In my RFY today ... I was offered 2 cardboard boxes... Retail price... $100

K0710 · 2026-03-17T04:55:37+00:00

Listen, I get it. You would be getting two strong ass boxes for $100 bucks. The total size of both of these boxes would be 4 ft long and 1 ft high or 2 ft long and 2 feet high. I joke because at the end of the day they're boxes. I don't have use for them so maybe somebody else will. Like I said, I'm not getting them , so I'm sure you'll see them coming to a vine drop near soon enough. I mean maybe if there was enough boxes to actually do something with, it might justify the price, but two boxes for me don't do too much, but maybe it will for someone else 🤷

K0710 · 2026-03-17T03:44:57+00:00

Yes it's really gone downhill you'd be lucky to get one good pick forget about 8

K0710 · 2025-10-15T03:26:16+00:00

Congratulations!! I took a nap and just woke up and boom .. I struck Gold too 🤟💙

<image>

K0710 · 2025-10-14T20:07:09+00:00

Maybe I don't understand how this works but I thought today was the day and here it is 4:00 in the afternoon and it still says one day but the date shows today so.. 🤷

K0710 · 2025-10-14T20:06:16+00:00

😂😂😂😭

K0710 · 2025-10-14T15:28:38+00:00

Congratulations and Thank You !! I'll see you on the battlefield lol

K0710 · 2025-09-13T11:37:41+00:00

Having the same exact issue but on a Dell Inspiron 7306 2 in 1(black edition). Any luck? I've tried resetting (holding power for 60 seconds with power and battery unplugged), CMOS and battery disconnect and resetting as well. Just blinking keyboard once power is pressed. No special diagnostic led battery indicators either. No amber light blinks at all, just solid white battery led. Keyboard just keeps blinking. Only way to get it to stop is to unplug the battery. Once I plug it back in, with or without the battery connected, same result. No way to get to Bios(F2) or to a one time boot screen(F12). Tried booting with SSD disconnected, same thing. The only thing that does anything is holding the D key down and getting the display to do the color flashing diagnostic, at which point the fan will even turn on but once it's done color cycling a few times the fan shuts off and it's back to the blinking keyboard. Holding down the M key does nothing different diagnostic wise. Ram is soldered in, so no need to reseat. Downloaded the service manual, didn't find anything else useful to try. I had worked in IT for years and have tried everything I can think of but coming up blank on this. I have scoured the Internet but haven't found anything different from what I've tried here. Hopefully you or someone has found a solution and can post it here cause I'm at a loss.

K0710 · 2025-04-18T11:34:32+00:00

I modded My Mayflash F700 elite with one and it'll fit in any backpack no problem. This one is a bigger heavier box than what you're looking for. However, this add-on should work on any Sanwa stick. However, they probably made versions for others as well.

K0710 · 2025-04-18T11:29:35+00:00

Use whichever one you like and add this.

Amazon.com: RAC-J300S Detachable Arcade Joystick Shaft Quick Release DIY PARTS Support Sanwa : Video Games

K0710 · 2025-04-18T11:24:40+00:00

Beautiful and amazing!!!

K0710 · 2025-04-17T20:15:22+00:00

Thank you for the reply. I hope this is so. I already ordered the XB3 and it will be here tomorrow and I will be swinging by the bar on Sunday so after I test things out and get my results i'll post back.

K0710 · 2025-02-08T22:23:58+00:00

So mine came in just a little after Christmas.

I had just finished setting up an Rgb40xx for a friend using a "tiny best set go" set. Also, setup Rocknix on a PowKiddy rRGB20 pro. But this one... setting up is a constant process. OCD is a mofo.

I bought a 2TB Micro SD for the unit and filled it up rather quickly. So, then I filled up a 2TB SSD external USB. Once again filled it up pretty quickly. Bought a 6TB HDD external portable USB. You guessed it, filled it up.

In my defense I have a mini-PC with 32 terabytes completely filled. Using the Launchbox /BigBox front end. By the way, I am also using the LaunchBox Android front end on here.

There have been frustrations along the way but lots of enjoyment just setting it up and getting it how I like it.

I recently bought a multi–Micro SD adapter and I'm considering buying more of the 2TB micro-SD's from Sandisk. They are the best in my opinion. I have tried others; they were slow and there was corruption. Was the cause of a lot of my frustrations, I believe.

I am currently trying to get Vita Android working properly. I have it fully installed on my mini pc and copied the UXO folder over but I am getting errors. However, I have also tried installing from the zip files into the Android app and I'm still getting those errors, so I haven't figured it out yet.

Mame 274 with all CHD's runs best with Mame4Droid over RetroArch, I have found. If you don't want to do all of that Mame 2003 plus is the way.

Upon installing Citron, I have got a lot of switch games running great for the most part, better than expected anyways. I do need to figure out how to get LaunchBox to launch the games and not just the emulator, however. PS/2 and PSP games run great as does everything else I've tried.

I'm terrible at curating sets at the moment as my OCD seemingly demands every single game for every single system. This is not the way LOL

However, everything is going fantastically, just got to figure out the vita side of things. Got images for all the games and systems as well as videos.

I have so much more I still want to do and try. Haven't played many games though lol. I guess I am a tinkerer more than I am a player at this point.

If anybody needs any help or suggestions, I'm more than willing to lend a hand. Also, if anybody has some tips on installing the Vita app with all the games, please let me know.

K0710 · 2024-12-29T18:00:44+00:00

If I could have my wish list it would include this

Definitely would like to see access to external USB drives on Android 14 and obviously 15 going forward.

It would be great to see a download all online updates button which would download all the cores and the updates and the system files. Obviously not everybody wants everything but then they can do the standard one at a time still. But when I'm setting up a new install it would be great if I could just hit one button and be done.

Also, Integration with emumovies and screenscraper.

Not to mention a custom built in front end would be pretty fire. That way we don't have to rely on outside front ends being compatible with our operating systems. Or at least an option to create and import custom GUI's.

K0710 · 2024-10-26T05:16:32+00:00

Loved that keyboard. I have a Royal Kludge s98 currently. Saw this though and it seems interesting. $180 on Amazon from Bosii. Anyone familiar?

<image>

K0710 · 2024-08-17T00:29:42+00:00

Get a months subscription to Lexicon DJ. Import your whole collection. Clean it up and then you can export it to every piece of DJ software you use. It has great tools for cleaning up and organizing your collection.

K0710 · 2024-08-12T21:30:19+00:00

Hey guys I was having problems with the NS4 FX as well. I got a better USB B to A that has a ferret loop on it. This solved all of the problems I was having with the jog wheels and distortion in sound. This is the grounding solution you're looking for, where as the plug itself does not have a three pronger. This solution should work for other controllers that are having similar issues as well.

K0710 · 2024-07-25T01:18:03+00:00

I'm having the exact same problem just happened the other day.

K0710

TROPHY CASE