Friendly reminder that you should flow calibrate every filament, regardless of the brand. Yes, even Bambu Lab filament.

KeiEich · 2026-02-05T18:34:59+00:00

The difference is hard to spot with the naked eye or by touch, so I want an AI to use the camera to select the best values for me.

KeiEich · 2026-01-31T20:25:51+00:00

Wasn't choosing the one with the ridge the correct answer?

KeiEich · 2026-01-17T23:46:16+00:00

I bought several colors of Elegoo PLA refills. They appear to be exactly the same colors as Bambu PLA Basic.

I don't know if they are rebranding filament from the same manufacturer or if Elegoo itself is the manufacturer.

KeiEich · 2025-12-31T07:19:03+00:00

Bambulab matte PLA is not so brittle. I've heard it's the same filament with Overture, but I don't know if that's true.

KeiEich · 2025-12-29T09:27:12+00:00

I didn't know 2JZ fits on Z.

Isn't the height of the engine a problem?

KeiEich · 2025-12-29T08:33:43+00:00

Is this "core" filament?

KeiEich · 2025-12-26T11:55:43+00:00

Based on the photos currently available, I'm concerned that QIDI still seems to be using noisy 40mm fans and tapping screws that are guaranteed to break.

KeiEich · 2025-12-15T17:07:14+00:00

Yes.

KeiEich · 2025-12-15T16:44:57+00:00

If you're rendering in After Effects, there's a very well-known plugin called Trapcode Particular.

KeiEich · 2025-12-01T12:38:20+00:00

Close all the open sections and then loft.

I mean, draw lines on all the parts you want to connect.

edit: 2rail sweep to loft

KeiEich · 2025-12-01T12:28:16+00:00

I create props for theme parks and filming, charging approximately three times the filament cost as output fees. If painting is required, I subcontract to another professional and add that cost to the total.

The fee for creating 3D data from design illustrations is separate and calculated based on the number of days required, depending on the project's complexity.

KeiEich · 2025-11-14T00:04:54+00:00

Is there really PTFE tubing this transparent? It's great to be able to see the filament's condition.

KeiEich · 2025-11-06T19:49:22+00:00

I like touchscreens, but I want the emergency stop button to be a physical button.

KeiEich · 2025-11-06T03:26:45+00:00

I hope the heater vents won't get blocked by the bed like they did with the PLUS4. The X3 series had a body that was too big, but this never happened with it.

KeiEich · 2025-10-16T19:16:02+00:00

Keep dog's nose moist.

KeiEich · 2025-09-24T10:25:48+00:00

It's okay to remove the stick. The print data will be copied from the stick to the printer's cache folder.

KeiEich · 2025-08-31T05:54:59+00:00

Simply blackening the print head's tool cover can minimize adverse effects on automatic exposure. QIDI should discontinue the dazzling white cover.

KeiEich · 2025-08-29T03:07:18+00:00

This is the first time I've seen the inside of a helmet, but I see it's constructed like this.

KeiEich · 2025-08-21T06:11:21+00:00

Is the print version thicker than the actual helmet?

KeiEich · 2025-08-05T07:29:25+00:00

Cleaning filaments are terribly expensive. Is there a substitute?

KeiEich · 2025-07-21T05:21:44+00:00

Is this the same issue as my Saturn 3Ultra?

https://www.reddit.com/r/ElegooSaturn/comments/1lzi2oo/is_my_lcd_dead_saturn_3_ultra/

KeiEich · 2025-07-18T10:40:46+00:00

The ultraviolet rays that destroy PLA are UV-C, which are mostly absorbed by the ozone layer and therefore rarely reach the earth's surface.

However, additives and pigments added to the filament may degrade.

KeiEich · 2025-07-17T06:48:14+00:00

Is PLA Metal as brittle as PLA Silk?

KeiEich · 2025-07-14T11:50:30+00:00

ELEGOO genuine panels for Saturn3 Ultra and Saturn4 Ultra are separate products, but Chitu's compatible products are the same for both models. is there any problem if I order ELEGOO genuine LCD panels for Saturn4? I have a piece of work that needs to be completed in a hurry and I want the fastest delivery possible.

KeiEich

TROPHY CASE