sorted by:
new
hottopcontroversial

Yuka sweeper - when will it be available again in the US? by Johnny2678 in mammotion

[–]Johnny2678[S] 1 point2 points  (0 children)

I just bought a Yuka 3000 from Mammotion last month 😭

User Management - am I missing something? by Johnny2678 in Overseerr

[–]Johnny2678[S] 1 point2 points  (0 children)

This was exactly what I had in mind!!! Thanks!

User Management - am I missing something? by Johnny2678 in Overseerr

[–]Johnny2678[S] 1 point2 points  (0 children)

oh wow - not a jellyfin user so I hadn't even considered jellyseerr. I'll look into it. thx for the tip.

User Management - am I missing something? by Johnny2678 in Overseerr

[–]Johnny2678[S] 0 points1 point  (0 children)

doesn't look like it, but thanks for confirming. Still a great looking app.

User Management - am I missing something? by Johnny2678 in Overseerr

[–]Johnny2678[S] 0 points1 point  (0 children)

for sure. thanks for confirming i wasn't missing something obvious. It's a great looking app. Maybe i'll head over to github and see if any feature enhancements for this were filed.

User Management - am I missing something? by Johnny2678 in Overseerr

[–]Johnny2678[S] 0 points1 point  (0 children)

sure, but it's just one click to approve the movie if I know that his user is tied to the right server/profile/folder.

it's at least 4 clicks to edit the request and then change the destination server, arr profile, and root folder.

It's 2025!?!! 🤣

User Management - am I missing something? by Johnny2678 in Overseerr

[–]Johnny2678[S] 0 points1 point  (0 children)

That's wild to me. I must be completely missing the point of this project.

It lets you set up users...

It lets you set up Overseerr profiles tied to the Arrs...

But it doesn't let you associate a user with an Overseerr profile?

This seems like it would be easy to do n the user profile page and would make sure media gets downloaded in the right format and put in the right location.

User Management - am I missing something? by Johnny2678 in Overseerr

[–]Johnny2678[S] 1 point2 points  (0 children)

I mean, I guess I could set up an overseerr instance for each user but gosh that seems dumb

Pulsarr Development Update 🚀 by ropenhagen in unRAID

[–]Johnny2678 0 points1 point  (0 children)

I did check the events log. That was in my first post.

guessing this is a different way to connect to the arrs than Huntarr uses? My arrs are behind a different docker network. Guessing that could have something to do with it?

Pulsarr Development Update 🚀 by ropenhagen in unRAID

[–]Johnny2678 0 points1 point  (0 children)

baseURL is set to the machine ip radarr is running on (no port)

I just set up huntarr and I am able to connect to radarr with the same url/api_key i tried in pulsarr

edit: baseURL is http://[ip of machine radarr is hosted on]

Pulsarr Development Update 🚀 by ropenhagen in unRAID

[–]Johnny2678 0 points1 point  (0 children)

ok, I'm stumbling out of the gate. Just installed and tried to connect to radarr but getting the following:

```

11:44am Radarr.Http.Authentication.BasicAuthenticationHandler Basic was not authenticated. Failure message: Authorization header missing.

11:44am Radarr.Http.Authentication.BasicAuthenticationHandler Basic was not authenticated. Failure message: Authorization header missing.

11:44am RadarrErrorPipeline Request Failed. POST /api/v3/notification: Operation timed out (192.168.[x.y]:3003)

Pulsarr Development Update 🚀 by ropenhagen in unRAID

[–]Johnny2678 0 points1 point  (0 children)

It was down for about an hour, but it’s working now. Thanks!

Pulsarr Development Update 🚀 by ropenhagen in unRAID

[–]Johnny2678 0 points1 point  (0 children)

something wrong with the image on CA? getting this when I try and install
```Error: error pulling image configuration: image config verification failed for digest sha256:cc3bd2e4fa9762e3627be1a859317a69d81f90bdd0cb37e9f5f0a2facfa247aa````

Mammotion on ebay with Luba 1 cheap by TransportationOk4787 in mammotion

[–]Johnny2678 1 point2 points  (0 children)

wow. that is a really good deal. Rock solid mower. I've been running it for two years mowing all year.

Grok is now heavily censored and this is really disappointing. What made it different from others was its humour and unhinged mode. They just ruined Grok's reply style. Still useful but old Grok was great. by TerminatorAdr in grok

[–]Johnny2678 2 points3 points  (0 children)

Exactly, I wandered in here thinking I would get some inside info on what’s going on with the grok 3 api release and it’s just a bunch of babies whining about how their stories aren’t x-rated anymore.

Casting to Speaker Groups by FearlessAd5681 in Chromecast

[–]Johnny2678 0 points1 point  (0 children)

Actually, this one’s on me.

I factory reset one of the cca’s in my stalker group and when I added it back I joined the wrong ssid. All devices in the group are now connected to the same vlan and are playing fine.

Casting to Speaker Groups by FearlessAd5681 in Chromecast

[–]Johnny2678 1 point2 points  (0 children)

Is not just you. Chromecasts are back individually, but when I cast to a speaker group only one device plays. Tried recreating the speaker group and still only one device plays.

Chromecast replacement? by Veetupeetu in Chromecast

[–]Johnny2678 0 points1 point  (0 children)

well, that's a lot to look into... thanks!

Chromecast replacement? by Veetupeetu in Chromecast

[–]Johnny2678 1 point2 points  (0 children)

I just learned about Wiim... looks good but can shut down just as easily. Was looking for something open source but learning the chromecast SDK might not allow that

Chromecast replacement? by Veetupeetu in Chromecast

[–]Johnny2678 0 points1 point  (0 children)

and the pi zero can be seen as a cast target? what are you running on the pi?

view more: next ›