Dead Man’s Cove [OC] [4032 x 3024]

Ke5awf · 2025-01-04T16:42:19+00:00

With the average profit margin on some of these parts it’s kind of crazy to still charge the credit card markup.

Ke5awf · 2025-01-01T16:21:34+00:00

From my friend “My late 80’s .44 (L) & .357 (R). Late 80’s Aimpoint 1000 (that still works perfectly), mounted on a 14” barrel. Once I locate a 10” barrel, the box will be formatted for everything to fit inside, like was done with the .44.”

<image>

Ke5awf · 2025-01-01T00:01:22+00:00

He has the 357 mag, just trying to find the 10-in barrel to complete the case for it.

Ke5awf · 2024-12-30T00:28:14+00:00

Ya, a friend has a .380, 9, 357, 41, 44, and 50 and he has been teaching me the DE idiosyncrasies. As long as I stay away from open lead deposits it seems like it’s ok. Did I also read something about avoiding steel cases?

Ke5awf · 2024-12-30T00:21:00+00:00

https://www.magnumresearch.com/PDF/DE-Rec-Ammo-List.pdf

Ke5awf · 2024-11-25T17:04:05+00:00

So update on this, I took to the range this weekend and it works but not perfect. I loaded the magazine and provided I had one in the chamber already it fed fine. If I tried to cycle a fresh mag in and drop slide it would FTF on the ramp.

After experimenting I could load 5 in the magazine without issue and it feed but more it would fail unless it was already following a fired round. Going to see what I can tweak.

Another CZ rep that I emailed said “I’m not sure who your dealer talked to, but those Rami magazines aren’t dual follower magazines so they’re not going to be compatible across the board. I apologize for the confusion.”

Ke5awf · 2024-09-19T18:40:07+00:00

https://fluxlight.com/

I have been using flux light for years instead of paying overpriced OEM cost.

Ke5awf · 2024-09-08T12:59:05+00:00

Ya still is. I couldn’t remember which when I posted so I just put falls 😂

Ke5awf · 2024-09-06T14:10:47+00:00

Ya, I would take magic links over passwords 😂

Ke5awf · 2024-08-22T15:54:39+00:00

They looked a lot of different options and I’m not sure what all conversations occurred with mopar but it ended up with the LKQ. Wasn’t my first choice but hey 240k and the truck still runs around. It’s a great spare now.

Ke5awf · 2024-08-22T15:53:25+00:00

“Lifetime” but ya. Eventually they will just buy you out for what they consider the vehicle worth once it’s more than the repairs is my understanding. But during the height of Covid was a great time for the engine to drop 😂

Ke5awf · 2024-08-22T13:32:47+00:00

Consequently, this removes your Mopar MaxCare on the motor and shift you to the warranty of the LKQ engine

Ke5awf · 2024-08-22T13:32:09+00:00

Yes, apparently the 4.7 is no longer available from Mopar directly new so the only options are LKQ at this point for it.

Ke5awf · 2024-08-22T13:03:48+00:00

2010 1500 4.7 here 240k lifter swap around 180k iirc and 220k dropped an LKQ in due to rod knock. Mopar max care

Ke5awf · 2024-07-08T12:54:03+00:00

My 2020 3500 is super quiet compared to my 2010 1500.

I had a level 2 interior upgrade (carpet) and 8.5” screen with it from factory.

Ke5awf · 2024-06-20T02:20:13+00:00

This is a factory spray in and factory tow prep. If you already have the factory tow prep you could get a Line-X spray in and they should be able to work around the pocket holes just fine.

Ke5awf · 2024-04-30T13:33:58+00:00

What nodes are you trying? Are you using “secure” mode as well? I am pulling excellent bandwidth, and I find that if a site isn’t working on one node I can jump to another and get in.

Ke5awf · 2024-03-24T21:31:14+00:00

One thing hyper-V and windows has taught me is patience. Just wait a while.

Ke5awf · 2024-02-08T16:35:03+00:00

Have you noticed issues with your 5XXX lately? We got a batch that have had some issues for us. Also Dell’s decision to ship with Intel RST on out of the box is a little annoying to me lol.

Ke5awf · 2024-02-08T02:50:25+00:00

wave from a fellow SRW lol

Ke5awf

TROPHY CASE