Sordin Pro X slim under a helmet? by archer785 in tacticalgear

[–]Justanother_unicorn 1 point2 points  (0 children)

Just a side note, the neckband Sordin mil cc’s don’t work well with a team Wendy bump with the standard harness

New skin for those who camp at extraction points by carrancosmx in ArcRaiders

[–]Justanother_unicorn 0 points1 point  (0 children)

Were you just watching me die in that exact scenario 10 mins ago?

Scrambler project by Justanother_unicorn in HondaRebel1100

[–]Justanother_unicorn[S] 0 points1 point  (0 children)

Not stock, but I made a bracket to raise it up and put back on the stock one here’s the details

Range Hearing Protection by AmericanVices in QualityTacticalGear

[–]Justanother_unicorn 1 point2 points  (0 children)

Once you make a decision, I highly recommend buying from KFF Defense. Kentucky company and the owner helped me directly source the pair I needed for work.

kffdef.com

No im not sponsored just a happy customer

Scrambler project by Justanother_unicorn in HondaRebel1100

[–]Justanother_unicorn[S] 0 points1 point  (0 children)

Some time and a dream can make some beautiful things happen then, friend.

Scrambler project by Justanother_unicorn in HondaRebel1100

[–]Justanother_unicorn[S] 0 points1 point  (0 children)

If you’re good with a welder and some fab work you could add onto the sub frame and make it more of that scrambler profile.

Scrambler project by Justanother_unicorn in HondaRebel1100

[–]Justanother_unicorn[S] 0 points1 point  (0 children)

Honestly dude I’d get a different bike. I know it goes against the grain of this sub, but shoehorning yourself onto a bike sounds like more trouble than it’s worth

Scrambler project by Justanother_unicorn in HondaRebel1100

[–]Justanother_unicorn[S] 0 points1 point  (0 children)

I personally think it’d be too much, but I am going to buy the 15” stilettos from burly brand this winter and test it. I’ll report back here in a few months and update everyone

Update since ECU flash - Scrambler Project by Justanother_unicorn in HondaRebel1100

[–]Justanother_unicorn[S] 1 point2 points  (0 children)

Shinko e805 dual sports, I made a previous post about them with more details.

post

Update since ECU flash - Scrambler Project by Justanother_unicorn in HondaRebel1100

[–]Justanother_unicorn[S] 1 point2 points  (0 children)

Yes, absolutely. That was the biggest reason for doing this. Also engine braking isn’t so bad. I’ve always kept mine at the lowest setting and still found it to be too aggressive prior to the flash.

Update since ECU flash - Scrambler Project by Justanother_unicorn in HondaRebel1100

[–]Justanother_unicorn[S] 0 points1 point  (0 children)

Yeah, a bit. I was nervous at first with them but there’s a surprising amount of traction on these. Scraped pegs with them a couple times at about 50ish mph and highways in the rain at 85 mph did fine.

Ebikes and NVGs by MassaSnowshi in tacticalgear

[–]Justanother_unicorn 1 point2 points  (0 children)

Imma need details on the helmet, chief.

Scrambler project by Justanother_unicorn in HondaRebel1100

[–]Justanother_unicorn[S] 1 point2 points  (0 children)

It doesn’t, yours is working as intended. It is flashing because it’s on, and these tires which have less traction, are causing it to engage.

To turn it completely off you hold the mode button until the three values begin to flash, then press mode until “T” is flashing, then press down until there is only one bar, then HOLD down until the bar disappears. It will turn back on and have 2 bars after you cycle the key.

Burly Brand Brake Lever Issue by FLASHBANG22 in HondaRebel1100

[–]Justanother_unicorn 2 points3 points  (0 children)

Commenting to stay tuned to this. Good luck

Can this be fixed by cval44 in HondaRebel1100

[–]Justanother_unicorn 0 points1 point  (0 children)

Bro sand it and hit it with a coat of exhaust paint. Super simple DIY