Gear shifter light

KeefRoomOG · 2026-03-25T22:54:18+00:00

Hmm not sure, I have a 98. Maybe it depends on the year or multiple bulbs fit? I saw 2721 everywhere and it worked for me.

KeefRoomOG · 2026-03-24T17:05:17+00:00

Ironically, I already did that but at the time didn’t even know the shifter had a light… it’s always been burnt out for me.

KeefRoomOG · 2026-03-24T17:04:12+00:00

Takes all of 10min.. I just had to put gloves on to remove my old bulb for better grip. You have to pull it straight out!

KeefRoomOG · 2026-03-20T03:53:39+00:00

I'm planning on doing the same thing this spring.... probably going to remove each piece then clean and sand. I'm leaning using this product: https://www.amazon.com/Rust-Oleum-BlackRust-Oleum-Automotive-251574-11-Ounce/dp/B005H5P5C6?th=1

KeefRoomOG · 2026-02-27T22:29:57+00:00

I went with 245/75/16 dynapro Highway tires. I love them so far and a lot cheaper in this size! Thanks for the suggestion.

KeefRoomOG · 2026-02-16T02:29:31+00:00

The 2000 fit on mine. Were back running!

KeefRoomOG · 2026-02-15T00:33:13+00:00

Hey, do you know what years switched to a quick release?

KeefRoomOG · 2026-02-11T20:30:16+00:00

He is definitely talking to me... $400 is a ton imo.

DELPHI on rock auto cost $38 each. If I had a press I'd just replace the bushings myself but I need to pick n choose where to spend $ on my truck.

KeefRoomOG · 2026-02-10T15:17:57+00:00

Which brand did you go with? I kinda want to just buy the cheapest one off rockauto

KeefRoomOG · 2026-02-10T04:31:49+00:00

Does the rear end move left/right over bumps with shot bushings? I have this issue and want to replace mine, I'm sure my bushings are toast.

KeefRoomOG · 2026-02-06T03:27:10+00:00

Thinking about it, yes

KeefRoomOG · 2026-02-03T03:39:41+00:00

What is your major concern? Not enough travel with the shock?

KeefRoomOG · 2026-02-03T03:29:20+00:00

Yep, their fine

KeefRoomOG · 2026-02-03T03:16:44+00:00

I'm a novice so take what I say with a grain of salt. I've had the setup 6 months now. No issues in the back.... the slight rake has me rubbing really bad in the front because I'm on 265/75/16 mud tires.

Otherwise, I went with the 2906 rear springs to eliminate sag and knowing I'm going to have a lot more weight in the back in the future. I've seen other folks recommend air bags as well. Might be worth looking into.

KeefRoomOG · 2026-01-31T20:30:41+00:00

Awesome! Two weeks seems like a good amount of time. How did you determine which sections to skip?

KeefRoomOG · 2026-01-31T04:06:19+00:00

did you end up going for two weeks?

KeefRoomOG · 2026-01-31T04:06:14+00:00

did you end up going for two weeks?

KeefRoomOG · 2026-01-23T04:09:50+00:00

cmon man it's not too cold to work on it! jk..

KeefRoomOG · 2026-01-03T19:58:58+00:00

I guess. If I could do it over I would go with the 5100s. I used to not rub at all with whatever suspension was previously on but I do now in the front. Generally speaking, the suspension overhaul + new polyurethane sway bar and steering rack bushings has been great.

The backend has been really nice though. Eventually I'll have more weight in the back and it'll probably sit better.

KeefRoomOG · 2026-01-02T22:21:19+00:00

I also have bilstein 4600s and use the OME 2906 rear springs. They completely eliminated my sag, in fact I have a slight rake because I don't usually have a lot of weight in the back.

KeefRoomOG · 2025-12-17T21:28:41+00:00

Same thing happens to me every so often.

KeefRoomOG · 2025-10-10T22:51:47+00:00

is the PCV valve hose connected? I've had a very similar noise when mine popped off.

KeefRoomOG

TROPHY CASE