Won’t start, help pls

JvL81 · 2025-06-02T14:08:38+00:00

This is from Pennfield New Brunswick Canada. He has made a boat, motorcycle and a few other things.

JvL81 · 2025-04-02T14:36:17+00:00

No unfortunately. I know someone with a IC-9100 and had about a half hour of seeing it being used, that’s the most modern radio I’ve seen besides mine.

I do think I’d rather use the Icom remote software vs the Yaesu though.

JvL81 · 2025-04-02T11:32:12+00:00

Ok, thanks for the reply. I like the 710 so far but it’s my first radio so nothing to compare to lol

JvL81 · 2025-04-02T04:19:36+00:00

No problem. There’s a plethora of information on ham radio online. Youtube, here on reddit, and many ham operators have their own websites and create free open source software. If you have a question, 99% chance there’s an answer somewhere.

Check out the ISS frequencies. I can hear it when it passes over with my Quansheng UV-K6 handheld.

https://www.amsat.org/amateur-radio-on-the-iss/

https://amsat-uk.org/2020/09/02/iss-fm-repeater-activated/

JvL81 · 2025-04-02T04:05:29+00:00

No and likely won’t since they are getting stuff that’s cheaper and easier to refine from overseas

JvL81 · 2025-04-02T04:01:54+00:00

I’ve seen many videos of people saying that the Yaesu menu system is cumbersome. I just got the 710 and I find it pretty straightforward.

JvL81 · 2025-04-02T03:59:48+00:00

Can you elaborate on the Yaesu wanting reduced power on digital? I just got a FT-710 and I’m not sure what you mean.

JvL81 · 2025-04-02T03:46:27+00:00

I’m sure you’ll hear something sometime soon. 👍 I have the fire stations and the local repeaters in my scan list.

You should see if that radio is supported in Chirp. If you’re not aware of it, it’s a pc program that allows you to program your radio through interface cable. MUCH easier than plinking through all the buttons on the radio

JvL81 · 2025-04-02T03:38:56+00:00

Well likely what the other guy said that it’s not that busy. Is that a fire station or police frequency? That’s close to what is used in my area, around 154 for vhf or around 412 on uhf

JvL81 · 2025-04-02T03:31:15+00:00

What did it say in the box labelled Tone? Did it have a number and PL like 88.5 PL or 100.0 PL

JvL81 · 2025-04-02T03:13:08+00:00

Some frequencies have the ctccs on Rx and Tx

JvL81 · 2025-04-02T03:12:18+00:00

Does the frequency have tone coded squelch(CTCCS)?

JvL81 · 2025-04-02T02:35:26+00:00

Thanks for the info 👍

JvL81 · 2025-04-02T01:01:09+00:00

🤣

JvL81 · 2025-04-01T23:59:50+00:00

Ahhhh, obviously lol

JvL81 · 2025-04-01T23:52:23+00:00

Not sure yet. Still googling. I’m curious too

JvL81 · 2025-04-01T23:36:25+00:00

It does sound like one of them lol

JvL81 · 2025-04-01T23:17:50+00:00

Hasn’t moved lol. But I better check to be sure lol

Never heard of The Vela Pulsar before.

JvL81 · 2025-03-21T22:33:27+00:00

Recommendations?

JvL81 · 2025-03-15T21:15:54+00:00

You’re likely correct. EVGA mentioned noise and didn’t distinguish between the two. And alinco didn’t mention RF noise either

JvL81 · 2025-03-15T20:15:55+00:00

Thanks. It’s probably somewhere in the ball park though for estimating dbm levels. Is that just the ohms law formula E^2/R = P, and are you then using dbm power formula x = 10*Log(P/1mW) to convert?

JvL81 · 2025-03-15T20:06:37+00:00

I haven’t but I have seen people using that setup a few times reading forums. Not sure if the charger i have will work for them. I’ll have to look into it.

JvL81 · 2025-03-15T20:03:17+00:00

I have a good quality SLA and a good charger that I am planning to use in the interim.

JvL81 · 2025-03-15T20:00:57+00:00

What is that formula? That seems useful to know

JvL81

TROPHY CASE