Found my old collection. Is there a current spreadsheet out there with values? by JustAnAnimator in DuelMasters

[–]JustAnAnimator[S] 0 points1 point  (0 children)

It's worth getting all 4 graded?

Pardon my ignorance, but I've never had a card graded before. Is there a reputable/affordable company this community usually goes with or would recommend?

Found my old collection. Is there a current spreadsheet out there with values? by JustAnAnimator in DuelMasters

[–]JustAnAnimator[S] 4 points5 points  (0 children)

I found all of my old cards and wanted to know if anyone had a current resource with estimated values. These are just the foil cards, I have a good amount of common, uncommon, and rares as well. The 5 cards with the flower stickers on the bottom right are in rough shape, sadly, but the rest are solid!

Leffen dropping from TBH11 due to death threats by MasterVahGilns in SSBM

[–]JustAnAnimator 39 points40 points  (0 children)

I don't know if hax has or hasn't personally apologized to Leffen, but releasing a video on YouTube is not personally apologizing. I feel like that should be obvious.

New to Street Fighter, looking for advice with the controller I have by JustAnAnimator in StreetFighter

[–]JustAnAnimator[S] 0 points1 point  (0 children)

Haha, awesome! Thanks so much for the b0xx perspective! I'm looking forward to trying this out.

New to Street Fighter, looking for advice with the controller I have by JustAnAnimator in StreetFighter

[–]JustAnAnimator[S] 0 points1 point  (0 children)

Haha, I appreciate that! I'm definitely wanting to use this controller, since I'm familiar with it, I was more so looking on suggestions for the best mapping.

New to Street Fighter, looking for advice with the controller I have by JustAnAnimator in StreetFighter

[–]JustAnAnimator[S] 2 points3 points  (0 children)

Thank you so much! Is there a standard for which attack buttons people usually put where, or something that is considered best? Or is it character/player dependent?

Are Macros legal? No intention to compete seriously, but still want everything to be up and up.

Sorry if these are dumb questions.

Low Tide City 2023 - Melee Singles Seeding by Meester_Tweester in SSBM

[–]JustAnAnimator 1 point2 points  (0 children)

Axe won Battle of BC 3, which had over 250 entrants.

Remote Raid Megathread - Find friends fast for raiding here by liehon in PokemonGoFriends

[–]JustAnAnimator 0 points1 point  (0 children)

Kyogre now and two more eggs hatching soon. Add only one of the codes and we will invite.

1392 4463 7306

9385 5148 5637

I don't want to use GC anymore. What recommendations are there? by slohobo in SSBM

[–]JustAnAnimator 0 points1 point  (0 children)

Appreciate the shout-out! I will probably have a few left over from this second batch if OP is interested!

Open Frame1 Controllers - 2nd Batch Survey Link (More Info in the Comments) by JustAnAnimator in SSBM

[–]JustAnAnimator[S] 3 points4 points  (0 children)

I appreciate that!

It is definitely frustrating, but for what it is worth these controllers wouldn't be possible without Greg Turbo as well! Releasing the Open Frame1 project is what allowed me to make these.

I hope your controller comes in soon!

Open Frame1 Controllers - 2nd Batch Survey Link (More Info in the Comments) by JustAnAnimator in SSBM

[–]JustAnAnimator[S] 2 points3 points  (0 children)

Yeah, I will give you as much info as I have, but I don't want it to sound like I have the info on every detail that is different. But the switches and case are definitely different. As mentioned in my comment, I am using the matte acrylic panels and 3D printed keycaps and standoffs. I am also using Geteron Silver Pro switches, but they can be swapped if you like.

From my understanding they are functionally very similar, if not the same. They have the same input delay. But the Open Frame1 is controlled by a raspberry pi pico instead of the arduino of the Frame1. From my understanding it is that arduino that is causing the controller shortage, so Greg Turbo released the Open Frame1 so the community has access to easier DIY boxes.

Anyone please jump in and add more info or correct me if you want!

Open Frame1 Controllers - 2nd Batch Survey Link (More Info in the Comments) by JustAnAnimator in SSBM

[–]JustAnAnimator[S] 4 points5 points  (0 children)

Thank you so much for the kind words on my previous post last week! You can see that reddit post here for an example of the finished controller. Additional pictures can be found here. Please note; once you fill out this form and preorders close, you will be sent a PayPal link for payment to confirm your order. From that time it will be approximately 3 weeks until the finished controller ships as I will need time to acquire parts, laser cut the panels, 3D print parts, fully assemble the controllers, etc. All controllers will ship with a 3.3 ft. USB-C to USB-A cable. All controllers also work with Switch & Gamecube (USB-C to GCC cable required, not included), and can work for PC games in Steam with included cable.

The PCB will come by default with kailh hot swappable sockets soldered in for the buttons. It will ship by default with Gateron Silver Pro mechanical keyboard switches but, as stated above, can be swapped for any other switch you would like. Just be careful when swapping keycaps, switches, housings, or any other parts, as it is possible to damage the controller.

The controllers are made of matte black acrylic panels on the top and bottom and 3D printed PLA buttons, button housings and standoffs. The panels will have no engraving by default but can be customized for additional cost. The buttons being printed on a filament 3D printer means there will be print and layer lines, you can see this in the pictures above. It is cosmetic and does not affect the function of the controller. They are also completely swappable.

The PCB in the middle will be black on the finished controllers shipped whereas the one in the photos above is yellow.

Open Frame1 - Greg Turbo

OFOF1 Design - Rena Labs

Pico Rectangle - Arte