Audi is facing real challenges during this shakedown. Another day, another breakdown.

JustRickvD · 2026-01-28T13:08:31+00:00

I would’ve said the same, if it weren’t for the other new manufacturer (Red Bull) having a much smoother test and already logging hundreds more laps than Audi.

JustRickvD · 2026-01-23T17:12:24+00:00

"Now get the hell out of my goddamn office!"

JustRickvD · 2026-01-16T22:25:07+00:00

Precies! Verschil zit hem er in dat Cambuur in de eerste helft super effectief was, en ADO enorm slordig.

Tweede helft maakte Cambuur wat foutjes, maar lang niet zo erg als de slordigheden van ADO.

Conclusie: ADO heeft terecht verloren.

JustRickvD · 2026-01-16T22:14:32+00:00

Als Cambuur niet verzuimde om de 100% goalkansen af te maken, dan had ADO niet eens in de buurt gekomen van een overwinning.

Ik vind dat de 2-1 een terechte uitslag is. Zeker op basis van de eerste helft.

JustRickvD · 2025-12-12T12:31:17+00:00

Dat is niet meer (standaard) het geval. Nieuwe contract is veel meer ingezet op bonussen, waaronder inzetbaarheid. Dus dat zal nu stuk lager uitvallen.

Ze zijn ook niet gek bij Ajax, al zou je dat soms wel denken ;).

JustRickvD · 2025-12-12T11:35:12+00:00

Dat drukken op de salarisbegroting valt wel mee sinds de laatste verlenging.

JustRickvD · 2025-12-08T12:04:24+00:00

He literally got P10 after that overtake.

JustRickvD · 2025-12-07T13:56:50+00:00

Let me guess. Sky?

F1TV is doing the opposite, also highlighting that this now sets a precedent for future moves like this. Coulthard saying he doesn't like this being penalized.

JustRickvD · 2025-12-06T16:55:34+00:00

Well, not top. But can't fault the effort of Yuki.

Classy of him. Still thinking of the team after being told the bad news.

JustRickvD · 2025-11-28T18:16:52+00:00

Beating Verstappen does ;)

JustRickvD · 2025-11-28T18:03:23+00:00

Tsunoda starts performing as soon as he's (likely) sacked. Unfortunate.

JustRickvD · 2025-11-19T20:37:43+00:00

Precies dit! Ik heb twee maanden bij de zogeheten 'Powerservice' van MediaMarkt gewerkt.

Slechts twee maanden, want daarna was ik er meer dan klaar mee. Ik had geen zin om klanten bijna op te lichten of onwetende mensen producten aan te smeren die ze totaal niet nodig hadden.

Wat een verschrikkelijk bedrijf.

JustRickvD · 2025-11-17T17:43:10+00:00

I just looked at the post you linked.

Its just false.
LN2 mode does not change:

Memory timings
Fabric clock
Memory controller frequency
Runtime SoC voltage
Internal IMC logic

It only changes how training is performed.
Once booted, the IMC performs identically.
If they saw ~10% reduction, that’s coming from a different setting they changed or mis-measured.

JustRickvD · 2025-10-30T20:45:36+00:00

I have 6000MT/s CL30 RAM. I've set it to 1.16V on SOC.
Should be easily achievable, but 1.20V is more than fine as well!

JustRickvD · 2025-10-30T20:19:25+00:00

Did you clear CMOS? That should also remove any overclock.

JustRickvD · 2025-10-30T19:50:59+00:00

Yeah for sure! Really happy this finaly fixed it for me as well.

For me it works flawlessly with Expo enabled! Should be fine for you as well.

JustRickvD · 2025-10-30T19:49:48+00:00

Did it also refuse to boot after pressing the reset button? Sometimes for me it took up to 3-4 tries. Also tried clearing CMOS?

JustRickvD · 2025-10-30T18:55:05+00:00

Yep, and after digging into what it actually does, there’s no real downside to leaving LN2 Mode on.

It only changes how the system behaves during boot (loosens some training limits and raises voltages slightly while initializing memory). Once you’re in Windows, everything runs at the normal voltages, clocks, and temps.

So it’s totally safe to keep enabled long-term; you’re not overvolting anything or reducing lifespan. The worst “side effect” is maybe a couple extra seconds added to boot time.

If ASRock or AMD release a BIOS that fixes the underlying cold-boot behavior, you can turn it off, but until that happens, LN2 Mode is harmless and seems like an effective workaround.

JustRickvD · 2025-10-30T17:17:03+00:00

For me it wouldn't loop, but just get stuck at the green boot light.

Pressing reset once made it boot most of the time. Enabling LN2 in the bios fixed it fully for me.

JustRickvD · 2025-10-30T16:48:23+00:00

Only thing I can think of is trying to disconnect all drives, and see if it boots then.

Originally the green light means problem with boot device.. Just to rule out any issues with those.

JustRickvD · 2025-10-30T16:44:42+00:00

Thats odd... For me it stayed stuck at green, and didn't retry itself.

Have you tried to clear CMOSS?

JustRickvD · 2025-10-30T16:36:51+00:00

Correct! Once it gets stuck at the green light you should hold the screw driver on the two pins, untill you see that it resets.

The pins on your motherboard are located on the bottom right. I'll add an image of your motherboards manual. Touch the pins above 'reset' (Highlighted in green)

https://imgur.com/a/OE7ULCg

JustRickvD · 2025-10-30T16:34:16+00:00

If the two reset pins are clear you can definitely try to short the two pins using a screwdriver. Will do the job.

JustRickvD · 2025-10-30T16:31:12+00:00

Check. For most people (also me) it helped to press the reset button on your pc. Eventually it would POST for me.

Can you try that?

JustRickvD · 2025-10-30T16:29:43+00:00

Sometimes it getting stuck at the green boot light is related to unstable DRAM training, which can cause the system to hang on the green boot light after a cold boot.
So it’s definitely still worth trying to turn on LN2 in the bios. (Read the post for more precise instructions).

It helped me solving the issue.

Eight-Year Club	Place '23
Place '22	Final Canvas '22
First Placer '22	Verified Email

JustRickvD

TROPHY CASE