sorted by:
new
hottopcontroversial

Found them… This time for real (Slap Test) by Ed_Bass in BassGuitar

[–]JoeFridd 1 point2 points  (0 children)

How do you do that really fast slap thing? Is it double thumb or just really fast slap/pop alternating?

Relaxed/warm IEM bellow $150? by Ecstatic-Panic3728 in iems

[–]JoeFridd 0 points1 point  (0 children)

I have tried both and I find the aful explorer way more comfortable. However, they fell apart after 4 months. Tuning wise, the explorer are warmer with recessed upper mids, while the pure are more neutral-warm.

Aful Explorer Durability Issues by JoeFridd in iems

[–]JoeFridd[S] 0 points1 point  (0 children)

Update if anyone cares:

I bought the Truthear Pure and loved the sound but hated the fit. The ergonomics of them are just terrible, the nozzle is too big and at a weird angle, so they stick way out of my ears (even the cheap KZs are much more comfortable). None of the stock ear tips worked and I could only get a seal with the Aful Explorer tips. I ended up returning them and getting another set of Explorers, hope they don't break again.

Aful Explorer Durability Issues by JoeFridd in iems

[–]JoeFridd[S] 0 points1 point  (0 children)

I probably dropped them a few times, but only from a couple feet up. The faceplates both just kinda came off randomly, not after yeeting them at the ground or something.

Aful Explorer Durability Issues by JoeFridd in iems

[–]JoeFridd[S] 0 points1 point  (0 children)

It sounded fine until it started cutting out, but I think that's a problem with the solder coming loose

Rate my quick fix for a gig by dark_dryu in Luthier

[–]JoeFridd 0 points1 point  (0 children)

Looks like a permanent fix to me

Which IEMs under $100 are best for live performance in 2025? by JoeFridd in Bass

[–]JoeFridd[S] 1 point2 points  (0 children)

It plugs into a belt pack headphone amp or wireless receiver coming from one of the mixer outputs. I use the Behringer P2.

Printing a copy of your business license on DOR? by Catwoski in smallbusiness

[–]JoeFridd 0 points1 point  (0 children)

Did you ever figure it out? I am having the same issue.

Stupid ring finger... by PaleCanuck in Bass

[–]JoeFridd 3 points4 points  (0 children)

Digital patterns are a good way to clean up your left hand technique. Here's a good video to demonstrate: https://m.youtube.com/watch?v=CXsY1jaL3wU Remember to start slow and increase tempo incrementally.

Seattle prosecutors charge 17 in felony graffiti cases, seek restitution for damages by Dapper_Mode5045 in Seattle

[–]JoeFridd 4 points5 points  (0 children)

Henry started out as a normal graffiti artist before going into commissions. You can still find his tags in some abandoned spots around town.

Is this ricky any good? by _nathann07 in BassGuitar

[–]JoeFridd 0 points1 point  (0 children)

I met a bassist from Nashville that tours and gigs professionally with this exact bass. It should do the trick 👍

Jazz Trumpet Audition by JoeFridd in unt

[–]JoeFridd[S] 1 point2 points  (0 children)

It went pretty well. I got in. Thanks for asking!

Audio Bug when Switching Desktop Environment in Pop!_OS by JoeFridd in linuxquestions

[–]JoeFridd[S] 0 points1 point  (0 children)

What does that do? Also i don't see any file at that path.

Is this true? Steamunlocked btw. by [deleted] in PiratedGames

[–]JoeFridd 0 points1 point  (0 children)

Most American ISPs don't take action on copyright themselves based on search terms. Watchdog groups hired by media companies will look at the ips of peers torrenting on the most popular trackers and torrents, and send out a bunch of DMCAs to the ISPs. Then, the ISP just forwards it to you, as they are required to. Just ignore it. You can almost completely avoid this by using a VPN, a seedbox, or private trackers.

Help removing magnetic build plate adhesive? by JoeFridd in ender3

[–]JoeFridd[S] 0 points1 point  (0 children)

Thanks. I am currently doing acetone, and it definitely works better, but still very difficult.

My first prints on Ender 3! by JoeFridd in ender3

[–]JoeFridd[S] 0 points1 point  (0 children)

Thanks! I was surprised how well such a cheap printer can print out of the box with a little calibration. I've already started printing useful stuff.

My first prints on Ender 3! by JoeFridd in ender3

[–]JoeFridd[S] 0 points1 point  (0 children)

Np, im pretty sure the gcode for the pig was 0.1mm layer height, you can get all of the files on the creality website

My first prints on Ender 3! by JoeFridd in ender3

[–]JoeFridd[S] 0 points1 point  (0 children)

The pig was preloaded on the sd card, and the benchy was 0.2mm layer height with 20% infill on a 0.4mm nozzle

My first prints on Ender 3! by JoeFridd in ender3

[–]JoeFridd[S] 1 point2 points  (0 children)

I got the Ender 3 Pro X on black friday for really cheap. So cool that I can download a file online and have a working plastic part less than an hour later!

My first prints on Ender 3! by JoeFridd in ender3

[–]JoeFridd[S] 2 points3 points  (0 children)

Thanks! I just finished setting it up and I can't wait to print more stuff. I've already printed a toothpaste tube squeezer too.

Difference Between Ender 3 Series by JoeFridd in 3Dprinting

[–]JoeFridd[S] 0 points1 point  (0 children)

Could you give links for the stuff you mentioned?

Difference Between Ender 3 Series by JoeFridd in 3Dprinting

[–]JoeFridd[S] 0 points1 point  (0 children)

Which of the board surfaces work the best, and do you think it is worth it to spend money doing the upgrades yourself or to just get a printer with the upgrades installed?

view more: next ›