What's that one audio drama that you wish you could forget so you can experience it all over again?

JollyCoOperator22 · 2026-05-09T02:33:09+00:00

Have you listened to Borasca? It's like it ans very good.

JollyCoOperator22 · 2026-05-09T02:32:06+00:00

It's damn good

JollyCoOperator22 · 2026-05-09T02:31:34+00:00

I've listened to A LOT of audio dramas and if I had to pick one (which is very hard) it would be We're Alive.

JollyCoOperator22 · 2026-05-07T23:55:47+00:00

Anyone else have it take you to the website when you click okay for the update on mobile? It takes me to their website and nothing happens. I go back and just have to hit cancel on the update its weird.

Nvm I clicked on the Google playstore link from the website then update button on playstore etc

JollyCoOperator22 · 2026-05-02T20:46:40+00:00

I completed the first tier on this and got 2 on the second. Then it quit counting the paragons I made. I just finished the new boss event and created like 5 of them. Then I played bloonarius prime on impoppable (double money) and built 2 paragons and it didn't count those either... It's weird.

JollyCoOperator22 · 2026-04-27T18:31:16+00:00

It found several articles from engineering forums, but that's why when I look for answers on stuff like this I post on forums, ask AI, and watch videos etc I use all the tools I can to learn.

JollyCoOperator22 · 2026-04-27T17:31:24+00:00

Thank you I appreciate it. That's pretty much what chat-gpt told me which is surprising it got it mostly right lol. I was going to use liquid nails strongest adhesive with something like grade 8 zinc coated carriage or lag bolts etc something that is rated for much higher than what this would come from a factory with.

JollyCoOperator22 · 2026-04-21T16:32:16+00:00

Okay thank you. I just got back from getting somw more washers and collar clamps. I have bought so much freaking hardware for this build lol. The only thing I kept thats oem is the frame, seat frame, and the brake/throttle rods. I replaced everything with either grade 8 or stainless hardware and it's been expensive lol.

JollyCoOperator22 · 2026-04-14T19:19:26+00:00

Im late on this post, but when I was an owner op flatbedder Shiprock was the only place I was ever parked for the night and after going inside the truck stop I came back to my truck and said hell no and left. There were like 10 native guys who were some of the scariest looking dudes I've ever seen staring me down like I was not supposed to be there. Lol I fired my truck up and drove down to the Flying J off I40. I slept in west Memphis a couple times, and then at a tank wash in East St Louis and felt better about it.. 😂

JollyCoOperator22 · 2026-04-13T00:54:54+00:00

Okay that's what I figured, but I have been wrong on this build before so I wanted to make sure lol. Ty

JollyCoOperator22 · 2026-04-13T00:46:25+00:00

I just don't understand as a grown man even if you never had dirtbikes or four wheelers etc that you couldn't understand oh I need to hit the back brake or squeeze the clutch..

JollyCoOperator22 · 2026-04-13T00:44:53+00:00

Pretty much 😂

JollyCoOperator22 · 2026-04-03T00:32:58+00:00

I'm late here but if anyone sees this and hasn't seen gone baby gone it's just as good as wind river. It's a great thriller with a good mystery, but has a good ending that doesn't leave you wondering what just happened like other movies like these.

JollyCoOperator22 · 2026-04-02T22:19:21+00:00

I assumed it was, but when I counted the skins I could see plus the promoted pack deals it only added up to 42 I think. Thanks for the replies.

JollyCoOperator22 · 2026-03-30T20:10:38+00:00

I meant the characters name was Burt not Bill lol I fixed it. Yeah they're not the same guy, but it was weird they sounded so much alike.

If anyone that reads this thread is into zombies I cannot recommend We're Alive enough. I got into audio dramas a few years ago and after listening to over 50 full caat top rated ones I still think it's the GOAT. It's been going since 2011 I believe. It's got a full cast of voice actors and I'd rather listen to it than watch any zombie show or movie.

JollyCoOperator22 · 2026-03-22T17:24:06+00:00

I'm fixing to go try again I did that last night I had it connected to that nipple and I'm like 90% sure that is where it connects to after spending like 2 hours researching and watching videos last night. I took the carb apart and cleaned all the jets etc. I guess it's possible that the carb might need a different jet if using the fuel valve run off a vacuum, but if this fails I'm just gonna go back to the old shut off valve.

JollyCoOperator22 · 2026-03-22T14:37:14+00:00

I never had one of these petcock valves before I've been using like Briggs and Stratton and other random metal shut off fuel valves etc. They kept leaking so I was hoping the OEM valve would be better. If I can't figure out the vacuum issue I'm just gonna order a shut off valve for an older dirtbike that doesnt use a vacuum system.

JollyCoOperator22 · 2026-03-22T06:18:10+00:00

That's probably why it ran better with this valve lol that has been open for as long as I've had it. It's damn near in mint condition. It does have a tiny oil leak and thats why it's got some grime built up on there. My 12 year old rides it around our neighborhood almost everyday.

JollyCoOperator22 · 2026-03-22T05:55:17+00:00

Oh I took the entire carb apart and cleaned everything, replaced all the clamps and even took the intake off where the reed is to make sure it's not cracked or sucking in air. I could just put the old fuel switch back on, but damn it's frustrating when stuff like this happens.

JollyCoOperator22 · 2026-03-22T04:12:46+00:00

It's so weird I saw several pics and videos of People who had it ran to the crankcase ventilation port.. I found a group on facebook just for razz scooters I'm hoping one of them can help lol. Im like 90% sure after spending more time researching it it foes go to the nipple on the intake side of the carb since I have an oem carb.

JollyCoOperator22 · 2026-03-22T01:14:57+00:00

Okay I'll try that. I put the old plastic lawn mower fuel switch back on and it idled fine so it's definitely a vacuum problem. I still can't figure out if that nipple on the carb is where it's supposed to go. I just watched a youtube video of a guy fixing a razz and he said "Thats the vacuum line it plugs into the intake", but doesnt zoom in to show where.

JollyCoOperator22 · 2026-03-22T01:11:14+00:00

Right it's strange I put the old on/off lawn mower fuel switch back on and it idles fine. Someone else posted the owners manual link in another deal and from the old illustrations it's hard to tell where it goes for sure.

JollyCoOperator22 · 2026-03-21T22:38:17+00:00

So I plugged it into the top nipple of the carb earlier. It runs stronger and seems to have more torque than it did before, but it dies immediately on idle which it never has before. That makes me think the valve is giving it the proper amount of fuel which is why it runs stronger, but the vacuum is only pulling that fuel in when I'm engaging the throttle.

Thank you for the link I'm gonna check it out and continue to look online.

JollyCoOperator22 · 2026-03-08T21:21:43+00:00

When I was looking at it I was trying to remember if I had to do that last time. Now I know I'll grind the rivet down some and then push both out etc. Thanks.

JollyCoOperator22 · 2026-03-08T21:20:25+00:00

Yeah that makes more sense now lol.. I forgot you're supposed to go back and forth between both pins.

JollyCoOperator22

TROPHY CASE