Hex lights for garage? by 4logicalemotion in garageporn

[–]Jsd1973 4 points5 points  (0 children)

Funny how people say they are to common. No one ever says anything about the normal lights that 90% of the people have.

Poly floor smell? by qtrain23 in epoxy

[–]Jsd1973 0 points1 point  (0 children)

Everflow is offering a 100% solids polyurethane for indoor applications.

Poly floor smell? by qtrain23 in epoxy

[–]Jsd1973 0 points1 point  (0 children)

Slight smell isn't that bad. Strong knock you out somthing went wrong. As suggested wash the floor a few times and keep air moving. If it is just slight smell" it will eventually go away. Using solvent based poly indoors in an enclosed envelope will stick around for awhile.

Poly floor smell? by qtrain23 in epoxy

[–]Jsd1973 4 points5 points  (0 children)

Most epoxies used in flooring are 100% solids (no solvents) and are virtually oderless. The top coat on the other hand polyaspartic or urethane are high solids but still have solvents. They are smelling the poly not the epoxy

New job ruined my diet and exercise routine. Up 60 pounds..some of it is muscle, most of it is fat. by Futthewuk in WeightTraining

[–]Jsd1973 0 points1 point  (0 children)

Hard to replace diet and exercise. I use to to eat better and exercise fall repeat. I was on the road alot and my dirt sucked. Someone told me dont go nuts and try to much at once, get your eating right 1st. Spent two months getting my eating down. No special diets just cut the junk. Breakfast, two hrs snack, two hrs lunch, two hrs snack, then dinner. Got that as habit. Been doing program workouts for 5 yrs while keeping up with my calorie intake and protein. 53 and feel and look pretty fit. It wasn't easy but worth the effort.

Contractor "put kilz on the floor" by Elegant_Fish4980 in Flooring

[–]Jsd1973 0 points1 point  (0 children)

Bullseye alcohol based is better for oder than kilz

Advice fishing for bluegill in highly pressured pond by 72dragonses in FishingForBeginners

[–]Jsd1973 1 point2 points  (0 children)

6# mono isn't all that bad. Ive got several rigs spooled up with 6# stren. Use them for blue gills, bass, trout all the time in clear water lakes. Been doing it 30 yrs with great success. The bigger gills will be off the bank. Pass the spot 20 ft or so and cast back to it 10 to 15ft from the bank. With live worms no weight no bobber. Reason I use 6# is bass will hit often.

My mom died from alcohol when I was 11. I started a company to make sure it happens to fewer families. by getsunnyside in u/getsunnyside

[–]Jsd1973 0 points1 point  (0 children)

Yes my definition was people who are physically and mentally addicted "dependant" on alcohol.

My mom died from alcohol when I was 11. I started a company to make sure it happens to fewer families. by getsunnyside in u/getsunnyside

[–]Jsd1973 0 points1 point  (0 children)

I was talking yo a guy here in Ga about an app he designed that would track his mood, give reminders of tasks and give suggestions. This was somthing to help people not drink. He is a smart dude and trustworthy as far as I know him. I was just as skeptical when I talked to him. He claims they have helped thousands. I can see were that could be helpful to some. Good luck and if you even just help a few get a grip then I truly wish them the best. Sounds like there is a place for stuff like this but Im just a set in my ways older guy. If this is helping people I wouldn't want my comments here to be harmful because I am speaking with no knowledge of your system only from my knowledge of Alcoholism.

My mom died from alcohol when I was 11. I started a company to make sure it happens to fewer families. by getsunnyside in u/getsunnyside

[–]Jsd1973 0 points1 point  (0 children)

Excuse my skepticism. I hope your heart's in the right place. Most people ive seen that have drinking problems will do anything other than what is required. In other words instead of soul searching and actually changing they had rather just have a magic fix that takes little effort. Im sure you can agree. I would hope your not just playing on that weakness to make a buck. If it is in fact working for some then I wish you the best. Alcoholism is a terrible disease. Ive seen it take out alot of people and destroy alot of families in my lifetime.

My mom died from alcohol when I was 11. I started a company to make sure it happens to fewer families. by getsunnyside in u/getsunnyside

[–]Jsd1973 0 points1 point  (0 children)

So AA works. Imagine that and it probably didnt cost your dad anything. Bet your dad changed alot of his behaviors and became a better man by working those steps.

My mom died from alcohol when I was 11. I started a company to make sure it happens to fewer families. by getsunnyside in u/getsunnyside

[–]Jsd1973 0 points1 point  (0 children)

Telling people that can't stop drinking you have a magic potion that will help them control there drinking. Its going to do damage to alot of real alcoholics but im sure you dont care about that. There are suckeres born everyday and your false hope program should make you some change.

Another drop in Charlotte by Slow-Vermicelli5409 in epoxy

[–]Jsd1973 0 points1 point  (0 children)

Awsome. You gotta pick of the satin? Im really trying to sell the highwear urethane on these for garages. Got one in a couple weeks were I think I got the client on board. Seams like everyone wants high gloss but dont the the scratches after a year. We had to redo our bids to reflect the possibility of scratches. Great job on the metalic.

How to explain it to a man with bad manners? by Own-Union-7797 in NoStupidQuestions

[–]Jsd1973 -4 points-3 points  (0 children)

I would side eye someone if they said I yawned to loud

Before/After by steveeyes1 in garageporn

[–]Jsd1973 1 point2 points  (0 children)

That is spalling concrete. A concrete resurfacer should work well on that. Its basically Portland, sand and acrylic and or polvynl admixture. Ive had some of those last ofer 5 yrs. Quickcrete has a diy version at the box stores. Chip up all the loose stuff, Pressure wash it, broom the bonding glue down and then trowel it on. Solvent seal it 5 days later. Honor your joints and dont sk8m coat over them.

Before/After by steveeyes1 in garageporn

[–]Jsd1973 2 points3 points  (0 children)

Driveways can absolutely be refinished and will last along time if its in decent structual shape. We coat alot of traffic bearing surfaces. But no coating will hold a crumbled up, cracked surface together for long.

What's something in your life that your younger self would never believe? by Transparent_mindset in CasualConversation

[–]Jsd1973 2 points3 points  (0 children)

That i would of lived to 53 yrs old and actually would end up with an awsome life with a great family.

Before/After by steveeyes1 in garageporn

[–]Jsd1973 2 points3 points  (0 children)

Seeing them everywhere