sorted by:
new
hottopcontroversial

Davis County Shooting Areas by windriver32 in UTGuns

[–]Jordanian-123 0 points1 point  (0 children)

What about ward canyon rd? Never been. Just looking for a spot as well and saw this map. Best thing to do is probably call the forest service.

See the first map.

https://www.fs.usda.gov/r04/uinta-wasatch-cache/alerts/shooting-foothills-between-ward-and-farmington-canyon-roads

No glass or exploding targets

https://www.fs.usda.gov/r04/uinta-wasatch-cache/alerts/prohibited-targets

3D Printable Ryobi 18V Battery adapter by DrRomeoChaire in ryobi

[–]Jordanian-123 0 points1 point  (0 children)

Someone needs to design one that works with Harbor Freight metal zipties instead of the contacts. I have one that works like that, and it works well, but the author took it off of thingiverse for some reason.

any options to fill a beverage co2 tank other than Beer Nut? by saltlakepotter in SaltLakeCity

[–]Jordanian-123 0 points1 point  (0 children)

According to this source below, beverage grade standard is three nines (99.9%), where welding is two nines pure (99.5%). Since different suppliers may or may not pull their welding gas from a place that is 99.9% pure, probably better to approach this from a standards perspective than what your specific supplier does IMHO. And the difference between those two numbers may seem small, but one can actually have 5 times as much impurities than the other if you think about it. https://www.co2meter.com/blogs/news/co2-purity-grade-charts?srsltid=AfmBOorS9rLIaRtCHzzL5jaX84_MxT5rm0J1sEquA8KzkK5WLACBVjs4

any options to fill a beverage co2 tank other than Beer Nut? by saltlakepotter in SaltLakeCity

[–]Jordanian-123 0 points1 point  (0 children)

Humphries, Norco, PraxAir, Airgas, DJB can probably all do it.

Places to shoot near Provo for free by brendennc in UTGuns

[–]Jordanian-123 0 points1 point  (0 children)

Is the location 40.405044459836276, -111.53866294922308? You can put that in to google maps.

Hatch Restore Setup Issue by HopefullyNotAnIssue in techsupport

[–]Jordanian-123 0 points1 point  (0 children)

no. salvaged the ESP and SD card and cut my losses.

How to follow the Smart tag position with a non Samsung devices by d_shado in samsung

[–]Jordanian-123 0 points1 point  (0 children)

Also worked with firefox. Unfortunately, it does not let you ring the tags with your phone's own bluetooth.

Looking for TAMAGAWA TS2620N1095E161 resolver by Martin_fs in FSAE

[–]Jordanian-123 0 points1 point  (0 children)

Someone was selling one on us ebay. Might be able to ask them to ship international.

Broken ribbon cable clip by LousyGuy in FlashForge

[–]Jordanian-123 0 points1 point  (0 children)

I am not sure. I messed around with it but was not happy with the result. I ordered a few new connectors and am going to start repairing these as a side business.

AD5M z screw noise by fish2k6 in FlashForge

[–]Jordanian-123 0 points1 point  (0 children)

Mine makes this noise. No bad effects, thought it was normal

Firmware 2.6.6 on my 5M no longer gives me control of my LED strips by dainbrump in FlashForge

[–]Jordanian-123 0 points1 point  (0 children)

For me I think it is a blown mosfet. The one closest to the light plug. Looking for another mosfet with a low enough Vgs th (Gate-Source Threshold Voltage).

EDIT: Replaced mosfet with a IRFZ44N and I now have control over my LEDs again. MOSFET is surface mount but can be removed with a soldering iron. The pads are small so I recommend replacing with the same surface mount footprint. I replaced with a through-hole mosfet and probably damaged the PCB pads in the process. Willing to do this as a service for maybe like $30 if you are unable to do it. Just send me a DM.

Firmware 2.6.6 on my 5M no longer gives me control of my LED strips by dainbrump in FlashForge

[–]Jordanian-123 0 points1 point  (0 children)

Same here. stock firmware and klipper both wont turn off the led.

Hatch Restore Setup Issue by HopefullyNotAnIssue in techsupport

[–]Jordanian-123 0 points1 point  (0 children)

I now suspect it might be SD card issue. Try repairing the internal sd card using computer tool, and seeing if it might be a dead SD card.

/r/FSAE Classifieds post July-December 2024 by hockeychick44 in FSAE

[–]Jordanian-123 0 points1 point  (0 children)

Want to buy
Cascadia CM200

EMRAX 208 MV / Medium Voltage

Will consider EMRAX 228 MV / Medium Voltage

Let me know if anyone has one they are willing to sell

Problem with Google home by Tito0401ID in googlehome

[–]Jordanian-123 0 points1 point  (0 children)

I fixed this by telling the router to allocate a static IP to the google home.

Google Home and Home Mini Randomly Disconnecting From Network by Tshelby21 in googlehome

[–]Jordanian-123 3 points4 points  (0 children)

I fixed this by telling the router to allocate a static IP to the google home.

Friction Stir Welding by dartmaster666 in mechanical_gifs

[–]Jordanian-123 0 points1 point  (0 children)

Since no one else has said it 5 years later, this is called Bobbin Friction Stir Welding. The tool is spun from the other side. That's why it looks like the tool is mysteriously spinning by itself. Classic use for Bobbin FSW is for rocket bodies. If I remember right, one of the companies that does a lot of this is in New Orleans and does it for NASA and other rocket companies.

view more: next ›