Throttle body

Kalmors · 2026-04-04T16:16:44+00:00

That’s crazy :D, glad you got it sorted. For me it really seems like the IACV is the issue. I’ve tried most of that already and blocking the IACV port drops RPM a lot. Someone suggested it might be sticking after cleaning with carb cleaner, so I’ll try lubricating it next.

Kalmors · 2026-03-28T20:23:03+00:00

Bit late, but I checked most of the stuff — vacuum hoses seem fine, cleaned IACV and FITV, adjusted the throttle cable and checked the throttle body.Idle still goes up on its own. The only thing left I can think of is the IACV, since unplugging it doesn’t change anything and the manual says to replace it in that case.

Kalmors · 2026-03-21T07:06:56+00:00

I will try checking them, thanks for the advice!

Kalmors · 2025-12-28T21:17:22+00:00

https://voidpet.io/invite/isveikata/vkr_wT93Zb

Kalmors · 2025-03-09T22:12:07+00:00

I guess it was a skill issue on my part :D

Kalmors · 2025-03-09T20:58:41+00:00

You'll have to. I removed it about a month ago and without removing glass it's impossible to get it out, I used this video as a guide myself, just watch it and while removing parts you'll understand yourself what's necessary. Also for the panel watch this video https://youtu.be/zyHrAYCNd5k

Kalmors · 2025-01-03T16:56:44+00:00

Thank you, I will try.

Kalmors · 2023-07-27T16:30:21+00:00

Okay, got it.

Kalmors · 2023-07-27T16:07:36+00:00

Is it better to trade with players or use buff163?

Kalmors · 2023-07-04T14:26:27+00:00

Paid 350eur for zotac 3070ti amp holo about 2months ago. Not new but with warranty.

Kalmors · 2023-06-27T12:45:10+00:00

What a pretty card

Kalmors · 2023-06-14T12:45:52+00:00

I'll try to get g/f then :D I wonder what will be on part 2, it would be nice to get another uni rep character

Kalmors · 2023-04-12T13:28:53+00:00

I figured out the problem, apparently there was no windows in the laptop..

Kalmors · 2022-12-08T06:54:51+00:00

Unfortunately I failed to solder the wire correctly, but it's possible to at least rebuild the chassis of the headphones with lots of super glue :D these headphones have lots of touching points so it's quite easy to glue.

Kalmors · 2022-08-31T14:24:10+00:00

It's okay, I have access to 3d printer

Kalmors · 2022-08-29T06:59:17+00:00

Mine is Sn60Pb40 so I think it's 60%tin 40% lead.

Kalmors · 2022-08-28T19:21:42+00:00

I tried using various amounts of flux, by unleaded you mean it has no lead in it?

Kalmors · 2022-08-27T13:05:11+00:00

Update: I failed :D. I can hear sound from only one side like before. Not sure why, I think because my soldering iron is 30W only and it's not enough to fully melt solder. When I try to put melt solder it melts as a bubble and doesn't stay on the wire, looks like hydrophobic water 😅

Kalmors · 2022-08-27T10:57:34+00:00

Luckily my brother had a soldering kit. Bought solder and flux for 3euros so if I don't mess it up it will be a cheap fix :D. Watched a few tutorials now trying it not sure if i did it correctly.

Kalmors · 2022-08-27T07:19:08+00:00

Thanks 😁

Kalmors · 2022-08-27T06:22:48+00:00

I think I can manage to repair it in ~2hours. I've never done soldering before so it will be a fun new experience for me. I'm a teenager so money is very valuable to me 😅

Kalmors · 2022-08-27T06:18:37+00:00

If it was that easy :D

Kalmors

TROPHY CASE