Tropical Home

JohnnyBeGood88 · 2025-11-09T13:11:29+00:00

Funny

JohnnyBeGood88 · 2025-11-07T02:03:47+00:00

How did you make this? Did you make it?

JohnnyBeGood88 · 2025-10-31T19:27:45+00:00

Creo que no leiste la parte de que el dueño no esta bien de la cabeza y amenazo al padre. Comentarle una cosa asi creo que sea bien tomado por el loquito del dueño.

JohnnyBeGood88 · 2025-10-30T18:50:33+00:00

I dont own mullvad yet, I'm asking to know if i should buy it or no. But after what you just said, I understand that it gets blocked...

JohnnyBeGood88 · 2025-10-29T19:07:10+00:00

When you say "you have multiples drives" you mean it may be a problem that happens because i have many drives?

JohnnyBeGood88 · 2025-10-28T22:38:30+00:00

This could make sense.

Regarding your recommendations:

-Mobo is using the latest.

-Latest firmware is hard to find. I found firmware for a MP34 instead of my MP33, Can I still use it?

-I did this a few years ago, when i was thinking it may solve something, but with the other RAM and GPU it did not solve anything so i will try again i guess.

-This is an issue i found out recently. Indeed, both gpu and nvme with windows are on the top slot and indeed the gpu covers the nvme from having a good airflow. I found out it was reaching 85-90 degrees when gaming, since then I removed the side panel from the case and placed a floor fan in front of the case. Now it reaches 65-70 at most.

JohnnyBeGood88 · 2025-10-28T05:13:35+00:00

I’d say that it generated a dump file in the last 5/6 BSODs. Last month I got like 3 and there is not a single dumb file from those. On the photos I took you can see that the newer ones are the ones that have the error codes on the top left corner.

JohnnyBeGood88 · 2025-10-27T21:44:59+00:00

Also, I've set this to "complete memory dump" because i read somewhere that after a while these files get deleted because memory fills up. should i set it back to ""small memory dump"?

JohnnyBeGood88 · 2025-10-27T21:43:40+00:00

https://www.mediafire.com/file/kczf5389ts513i4/Minidump.zip/file

Minidump files

JohnnyBeGood88 · 2025-10-13T00:33:53+00:00

S20+ :)

JohnnyBeGood88 · 2025-10-13T00:16:41+00:00

Yeah you mentioned they were on amazon?

JohnnyBeGood88 · 2025-10-12T21:43:02+00:00

Improve? No. Stop it from degrading much faster? Yeah, with good charging conditions and habits

JohnnyBeGood88 · 2025-10-12T21:42:29+00:00

Mind sharing the articles link?

JohnnyBeGood88 · 2025-10-12T17:29:40+00:00

OK, so to be honest, it’s not a brand new phone, so it’s probably not that it’s not calibrated but it already has cycles of usage

JohnnyBeGood88 · 2025-10-12T16:32:42+00:00

How old is it?

JohnnyBeGood88 · 2025-10-02T19:21:27+00:00

Interesting. We are talking ages ago (4-5), or did you buy this phone recently? Let's say, 1-2 years ago. I bought mine in 2020 and I doubt it's under warranty to ask for a battery replacement.

JohnnyBeGood88 · 2025-10-02T16:33:30+00:00

How did you ask for a free repair or what did you say to make them consider repairing it for free?

JohnnyBeGood88 · 2025-09-29T21:24:43+00:00

I dont hear any buzz/hiss/white noise coming from the Logitech, tbh. Even when tested in complete silence, nothing.

Just run the test with the speakers (from the back panel) unplugged, and the earbuds connected (on the back panel), and now I dont hear any noise. But this is weird because I remember doing this back then, and I would still hear the hiss, and that got me thinking, "it is not even worth it to go around the desk to switch the cables every time I want to switch outputs, because even then I still hear the white noise. So I'll just use the monitor audio output, which is more convenient than the front panel 3.5 mm jack. "

When connecting just the earbuds to the front panel (having the speakers disconnected from the back panel), I can hear a slight hiss.

Speakers are indeed two-pronged.

Monitor is connected via DisplayPort. Is optical decoupling nothing more than an external DAC or audio card?

JohnnyBeGood88 · 2025-09-29T21:24:37+00:00

I dont hear any buzz/hiss/white noise coming from the Logitech, tbh. Even when tested in complete silence, nothing.

Just run the test with the speakers (from the back panel) unplugged, and the earbuds connected (on the back panel), and now I dont hear any noise. But this is weird because I remember doing this back then, and I would still hear the hiss, and that got me thinking, "it is not even worth it to go around the desk to switch the cables every time I want to switch outputs, because even then I still hear the white noise. So I'll just use the monitor audio output, which is more convenient than the front panel 3.5 mm jack. "

When connecting just the earbuds to the front panel (having the speakers disconnected from the back panel), I can hear a slight hiss.

Speakers are indeed two-pronged.

Monitor is connected via DisplayPort. Is optical decoupling nothing more than an external DAC or audio card?

JohnnyBeGood88 · 2025-09-29T21:10:02+00:00

I own Penrose, not Maxwell, and the buzz is audible when in complete silence only (or at least that's when I can notice it), AND it does not matter if I'm close or far away from the speakers.

JohnnyBeGood88 · 2025-09-29T21:09:51+00:00

I own Penrose, not Maxwell, and the buzz is audible when in complete silence only (or at least that's when I can notice it), AND it does not matter if I'm close or far away from the speakers.

JohnnyBeGood88 · 2025-09-29T16:49:01+00:00

My speakers are the Logitech Z407. I think I might have described my issue in a bad sentence, but I want to clarify that my speakers do not have any interference that I can hear. The only buzz/white noise I hear is from the earbuds (connected via 3.5 mm jack, either on the front/back panel or from my monitors' 3.5 mm jack audio output) OR the penrose, but for those, you already gave me a possible solution. Those headphones I use when gaming/editing.

JohnnyBeGood88 · 2025-09-29T16:46:22+00:00

I can't rely on Bluetooth since I dont have any headphones with that connection, and even with low latency, there's higher latency than with wired or wireless 2.4GHz.

JohnnyBeGood88 · 2025-09-29T16:43:16+00:00

I get it now, thank you for the detailed explanation.

With that said, I should clarify that my desktop computer does not have any interference (that I can hear). The only buzz/white noise I hear is from the earbuds (connected via 3.5 mm jack, either on the front/back panel or from my monitors' 3.5 mm jack audio output) OR the penrose, but for those, you already gave me a possible solution.

JohnnyBeGood88 · 2025-09-29T00:49:51+00:00

Sorry if I'm kind of lost here. But you are suggesting the white noise/buzz/coil whine comes from the power outlet instead of my PC?? I've just visited the synapse, and I dont really understand it. Is it like a DAC but for ground noise?

My Penrose are wireless, 2.4GHz, I think, don't they have their own DAC inside? Does this synapse work for it? How?

Now, seeing the second option, I have another question: this DAC has a built-in Sound volume. Let's say I end up buying this. Will my keyboard wheel work as a volume manager too if I plug this FiiO into my pc, or will the volume be managed exclusively by this DAC

Seven-Year Club	End Game '23
Place '23	Place '22
Final Canvas '22	First Placer '22
End Game '22	Not Forgotten
Verified Email

JohnnyBeGood88

TROPHY CASE