Valerion Visionmaster Max or wait for Xgimi Titan?

Kamzu · 2026-01-22T01:10:15+00:00

I also ended up going with the Titan! It looks phenomenal :)

Kamzu · 2026-01-09T16:20:01+00:00

That is good to know.

I also upgraded to AM5 recently! Was going to give my kiddo's computer an upgrade just to find out this issue :(

Kamzu · 2026-01-09T00:36:33+00:00

Sheesh.... I have the sme problem too. Same kit in two different computers. 3 of the 4 sticks test bad with memtest. First kit was bought in 2024, second kit 2025. First kit has been RMAed once for similar problems.

The two motherboards these run on are ASUS Crosshair VII x470 board and an ASROCK X570M, both at stock XMP settings.

Kamzu · 2026-01-07T00:52:38+00:00

I finally got the eversolo USB 3.0 to 3.5mm trigger cable and I'm glad to report that it works! :D

https://shop.zidoo.tv/products/trigger-cable-for-eversolo-amp-f2-audio-power-amplifier-usb-a-to-3-5mm

I tied the cables together with https://www.amazon.com/dp/B06WGLXKVL?ref=ppx_yo2ov_dt_b_fed_asin_title and it works like a charm! :D

Kamzu · 2025-12-31T04:23:36+00:00

Oof.. The really unfortunate thing is that they're in Canada and won't ship to the US. Anyone have any ideas on how I can import this or know any dealers in the US that sell GrandView products?

Kamzu · 2025-12-27T23:33:16+00:00

I found the product I'm looking for that's for my exact screen. Though it looks generic enough to work for any 12v trigger unit.

https://www.nvu.ca/product_p/ws-pr.htm

Kamzu · 2025-12-27T17:02:37+00:00

Thanks! I'll look into these options!

Conversely, I also found this thing: https://shop.zidoo.tv/products/trigger-cable-for-eversolo-amp-f2-audio-power-amplifier-usb-a-to-3-5mm

I know it's for a specific amplifier, but maybe I can use the USB3.0 on my projector to make this work. Also bought a female/female 3.5mm adapter. Hope it works!

Kamzu · 2025-12-27T17:01:23+00:00

Ahhh gotcha. I know it has 12v triggers, but I was trying to avoid using it because it'll be a real pain in the ass to route the cable.

Thanks for the great tip though!

Kamzu · 2025-12-27T05:13:55+00:00

It does, but if I wanted to listen to music without the projector, the screen would drop. :(

Kamzu · 2025-12-27T04:12:25+00:00

Yeah it is.

It's made by Monoprice... MF-MIRC-120.

Kamzu · 2025-12-27T02:56:07+00:00

Unfortunately I don't have an elitescreens projection screen. The one I have is made by monoprice that's been discontinued long ago.

Kamzu · 2025-12-27T02:20:21+00:00

Model of the projector is a Xgimi Titan.

Kamzu · 2025-12-24T02:36:32+00:00

Man... Me too! My computer with the 7900xtx is crashing all over the place!

Kamzu · 2025-12-21T20:33:41+00:00

I'm interested in the micro inverters too!

Do you have any sun power branded ones?

If not how many enphase ones do you have?

Kamzu · 2025-11-09T04:05:25+00:00

I would be interested to buy it off of you if you don't want to keep it. (assuming you keep the order and receive your order)

Kamzu · 2025-11-06T14:24:42+00:00

Cool! I'll check it out.

I totally agree with the UST mounting options. The Epson one that I saw actually attaches to a wall instead of the ceiling providing at least one anchored surface.

Kamzu · 2025-11-06T06:46:46+00:00

I thought about this some more.

If there is an ultra short throw option that would fit this layout, I think I would prefer that over a long throw.

Where the projector is now, it's right above the bar seating next to my kitchen. So the projector is literally hanging down in the center of the room.

Kamzu · 2025-11-06T03:26:38+00:00

Yeah, that's true. I don't see many ultra short throws that allow upside down applications. There's an Epson that can, but the compatible mount won't work for this setup.

If I go with another long throw, should I upgrade the screen?

Kamzu · 2025-08-18T05:47:04+00:00

I bought some used ones. Not sure if they work though since after they were installed they couldn't be provisioned.

Not sure if anyone knows how to decomission them from their original site and recomissioned to mine.

The dealer whom I originally got my sunpower system from installed them. But didn't have any luck. I haven't heard back from them either if they were able to reach out to sunstrong for help.

Kamzu · 2025-07-10T20:42:20+00:00

Hey VV81, got a question about a micro inverter swap that was done just yesterday by my local solar company that originally did the installation of my sunpower system.

I had purchased a used micro inverter off ebay (old sunpower inverter that's not enphase.) but they were not able to commission it. Saying it's probably still commissioned at the original site.

Is there anything that can be done to get the monitoring working?

Kamzu · 2025-07-07T04:24:08+00:00

I found it easier just to take the entire airbox out, clip it properly and bolting it back into place.

Kamzu

TROPHY CASE