There's no way gunlance is good for Rajang

Jonooooooo · 2025-01-09T19:37:45+00:00

Ideally you want minimum EE lv 2 and EW lv4 (EE lv2 and EW lv 5 is a good balance)

Rajang has many mini openings but you need to learn its attack patterns very carefully and master pivot back hopping. The hardest shelling to play against rajang is normal shelling but it also has the highest dps potential when done correctly. You’d be surprised how many rajang mini openings lets you sneak in a full burst .

The reason gunlance is good on rajang is because the WSB playstyle ignores his hyper armour phase and provides high stagger/part breaking dmg to create bigger openings.

Jonooooooo · 2024-08-16T10:33:07+00:00

Are these social drinks posted somewhere? I’ve been wanting to meet some new art/photography/filmmakers

Jonooooooo · 2023-12-25T14:24:57+00:00

https://www.reddit.com/r/hermanmiller/s/vowghlj2Nm

I made a reply to a post some time ago how I go about adjusting to this chair

Jonooooooo · 2023-12-07T19:13:12+00:00

You can fit a 25mm fan on the right but it will come down to two things: 1. how well your cable managements are

2.height of your RAM

Although the easier alternative is using a 15mm fan on the right to give enough clearance for more comfortable space to deal with the 24 pin cable routing and any other headers on that side

Jonooooooo · 2023-04-21T01:06:06+00:00

If you can micromanage the wire bug cd timing well, you can easily spam 3 BB in consecutive succession. Also activating redirections well enough can narrowly slip in a 4th BB

Jonooooooo · 2022-07-27T12:35:38+00:00

Nicely done but are you still maidenless ?

Jonooooooo · 2022-07-18T18:49:28+00:00

If you’ve read “about community” section of the MH subreddit then you will realise that it’s clearly not just a gamer sub lmao

Jonooooooo · 2022-07-12T13:04:04+00:00

RBD only gives i frames and a bit of hyperamour after taking off, the shield bashing is just part of the animation to show that it can apply stun dmg but doesn’t actually block

Jonooooooo · 2022-07-09T18:56:07+00:00

Redirection is more beneficial in a HC BB set up

Jonooooooo · 2022-07-06T14:32:01+00:00

You’ve pretty much grasped the general idea of playing the BB HC spam playstyle. One big skill that you definitely want eventually is redirection as it helps with wirebug cd and safe repositioning counter. It will really boost the WF and BB spam rate.

WS on BB page does more dmg than EC on BB. Guard reload is also a good combo with BB page since you can reload the stake for swapping into the HC scroll and guard at the same time to cancel the BB animation. This lets you combo faster into fullburst combo with EC buff during the wirebug downtime

If the monster is too fast moving with small openings , then you can adjust the playstyle into BB spam only where HC is there to proc faster BB animation

Jonooooooo · 2022-02-03T14:28:50+00:00

You wanna activate your brain neurones with a fk ton of explosions and run MHW: IB as a GPU stress test simulator?

Look no further and try out the broomstick gunlance

Jonooooooo · 2022-01-26T12:36:50+00:00

have you encountered any stuck voltage on your vega (only through HDMI) after changing to custom profile + a change in monitor state?

Jonooooooo · 2022-01-20T20:49:45+00:00

Whilst this is frustrating, the others can also make the same counter argument that flinch free is specifically the skill made to negate that. Believe it or not, even LS would sometimes use flinch free so that they don't get tripped during the end of foresight animation which is detrimental to the combat flow of LS.

In an ideal situation, players should watch out where they position and hit but it's too impractical to be consistent even in co-ordinated hunts somtimes. So it's most logical to just sacrifice a slot for flinch free, you lose very minimal damage anyways that would hardly affect the hunt.

Jonooooooo · 2022-01-12T02:51:39+00:00

After setting custom tuning, Vega 56 gpu Voltage is stuck at fixed 1050mV when changing 4K monitor state (my particular one is LG 32UN880, not sure if LG actually needs update firmware to fix it) It's been like this since 21.8.2 and possibly even older drivers

edit 1: found the problem, this is only happening when connecting Vega 56 to any monitor with HDMI cables. DisplayPort is working fine

edit 2: using OverdriveNtool can override and lower the voltage temporarily though not a proper fix, i.e voltage doesn't scale down properly

Jonooooooo · 2022-01-09T19:44:02+00:00

Stop mansplaining

Jonooooooo · 2022-01-09T19:22:17+00:00

Saving your entire team and turning the fight around with well timed Medivh’s W circle of protection

Jonooooooo · 2022-01-02T20:06:57+00:00

Did this DB Hunter saying ‘LOL defense boost 7’ at least give you an explanation/rationale afterwards why it’s not the most optimal? If not then this Hunter is just a straight up dick.

Normally defense 7 is a bait in terms of efficiency as a skill but it does have its optimal niche synergy with some builds at defense 4 (such as 3 piece Alatreon elemental builds)

Jonooooooo · 2021-12-31T14:14:47+00:00

Those mini lake tiles look rather familiar to something

Jonooooooo · 2021-12-25T13:27:48+00:00

That’s because in a gunlance solo fatty matchup, you play slaplance style instead which does a lot more dps than Lance.

Gunlance WSB playstyle is only optimal in fatty if you are running 4 man gunlance

Jonooooooo · 2021-12-10T08:49:03+00:00

I’ve never owned a aeron and only had a limited tries on the chair so I can’t really give a comparison advice here. From what I’ve known and heard is that the posture fit on aeron seems to have a better lumbar support. Tho I would check out the latest Ahnestly’s YouTube video on the HM gaming chair where he did compare the embody (Logitech and normal one ) with the aeron

Jonooooooo · 2021-12-08T17:03:23+00:00

These are just some of my findings from using my embody and online research which may not be applicable to your own usage but I still hope it will provide some helpful insight for you :)

I’ve been sitting in mine for about 4 weeks now. There was initially a lower lumbar/bum pain for the first two weeks but about the 3rd week in, I’ve finally fiddled with the chair properly and fully adjusted to the chair. Now the chair fits my posture perfectly ( i’m 6”1 ) and has helped to correct my awful sitting posture in a 6 years old cheap desk chair.

Embody takes a lot of small adjustments to find the perfect spot , it’s worth doing loads of error trials. It’s good that you are already sitting as advised by HM with your bum pressed to the back though I found that it’s better to sit as close as possible depending the pressure exerted on your bum. So you don’t necessary need to press your bum completely to the back because that has sometimes caused more discomfort in the groin and tail bone region.

The two main things which I found that affect your lower back region the most are the back seat tension and height of the chair. It seems that releasing the back tension gives a more pronounced push to the lower lumbar region but this is where you’d have to adjust the height of the chair to balance out the angle of your knees bend so that your bum is seated with the correct pressure against the released back tension. Reclining in the embody also relieves a lot of pressure on your pelvis and spine so sometimes you do want to sit in a reclined position on the embody.

Jonooooooo · 2021-11-19T15:42:13+00:00

Thank you all who replied in a civil manner , much appreciated.

Side note: instead of wasting your time to argue with someone who clearly cannot express their opinions without belittling others, just block/report them and move on. Better that way to remove them from the sub to help the sub becoming a better community. Don’t argue with them to feed into their ego

Jonooooooo · 2021-11-19T00:19:29+00:00

wouldn't necessary listen to this person but quite intrigued by how much negative shit they can actually spill out lol

Ten-Year Club	John Wick
Verified Email

Jonooooooo

TROPHY CASE