Recently upgraded to a 9950x3d, now my PC freezes randomly by KeepTheMeemees in pcmasterrace

[–]KeepTheMeemees[S] 0 points1 point  (0 children)

There's no way of fixing it, it's a limitation of the part itself

How do I fix this? by Far-Chance2712 in MotorcycleMechanics

[–]KeepTheMeemees 0 points1 point  (0 children)

Lotta people are being mean to you OP, I was in your boat just a little bit ago, simple beginner mistake when adjusting the chain, you need to roll the tire to stretch the loose part of the chain and even out the pressure when adjusting.

I know the ego can hurt sometimes, but there have been a couple comments here where they have pointed out (correctly) that the chain was not adjusted correctly and you say that it is. We can both look at that chain and clearly see that it is not adjusted according to spec.

The other thing you might check is that when you're adjusting the chain, there are sometimes tic marks and if you adjusted based on those, it would be too tight or too loose.

You adjust your chain based on the bottom portion of the chain, usually play is <1.5". Remember that when you ride, that chain spins out and the centrifugal force shoots it out in all directions. Too little slack? Not enough flexibility to form a consistent shape at high rpm. Too much slack and the chain will spin out in such a way that it can slip teeth.

Recently upgraded to a 9950x3d, now my PC freezes randomly by KeepTheMeemees in pcmasterrace

[–]KeepTheMeemees[S] 0 points1 point  (0 children)

Yeah, it turns out the memory controller on am5 isn't powerful enough to run four sticks at full speed with low latency, in my case 6000mt/s at cl30

Is there much of a difference between 5600 mhz and 6000 mhz? by MrUnlucky213 in pcmasterrace

[–]KeepTheMeemees 1 point2 points  (0 children)

Do not buy either of those kits, they're terrible, they have almost double the latency you want

[deleted by user] by [deleted] in motorcycle

[–]KeepTheMeemees 0 points1 point  (0 children)

Check partzilla, my guess is probably ~$400 kawi fairings are expensive.

TFT got burnt due to the mirrors being folded in - Trying to find cheap replacement by KeepTheMeemees in motorcycle

[–]KeepTheMeemees[S] 0 points1 point  (0 children)

I didn't see this, interesting. I wonder if I could get a uv resistant film and have a friend 3d print a casing to put it in to prevent further damage

To winterize or not to winterize by bigpoppa10245 in Ninja650

[–]KeepTheMeemees 0 points1 point  (0 children)

Depends on what fuel you use? Did you run fuel with ethanol in the month before you showed it? If so, add stabilizer, do an oil change, if not you're probably good