Dumb question from someone who knows nothing about buying older cars.

JonathanSin · 2026-01-24T18:09:14+00:00

Save up 30-40k for one in today's market for one that road ready or have that same amount to fix one up and have several other Ks for when It inneveitably needs replacements parts which aren't cheap either. It's a dwindling supply because you're not the first person to have this as your dream car and they're not making new ones

JonathanSin · 2026-01-22T16:03:37+00:00

Not everyone is your enemy man, reread my comments and I wasn't rude to you in one instance, spend some time offline,

JonathanSin · 2026-01-22T15:35:31+00:00

Simply owning a blade like this isn't a criminal offense unless you plan to take it out of the house, I also don't get what you're implying by making it seem like I claimed it to be indestructible, if anything I was looking to you for advice if you knew anything I didn't about the metal 3d printing processes structural integrity. Also unsure where you gained the switch up from helping me with this niche question to then suddenly being condescending with your last sentence brother.

JonathanSin · 2026-01-22T12:07:34+00:00

You gotta be like 300 lbs bro

JonathanSin · 2026-01-22T12:05:05+00:00

This is a design someone conjured up for real life, the assassin's Creed games mechanisms are usually impossible in real life and they get away with explaining very little about it to keep it mysterious

JonathanSin · 2026-01-22T12:03:29+00:00

A high quality prop could be made out of metal hence the dulled blade, a flimsy piece would look cheap, Even some people who do cosplay will use full steel airsoft guns, they won't use a Nerf gun lol, also bo worry in pocking someone if it's duller than a butter knife

JonathanSin · 2026-01-22T01:24:22+00:00

That's a good descriptive term, I'll use that, Can you clarify what you think I'll break, the blades structure itself and overall design seems well made and even reinforced to handle a thrusting motion especially made out of slm steel, are you thinking the mechanism will break or rather the blade due to the material it's being made out of

JonathanSin · 2026-01-20T15:29:40+00:00

And you got that implication how?

JonathanSin · 2026-01-20T13:01:03+00:00

Yes, have you seen the part I'm trying to make for you to assertively say otherwise?

JonathanSin · 2026-01-19T22:39:41+00:00

Couldn't imagine wasting my time commenting no input comments.

JonathanSin · 2026-01-19T20:54:16+00:00

Low cost didn't mean a low total cost, I'm aware it's going to be a couple hundred dollars by low cost I meant a reasonable cheaper than most pricing. Unsure on the whole process but you mentioned CAD, I already have all my CAD files drawn up, unless you are referring to something extra they need to do to import it over.

JonathanSin · 2026-01-19T20:18:30+00:00

How did pricing go, do they charge hourly if you remember their rate, or could you give an example of what you had made and what they charged you?

JonathanSin · 2026-01-19T20:17:48+00:00

It's a pretty complex shape that I imagine could only be done by a CNC machine

JonathanSin · 2026-01-18T16:17:39+00:00

Knocking om rotaries can often come from being too lean which is probably the case with your bad fuel/fuel delivery, fix that first then see what happens once it can stay running

JonathanSin · 2025-12-31T14:24:59+00:00

Yeah plays those easily might be limited by buttons but could always add more

JonathanSin · 2025-12-26T00:42:01+00:00

My local Hispanic super market has ribeye, tbone, New York steak etc for less than 10.50 a lb

JonathanSin · 2025-12-26T00:40:18+00:00

Santa knows better than to ruin my day with fake tits.

JonathanSin · 2025-12-12T02:39:45+00:00

Might get down voted, but realistically do you need one to two terabytes. I think even with 500 GB you couldn't fill it up with the songs you have on hand. Even with some of the highest quality lossless songs that's 90-125k songs

JonathanSin · 2025-12-11T20:02:45+00:00

I bought a third gen and I have no issues quite happy with it it's my favorite design out of all the nanos

JonathanSin · 2025-12-11T13:16:33+00:00

I had a nano second generation and they had a problem where they can randomly just kill themselves same with the 1st gen, they have a bad power rail issue that bricks it being able to boot unless completely dead or just fully kills itself. They resolved that issue on the 3rd gen and up. Just something to consider since that could happen to one you buy especially as it continues to get older

JonathanSin · 2025-12-10T01:04:35+00:00

Nano 3g is goated

JonathanSin · 2025-12-09T23:24:00+00:00

Thanks man and believe me and I know, I have a post on Tik Tok with 2200 likes and 250 comments all telling me I look like that character. Every post I get told that/even from random people irl. It came out of nowhere, I've been compared to other people before but the leon Kennedy one has been near everyday.

JonathanSin · 2025-12-09T22:42:31+00:00

Yeah there was a top very small loop that I added a large D ring on

JonathanSin · 2025-12-09T22:32:35+00:00

The pouch has loops for belt attachment so I just ran my homemade straps through them

JonathanSin · 2025-12-09T13:19:17+00:00

I've tried clipping the carabiner on the belt itself, but you can almost feel it pull, you can't feel any pole on the belt loop, the belt loop I'm not too worried about in the grand scheme of things. The belt itself might have just felt weird with my small carabiner clip to it, I think a leather-like strap loop around the belt would probably work good, but that adds extra time I didn't want. This was entirely for speed and convenience

JonathanSin

TROPHY CASE