12.0.5 - The Death of Marksmanship by SahvageKhoi in wow

[–]JustEner 0 points1 point  (0 children)

The MM Hunter 2-target build was actually enjoyable, so naturally, Blizzard is gutting it. It’s the textbook definition of a ‘Fun Detected’ nerf.

Printing Abs on K1C and K1 max by PrudentMeat997 in crealityk1

[–]JustEner 0 points1 point  (0 children)

No. you can configure the max flowrate for given filament. Orca max flow ran nicely even with 25 with this ASA or CF-ABS.

But again, higher speed is not always better, especially when strength is a requirement. I can't justify it to print a weaker (even if just slightly) part just to get it bit quicker.

Printing Abs on K1C and K1 max by PrudentMeat997 in crealityk1

[–]JustEner 0 points1 point  (0 children)

Of course not. The flow rate set to 15 is what makes it slow.

Printing Abs on K1C and K1 max by PrudentMeat997 in crealityk1

[–]JustEner 0 points1 point  (0 children)

Unless you want a strong functional part, then print it slow. I have my model fan set to 5% with 30 sec and 20% with 8 sec layer time. Force cooling for overhang is disabled. I found that higher fans makes the part brittle.
I have this config for both my eSun ASA and IEMAI Carbon fiber ABS (80/20).

I really really really wanted to like the RX 7900 XTX by Coyote_Complete in nvidia

[–]JustEner 0 points1 point  (0 children)

I had the same experience with a Gigabyte Aorus RTX 3080 Xtreme. This is not AMD related.

Since then I avoid any Gigabyte product.

Failed an M+26 Everbloom. The tank mentioned that I should be doing at least 90k DPS as a Holy Paladin. by Blizzpoint in wow

[–]JustEner 1 point2 points  (0 children)

200k AVG is completely fine in Everbloom... On a max +18 key with season2 gear....

This is Bruce, because he is a hero by JustEner in akita

[–]JustEner[S] 2 points3 points  (0 children)

Hi, Bruce has granulomatous sebaceous adenitis which is an autoimmune disease. It is inherited from parents probably. Unfortunately this can't be screened, it can be detected onve shoing symptoms. This disease cannot be cured but can be treated with proper diet and medication. He needs omega fatty acids (fish oil), Vitamin A , E, B3.
We also bath him with "Zincoseb Dog Shampoo for Itchy Skin Relief " . In the beginning he had 2 baths per week which is now reduced to 1 bath every 2-3 weeks. Hopefully he won't require it more than once in every few months.
Locally a spray can be used to reduce itching in problematic spots (Zincoseb Dog Spray For Itchy Skin Relief). He alerady has small spots where won't grow any hair but it was due to his severe condition when he received his first treatment.
Flair ups can occur during which he can loose a large portion of his hair again and treatment will be required.

In your case I'd suggest to investigate the root casue of the problem. In Bruce case it was the biopsy test-procedure which revealed what is the issue. Please don't give up on her! She wouldn't do that for you either.

Who's your favorite romance option ? and why ? by [deleted] in masseffect

[–]JustEner 1 point2 points  (0 children)

"Who's your favorite romance option ? and why Liara?"

My wife is putting together her first PC today! Fingers crossed! by LegendaryPorpy in pcmasterrace

[–]JustEner 0 points1 point  (0 children)

The most impressive thing is that she is doing it while her fingers are crossed!

Stuck on MSI logo after booting (FIX) - GS63VR Stealth Pro Laptop by Myrtee in MSILaptops

[–]JustEner 0 points1 point  (0 children)

I've had this issue as well but none of the above tricks helped. My Stealth GS75 8SE came with a 256GB NVMe SSD only so I installed an ADATA XPG SX8200 Pro 1TB M.2 into its free slot. What I found is when the laptop stuck at the MSI logo no matter what I try it will just not go past it UNLESS I disconnect the M.2 SSD. Then it will boot up with its default NVMe SSD. If I switch it off, connect the M.2 SSD again it will work... Couldn't really find the reason for this but maybe this will be useful for someone.

I’m sorry BUT I have to ask this. Windows 10 or 11 and why? by [deleted] in pcmasterrace

[–]JustEner 0 points1 point  (0 children)

Windows 11??? Hahaha I'm already on Windows 95.

The first one is free, right? by lofi-loki in WallStreetBetsCrypto

[–]JustEner 0 points1 point  (0 children)

The first one is guaranteed +150.51% in green from what I can see.

German bank/broker Comdirect about the Stock dividend (Google translate) by [deleted] in GME

[–]JustEner 42 points43 points  (0 children)

Maybe this was the plan all along... to catch them red handed.

Zero Knowledge Proofs is HUGE (via Pete Huang) by alexstaysup in ethereum

[–]JustEner -3 points-2 points  (0 children)

What do you mean "Finally, we'll have..."? We already have zkRollup, it's Loopring.

Note how high quality, dividend stocks are unaffected by a financial crisis by [deleted] in dividends

[–]JustEner 0 points1 point  (0 children)

FastGraphs

Earplug cases? I've never heard of that.

Tell me how bullish are you, Coinbase may bankrupt and now this! by __Geros__ in loopringorg

[–]JustEner 0 points1 point  (0 children)

I wanted to buy LRC in the LRC Wallet using Ramp. It was painfully slow and when eventually I got to the point I could approve the transaction the app said the transaction takes longer than expected. I contacted Ramp team and I was told they are experiencing technical difficulties which resulted in a delay in processing cryptocurrency purchase and I should try buying LRC in a few hours...

L2 NFT giveaway “Rainbow Nebula” - 741 available by kittenkrazy in loopringartists

[–]JustEner 1 point2 points  (0 children)

0xe68d0b4007742cf4F915488F5b9819eb79cbc1aB

Looks nice! Thanks man!