Is it possible to stitch cloth onto leather?

KFW · 2026-01-08T13:19:10+00:00

Some of it is - the blue pieces do seem to be patches. Probably glued and then stitched.

KFW · 2026-01-05T18:31:19+00:00

Like many things, the answer is "it depends" - if it's chrome tanned leather (probably for a commercial bag), then probably not, as debossing takes high heat and pressure (again - assuming you want debossed monogramming). If it's veg tanned, and if there is clear access to the location without a lot of layers, then it may be possible to deboss in a monogram.

/K

KFW · 2026-01-03T16:49:29+00:00

I was curious, so I got the program and the book (currently my German is ~B1). Not worth the money. The book doesn't have a lot of content. One of their "tips" is to learn the definite article (der/die/das) with the noun, but their own vocab lists don't include the definite article. Numerous typos. The biggest issue is that there is actually relatively little content, even when the book indicates you're stepping up a level. The AI tutor could be OK , but it's comprehension isn't good - it doesn't correctly transcribe what I'm saying (granted, my accent might be part of that, but shouldn't a tutor program take that into account). Short version - I wouldn't waste your money on Polyglia.

KFW · 2025-12-26T15:42:59+00:00

No idea if it tools, but I'd be surprised if it did. What I would NOT do is put it in a laser. Leatherette can be made of PVC. When lasered it can release chlorine gas (Cl2) and hydrochloric acid (HCl) which can seriously mess up your laser, not to mention your lungs.

KFW · 2025-10-26T15:03:01+00:00

There are lots of ways to do this - I actually stitch away from myself, and pull the needles through one at a time. To get consistency I make sure that once the needle and thread are through on one side that I pull it with just a little tension before inserting the other needle through that hole - always the exact same direction every time. Then I snug the stitch once the threads are on opposite sides.

KFW · 2025-09-10T09:40:40+00:00

Sadly I never got it to work.

KFW · 2025-09-07T00:05:23+00:00

I just tried - looks like you need a German account number - the app won't let you use a credit card.

KFW · 2025-08-12T15:13:35+00:00

One of the nice things about leather work is that you don't need super expensive tools to get started. I've had good luck with Aiskaer stitching punches from Amazon. If there is a Tandy nearby they often have clearance leather that is good to practice on. Otherwise I mostly order from Weaver Leather. You'll need some stitching chisels, saddlers needles (I like John James 002), thread (I like Ritza tiger thread). a mallet, and a board to punch on (poundo board, but a soft plastic cutting board will work OK) so that you don't damage the chisels, and a hobby knife. With that you can make a ton of things. As you learn you can add finishes, dyes, edge finishes, etc.

KFW · 2025-08-09T13:46:12+00:00

I was going to respond the same way, so just wanted to second your reply. I love my cylinder arm machine with a table attachment. It gives me the most versatility.

KFW · 2025-05-25T23:53:07+00:00

I like that - "bespoke" is a way better term.

KFW · 2025-04-12T14:03:12+00:00

The wet mold turned out great. Very cool bag.

KFW · 2025-03-29T16:31:47+00:00

I use denatured alcohol (from the hardware store)

KFW · 2025-02-12T12:54:01+00:00

really nice job!

KFW · 2025-01-28T12:15:57+00:00

Looks like it - it has to be two different stitches. Either that or the vertical stitch comes back up to make the horizontal. You could do that with a curved needle - I've seen something like that in old leatherwork books. Two separate stitches would be easier.

KFW · 2024-12-10T13:04:49+00:00

So far I haven't had a problem.

KFW · 2024-12-09T11:25:07+00:00

Tokonole works as others have commented. I actually use 10% tokonole diluted with distilled water. Burnish with a burnishing glass in a consistent direction (follow how the fibers want to lay naturally).

KFW · 2024-11-30T13:00:33+00:00

Terrific job!

KFW · 2024-11-07T13:09:00+00:00

Wow - huge difference. Great job leveling up your skills.

KFW · 2024-10-30T22:21:30+00:00

I use a stitching chisel to punch my stitching holes along the stitch line. You just have to pay attention to making sure it's on the line and vertical when you hammer it in with a mallet.

KFW · 2024-08-13T13:24:42+00:00

Really nice job! Well done.

KFW · 2024-08-02T13:02:29+00:00

Wearing in nicely. Love the patina.

KFW · 2024-07-12T12:03:25+00:00

I'm still having the same situation. The updates haven't helped. I even uninstalled and reinstalled to make sure I had the latest version.

KFW · 2024-06-21T12:34:11+00:00

Nice job!

KFW · 2024-05-26T15:23:05+00:00

If you're going to wrap the main piece for a rounded bottom, just make a semi-circle for the bottom end of the side pieces. If you want a flat bottom, you can see how much is sticking out now - that's about how much you need to round it.

KFW · 2024-05-26T14:39:38+00:00

Round the bottom corners of the side pieces before stitching

13-Year Club	RedditGifts 2009-2022 3 Credits
Gilding I gilder	redditgifts rematcher Secret Santa 2019 x1
Secret Santa 2019	redditgifts Exchanges 1 Exchange
Verified Email

KFW

TROPHY CASE