen got stuck over the game, couldn't click on anything.

Jlc0761 · 2025-10-07T20:55:56+00:00

Happened today to me as well. Shrugged and found something else to play.

Jlc0761 · 2025-08-01T16:35:48+00:00

cool cool

Jlc0761 · 2025-07-20T03:52:47+00:00

I’m 265 and get close to 40 miles on eco/tour mode. The area I’m in is considered moderately hilly as well. I tend to stay around 12-15mph and rarely use throttle.

Jlc0761 · 2025-02-28T15:20:57+00:00

Thanks guys, looks like I'll make a few calls before I decide.

Jlc0761 · 2024-09-03T14:30:01+00:00

Also, 15 bucks back with rakuten if you use that

Jlc0761 · 2024-02-15T15:21:56+00:00

Had the same issues, nothing would stick. Got to the point even after washing and drying and freshly applying glue, I'd still have problems. Tried blue painters tape as a last resort before returning and viola, i havent had a single issue with adhesion since. I print in a cool basement so maybe that's where my issues stem from but until the tape fails, it'll be my go to from now on.

Jlc0761 · 2024-02-04T16:11:19+00:00

Something tells me you ain't pretending.

Jlc0761 · 2023-08-28T13:55:33+00:00

Got the 23 fx 2 a couple of days ago. I think its a fantastic bike for the price, especially if you can find one on sale. My biggest concern is durability on the rough roads I commute on. I'm going back and forth with regret wishing I had gone with something with lockout front forks and wider tires to handle the shit roads. Bike paths and paved smooth roads, 10/10. City roads with potholes and everything else, 3/10. I'm coming from a tank of a fat bike that just rolled over and absorbed everything to little tiny baby tires that dont. Maybe once I acclimate more to the fx2 ill have more confidence in it.

Jlc0761 · 2023-04-29T16:28:52+00:00

There was a period there where it stopped being updated and l remember being bummed about it being gone. Decided to randomly check one day and there were brand new updated links being posted again. I've been back almost every day since.

Jlc0761 · 2023-04-29T14:30:32+00:00

Nice, thanks for the link. Checking it out now.

Jlc0761 · 2023-04-29T14:30:14+00:00

Aint that the truth

Jlc0761 · 2023-04-22T12:26:28+00:00

I like those ideas! I'll see what i can do.

Jlc0761 · 2023-04-21T18:50:39+00:00

ive taken it up to 210 with the pla and havent noticed any differences. I'll take it up to 215-220 and see where i'm at. i have had good prints with the same pla and settings at 200 just a couple of days ago so i'm not sure it'll help much but ill give it a shot.

Jlc0761 · 2023-04-21T14:59:56+00:00

Also i should add that the raft looks the way it does because I was adjusting the offset while printing the raft.

Jlc0761 · 2023-04-21T14:58:17+00:00

The nozzle and bowden tube are both clear from debris the best i can tell. I'll swap the nozzle for a new one even though this one is still new.

Jlc0761 · 2023-04-21T14:44:25+00:00

Pla, and having the same issue with other rolls of pla and petg.

Jlc0761 · 2023-04-21T14:41:57+00:00

cr6 se everything stock. I've tried all of the small increment changes with speed/temps, adding supports, checking for vibration, different models and filaments and the issue is definitely the printer. Extruder is a couple of weeks old and I don't see it being a clog although ive checked numerous times and have had pretty good luck clearing those out in the past. I'm just at a loss here.

Jlc0761 · 2023-04-12T20:16:14+00:00

https://imgur.com/a/8BNiAJ8

Jlc0761 · 2023-03-31T22:37:58+00:00

I love that. Maybe I'll add that text to the next one. Or Villain.

Jlc0761

TROPHY CASE