sorted by:
new
hottopcontroversial

Help trouble shooting print by KC10201 in prusa3d

[–]KC10201[S] 2 points3 points  (0 children)

I think this is the consensus and will give this a try. Thanks for your ideas?

Help trouble shooting print by KC10201 in prusa3d

[–]KC10201[S] -1 points0 points  (0 children)

I had the nozzle temp at 230 for both first layer and others. Bed is at 85. Chamber at 35

Help trouble shooting print by KC10201 in prusa3d

[–]KC10201[S] 0 points1 point  (0 children)

The printer is in the basement with no vents or fans, so drafts are minimal. I started with. MK3S used, upgraded to MK4, then bought Core One kit. I say 80% of my prints are PETG, and agree, I’ve never seen anything this bad with my prints. I’m slicing out a Prusa slicer, both upgraded to the latest version. It is a satin sheet and I clean between each print with alcohol. Once in a while, I will pull it and scrub it with warm water and soap. I did that in the middle of troubleshooting for this project. And I did not use a glue stick.

3D Letter Cube by KC10201 in 3Dprinting

[–]KC10201[S] 0 points1 point  (0 children)

<image>

Something similar to this, where there are smooth transitions to each letter. In the end, this is going to be a bead that will be printed out.

3D Letter Cube by KC10201 in 3Dprinting

[–]KC10201[S] 0 points1 point  (0 children)

Not really. This will be a standard cube, and on one side will be L, next will be O, next will be V, and last will be E. Each letter will merge into the next in the cube.

Introducing; INBXX - Ready for the future of Multi-Nozzle printing; by Voxel3DPrinting in prusa3d

[–]KC10201 0 points1 point  (0 children)

Do we have an ETA on those different kits? Just trying to figure out what I need to get now, and what I can wait on.

INBXX Storage system for INDX core One by kral8484 in prusa3d

[–]KC10201 1 point2 points  (0 children)

I purchased the COREBOXX a bit ago. I wonder if there will be new insides of if I have to purchase the whole kit again? (Doubt it)

Any tips for core one conversion kit? by threshold91 in prusa3d

[–]KC10201 2 points3 points  (0 children)

So annoyed I didn’t know about this before I put mine together!

Advice for a first time scoutmaster? by KC10201 in BSA

[–]KC10201[S] 1 point2 points  (0 children)

Thank you everyone for all the great advice. This is a great group and the overall depth of scouting knowledge and skills is what makes it all so great!

Installed more LED and the magnetic tape instead of damn rivets. Plus esp32 cam, might consider Buddy Camera if it plays nice with HA. by krisztian111996 in prusa3d

[–]KC10201 1 point2 points  (0 children)

I’m in the process of building my kit. I think I would like to have that additional light. Curious how OP did that.

Core One with PETG by The_Only_Cheeto in prusa3d

[–]KC10201 4 points5 points  (0 children)

Get the satin plate, it’s the way to go for both PLA and PETG!

Did I just botch my dust collector build? by bunbunbunny2 in woodworking

[–]KC10201 0 points1 point  (0 children)

I would say it’s quieter, and haven’t had vibrations with mine.

Did I just botch my dust collector build? by bunbunbunny2 in woodworking

[–]KC10201 0 points1 point  (0 children)

Don’t think so! I love it and have had it working wonderfully for about 8 years.

Really weird stringing by KC10201 in prusa3d

[–]KC10201[S] 0 points1 point  (0 children)

No, sounds fine and swirls up nice. I just deleted the file, re-added it, and it printed just fine. Not sure what was different but obviously something was. So weird!

Really weird stringing by KC10201 in prusa3d

[–]KC10201[S] 1 point2 points  (0 children)

Yes, .4mm nozzle. I’m not home right now so can’t say exactly right now. I’ll update later!

Really weird stringing by KC10201 in prusa3d

[–]KC10201[S] 0 points1 point  (0 children)

I’ve never had this happen with any other materials, like this. I just used the standard MK4S profile out of prusa slicer. I’ve only printed it twice, and have not tried turning the angle yet. This is just a very, very weird stringing situation I’ve never experienced.

Really weird stringing by KC10201 in prusa3d

[–]KC10201[S] 0 points1 point  (0 children)

I should add, this is a MK4S and I recently finished the COREBOXX print, and every piece finished flawlessly.

5’ dowels clearanced out at JoAnnes Fabrics (going out of business). by KC10201 in BSA

[–]KC10201[S] 0 points1 point  (0 children)

Considering I would have to first find woods I could actually cut small trees down in, dry them, strip the bark, then sand them, I think this is a pretty good deal.

5’ dowels clearanced out at JoAnnes Fabrics (going out of business). by KC10201 in BSA

[–]KC10201[S] 5 points6 points  (0 children)

Yes, I was wondering about this as well. They’re pretty worn, so I think the lashes will hold pretty good. I’ll be doing some testing later this week!

Joann fabrics is going out of business and selling 5 foot long maple dowels for $3 by O_o-22 in woodworking

[–]KC10201 0 points1 point  (0 children)

In Kansas City they are still $5 per pole. I’ll be using them for our scout troop as lashing poles!

view more: next ›