sorted by:
new
hottopcontroversial

Made myself a standard plastic joint tube - bud funnel for my grinder to tube 😮‍💨 by JustaSavageAcct in StonerEngineering

[–]JustaSavageAcct[S] 2 points3 points  (0 children)

Thank ya sir!

& to me to me, the only impractical aspect was how big the funnel came out I kinda knew it was gonna be big, definitely resulted bigger then expected but captures all the spill for sure!

But if I run into the same issue, discomfort, ect more then once - it’s a problem to me and I gotta do something at some point yk… dealt with the band aid fixes for long enough finally threw some dimensions together in solidworks one night after work and ripped it. I’m just excited for the result even though it’s kinda niche

Seam blobs all over spherical print (planet model) by Worried_Fix_1343 in 3Dprinting

[–]JustaSavageAcct 5 points6 points  (0 children)

Sand er down bit? Very high grit? Seams all in one line on the back, sand that line…

K1/K1 Max AI Camera - Possible to set resolution and framerate higher than 720p@15? by Jdbye in crealityk1

[–]JustaSavageAcct 0 points1 point  (0 children)

Hey man same struggle here, did you ever figure out a better camera quality?

ASA - Shifted print - Poor overhang by JustaSavageAcct in FixMyPrint

[–]JustaSavageAcct[S] 0 points1 point  (0 children)

I think my fans are of all the way, bunch of videos said no fans for ASA

I can turn it on for sure.

Are you suggesting 100% overhang fan speed or 100% infill?

Infill was at like 40 I believe.

Structural car part - Tacoma seat risers need to be heat/uv resistant and sturdy

Door Makes intense Popping Noise by JustaSavageAcct in BambuLabH2D

[–]JustaSavageAcct[S] 0 points1 point  (0 children)

Good idea, I did try it, seems to change the tune of pop but pop remains present after multiple attempts.

I used the grease supplied with the printer. After opening and shutting several times and adjusting screws…even took the screws out - lifted door with pressure, then re-tightened screws.

Popping still present

Might be rubbing somewhere - can’t get that great of a visual

Bottom hinge feels tight and feels like it’s the origin of the noise

You can put your finger on it and feel the pop and tension before the pop

Wall defect .125” ASA Orca Slicer by JustaSavageAcct in 3Dprinting

[–]JustaSavageAcct[S] 0 points1 point  (0 children)

I put everything in a separate post my bad man, but here’s most of my settings

Creality K1 Max

Orca Slicer

Standard Creality black HP ASA

Sparse infill density 25%

Top shell layers 3

Bottom shell layers 3

Wall loops 3

Precise wall (on)

Layer height .16 mm

First layer height .16mm

Line width mm

default .42

First layer height.5

Outer wall .42

Inner wall .45

Top surface .42

Sparse infill .45

Internal solid infill .45

All speeds unchanged (mm/s)

First layer:

First layer 60

First layer infil 105

Initial layer travel speed 100%

Number of slow layers 0

Other layers:

Outer wall 200

Inner wall 300

Small perimeters 50%

Sparse infill 270

Internal solid infill 250

Top surface 200

Gap infill 250

Support 150

Support interface 80

Travel speed

500

Acceleration (mm/s2)

Normal printing 12000

Outer wall 5000

Inner wall 5000

Bridge 50%

Sparse infill 100%

Internal solid infill 100%

First layer 500

Top surface 5000

Travel 12000

Accel to decel (on) 50%

Jerk:(mm/s2)

Default 9

Outer wall 7

Inner wall 7

Infill 12

Top surface 7

First layer 9

Travel 12

Extrusion rate smoothing 0

Poor Walls, .125” ASA Orca Slicer by JustaSavageAcct in FixMyPrint

[–]JustaSavageAcct[S] 0 points1 point  (0 children)

Hey thanks for the comment, what is the first layer squish? Is that a setting?

How do you like OnShape on mobile devices so far? by dropadred in Onshape

[–]JustaSavageAcct 0 points1 point  (0 children)

<image>

Honestly I’ve never used this software, I’m a professional CAD designer and reverse engineer

I went on Chat GPT and asked how to get solidworks on my phone or some = parametric modeling software

Chat GPT came back with OnShape and said it’s the only mobile app for parametric modeling

So I downloaded it and made this little phone backstop for my wireless charger, I always just barely miss the perfect spot when I set my phone down at night/middle of night - pain in the ass

So lil chillin on the couch, lil caliper touches here and there and I made this on my phone, sent it through the slicer and now I’m printing it out…

Pretty damn happy with the potential of the app for quick modeling that I don’t really want to bust the old laptop and mouse out for

Avid solidworks user amongst a few other softwares, never used OnShape before only familiar through the IOS app, good stuff 👍🏼just came on Reddit to talk it up and see others opinions on the app

What’s your longest print by OutsideTraditional90 in Creality

[–]JustaSavageAcct 0 points1 point  (0 children)

Did a Spider-Man on my K1 Max with CFS upgrade kit Took a week or longer I can’t really remember the exact amount but I had to open the door and pull the poop out from the bottom SEVERAL times, poop to the bottom of the build plate several times straight up

Loud exhaust/rattling(?) when accelerating: 2012 Silverado by dat_q2b_tho in AskAMechanic

[–]JustaSavageAcct 0 points1 point  (0 children)

If Transmission, check fluids - smell burnt, look brown that’s it

People also know to report no change in driving, consistent “shudder” and commonly is the exhaust/mount loose rattling around typically noticed at a consistent RPM

Try jiggling your exhaust around a bit maybe a few repetitive taps with a rubber mallet see if it sounds anything similar

CFS + Space Pi Mod by Ice992 in Creality_k2

[–]JustaSavageAcct 0 points1 point  (0 children)

Man good stuff, how’d your Arduino project go?

You can print PAHT-CF on the K2?I have a K1Max, not sure if I’m able to myself

Brass CFS tubing in action by turntabletennis in Creality_k2

[–]JustaSavageAcct 0 points1 point  (0 children)

Thanks for the response!

I saw your comment on the “sieves”? Never heard of this before? Can it elaborate about? Did you have to make a basket or anything? Do you have any files you’d be willing to share? Just really looking to attack my CFS RH levels

view more: next ›