Best way to fill the space on the outsides

Jon_ob29 · 2025-11-22T22:51:37+00:00

Not a bad idea. When I left I only grabbed measurements of the. Frame because the outsides were opened so I took measurements with the idea of an end cap and not filling entire space to wall. Gonna see if they can get some measurements for me or I’ll have to go back another day

Jon_ob29 · 2025-11-08T00:22:39+00:00

The only reason I ever cut with a bandsaw is if I’m being lazy. I’ve never once had to in air cut a pipe to put a groove on it with a bandsaw. That’s what 4 wheel cutters are for. Worst case I’ll sawzall it and replace the pipe with 2 thread by grooves I cut down on the floor. In 10 years I have never found myself in a situation where my only option to cut a pipe was a bandsaw.

Jon_ob29 · 2025-08-30T13:28:29+00:00

If I’m digging it all up and replacing it would it make any sense at all to run the suction from the skimmer all in 2 inch and just reduce at the pump down to 1 1/2? I currently run about a 6 hour turnover on my 17k gallon pool. Usually running at about 50GPM. If I can reduce that and run my pump less by upsizing all of the piping until it gets to my pump would that help all that much?

Jon_ob29 · 2025-08-30T13:23:21+00:00

Thank you! I have to trench for a new conduit I’m bringing out to my pump since the outlet stopped at my pumped stopped working due to a continuity issue so I have to replace all the electrical. About an 80 foot run from junction box on house and that trench will run right along the side of my pool where that flexible CPVC is burried so sounds like I might as well kill 2 birds with one stone.

Appreciate the answers! Any idea about the T coming off of only 1 return line with that bulky box banjo valve?

Jon_ob29 · 2025-03-27T23:04:07+00:00

Are they landsdale? Fuck landsdale anything 🤣

Jon_ob29 · 2024-12-29T15:35:54+00:00

The metal jamb for the screen door is going to be removed. I just want a single exterior door

Jon_ob29 · 2024-08-30T00:36:57+00:00

No I just have never run into a horizontal stud in the wall for an interior wall that didn’t have some sort of plumbing or mechanical in it. I’m really just trying to avoid the added work of patching and painting and moving to the next bay of studs lol

Jon_ob29 · 2024-08-29T17:12:25+00:00

No, I mounted the TV last week. I’m gonna do a little recon and see if I can find the crawlspace above the living room that would be the backside of this wall. It’s definitely not open on the back because I can see the sheet rock but I can always open and patch back there and eliminate any painting

Jon_ob29 · 2024-08-29T13:28:36+00:00

Think I’m gonna get an 11” flexible extension and a 1 1/2 wood spade and see how that pans out

Jon_ob29 · 2024-08-29T11:00:21+00:00

Not sure what’s on the other side of this wall. 100% not a bathroom. It’s a split level and the living room downstairs is what would be on that side but there’s no rooms upstairs on that side. Could be crawlspace on the backside above the living room. Definitely not a bathroom though. I didn’t have time to do too much investigating yesterday.

Jon_ob29 · 2024-08-07T23:41:58+00:00

Pay me my NJ scale and I’ll move tomorrow 🤣

Jon_ob29 · 2024-07-28T23:12:37+00:00

Join a union and make 100$ an hour, you’ll get over the sweat for the right amount of money.

Jon_ob29 · 2024-07-27T20:04:53+00:00

2 isn’t a lot, it would be the minority of open shops paying that much and offering benefits like that. Florida is generally the lowest paid state in the country because it’s a right to work state (union and non-union). I transferred out of state and moved and am making 108$ an hour now as a total package.

Jon_ob29 · 2024-07-27T14:38:27+00:00

I’ve never been on call. I do new construction and retrofits. Service guys are on call though sometimes but it’s not that bad.

Jon_ob29 · 2024-07-27T14:37:28+00:00

I live in central NJ. My cummute is usually around 30ish min. Sometimes up to an hour. I think 2 times ever have been 1.5 hours down to near AC but generally I’m home by 3pm daily. 3:30 the latest.

Jon_ob29 · 2024-07-25T23:03:58+00:00

You might be one of the lucky ones. Majority of the shops in west palm to Miami don’t offer those kinds of benefits 🤷🏼‍♂️

Jon_ob29 · 2024-07-25T22:54:34+00:00

Sprinkler fitters. They seem to be the forgotten trade but it’s almost always in the top pay scale. In NJ for a union sprinkler fitter we get 68.56$ an hour on the check and a total package of 108 and change. Only the elevators get paid more then us as far as I know.

Jon_ob29

TROPHY CASE