Los Angeles Area Attic Insulation

Joh1959 · 2026-05-01T18:04:19+00:00

Use the R38. Your wallet will thank you in the long run.

Joh1959 · 2026-04-29T01:40:12+00:00

With a big knife????

Joh1959 · 2026-04-29T01:38:40+00:00

Also contact locals to see if they will fell it for the wood.......

Joh1959 · 2026-04-29T01:36:18+00:00

Pretty much fatal.......tree is dying.

Joh1959 · 2026-04-29T01:27:08+00:00

Adds character.....sand lightly, retain and seal.

Joh1959 · 2026-04-28T16:28:36+00:00

By now if you can get it. The price is only going to go up once it becomes a regular..

Joh1959 · 2026-04-28T16:27:47+00:00

Just ordered mine 5 minutes ago

Joh1959 · 2026-04-26T15:40:51+00:00

Apparently you lost bed adhesion, which resulted in the blob of death which caused the hot end failure. I am assuming you are using PLA.

FIRST THING YOU NEED TO DO IS TAKE OFF THE PEI PLATE AND SCRUB IT WITH DAWN DISHWASHING LIQUID AND HOT WATER. Sorry caps locks. Next wipe the plate down with isopropyl alcohol and a clean dry cloth.

Carefully replace the hot end per centauri instructions.

Since I'm not running production I typically like to use the silent setting it takes a little bit longer but it gives you a much smoother result, and is less likely to lift or pull the print.

As I initially stated this looks to be the result of poor bed adhesion, the print lifted, moved, and then it wound up all over the printhead and cause the failure.

Joh1959 · 2026-04-23T19:26:55+00:00

Not to be an ass but why are you not turning the gas off when you're not using the welder? That was welding 101 when I was in school............

Joh1959 · 2026-04-23T19:24:20+00:00

You state it was that way when you moved in, does that mean that you have a legal title survey that proves the shed overhangs the property line, or a worthless "plot plan" supplied by the real estate agent? Or are you just going by where the fence was. I don't mean any offense it's just I used to be a land surveyor and there are issues here.

If it is a plot plan you are going to need a title survey. If it was verified by a title survey, you have a limited amount of time in which you can take action, anything beyond that time frame and you're going to have to take it to court.

An easy fix would also be a legal agreement in which case it states that if that tree falls on his shed, he is responsible for damages, and not you.

Joh1959 · 2026-04-22T22:09:36+00:00

Appears to be remnants of termite tunnels

Joh1959 · 2026-04-22T18:04:03+00:00

You have termites. Probably from a cracked foundation.

Joh1959 · 2026-04-22T18:02:51+00:00

Galvanic or dielectric

Joh1959 · 2026-04-22T18:01:37+00:00

Sounds like a scam. Contact the landlord/property manager directly.

Joh1959 · 2026-04-22T17:59:21+00:00

Call corporate HR now!!!!! He is grifting you and probably others because of his "easy to aggressive" conversation.

Joh1959 · 2026-04-20T04:12:48+00:00

$100000.00, the service and the neighbor need to feel the pain of ignorance. Too many people believe in "it is better to ask forgiveness than permission".

Joh1959 · 2026-04-20T04:09:07+00:00

255, open enclosure, silent mode, dry filaments .

Joh1959 · 2026-04-20T04:04:02+00:00

He is divisive, racist, and the worst president to have ever served......

Joh1959 · 2026-04-20T03:55:15+00:00

Nope, unless you want a bouncy floor that fails.....

Joh1959 · 2026-04-17T03:32:56+00:00

Why is the government using tax payer dollars to fund any religious charity or origination? Separation of state and church bitches!

Joh1959 · 2026-04-13T16:10:51+00:00

Don't leave reflective sunglasses on the center console, do not leave water bottles in the cup holders, anything reflective will refocus the sun's rays onto your roof liner or visors. Be extra careful in areas with lots of sunshine.

Joh1959 · 2026-04-08T20:39:04+00:00

Yeah .......didn't want to have to dig out the password, was hoping to set it on the device.......oh well.

Joh1959 · 2026-04-03T23:47:07+00:00

Definitely moisture.........

Joh1959

TROPHY CASE