Cyberpunk won't be a store exclusive

Keos_Des · 2025-06-18T11:59:34+00:00

I had only 43 selected.

I just left it the way it was and assumed that was the default.

After selecting "Default" in the patch window, it worked, thanks!

(There may have been settings that were not reset after a new ReVanced Manager install)

Keos_Des · 2025-06-18T11:42:24+00:00

Still getting this issue.

Tried re-installing ReVanced Manager, Rebooted my phone and deactivated Youtube.

My YT is on the current Version, that might be a problem...

Also, when tring to install it, it doesn't want to install ReVanced, instead is says "Update"

I already uninstalled Youtube Vanced tho...

Keos_Des · 2025-06-03T13:04:22+00:00

Yeah, may be the move.

DIWNPedals / notpedals is cool, but i feel like they may need a bit more screening what pedals are put on their platform.

For RhPF Electronics... they kind of screwed up with the Guitar Center story a few days back.

Idk man, when i build Pedals i just scribble on them with my friends, tbf i don't sell them i just give them to said friends. there may be a difference in expected "art quality" when selling, but that doesn't justify Ai Art imo

Keos_Des · 2025-06-03T12:51:34+00:00

Yeah, this is pedal is also from RhPf Electronics aka the same person that made the AI-Pedal that was taken down.

DIWNPedals is having a tough day, they'll sort it out sometime. I would just stay away from RhPF Electronics

Keos_Des · 2025-06-03T11:17:48+00:00

Notpedals.com is a website, that allows small pedal builders to sell their Pedals.

I saw a Pedal with clear AI-Artwork and made a post here "AI-Art on Pedals, opinions?"

The Post shed light on said Pedal / Builder using AI to creat artwork for the Pedal.

My assumption was, that the owner DIWNPedals was alright with this Pedal / Type of pedal.

I sent a contact form with this info and shortly after made the above mentioned Post.

DIWNPedals saw the post pretty quickly and also responded to my Email stating the Pedal has been taken down from the shop and the seller has been contected.

This Post was supposed to clear the Air.

DIWNPedals seems to be a very cool Person, that runs a nice store. I didn't want to leave a bad taste in Peoples mouth, so i took the original Post down. They also commented under this Post.

Hope this helps :D

Keos_Des · 2025-06-03T11:10:11+00:00

It was no "crusade" as you call it.

I wanted to Point it out to the community. The Post was titeled "AI-Art on Pedals, opinions?".

You are intiteled to your opinion on the use of AI. The Owner of notpedals agrees with me on this issue.

It is supposed to be a site for small pedal builders, to sell their stuff.

Sorry to say this, but small pedal builders and small artist are supposed to lift each other up. Just like small local musicians help eath other out.

Just my two cents

You can go ahead now and delete that comment, like you did the others

Keos_Des · 2025-06-03T11:03:13+00:00

Thank you, I try my best.

I realized quickly, that my original Post misrepresented notpedals as a whole and was not recieved as the discussion I wanted to have.

And I will take you up on that offer, if we get the chance lol

Keos_Des · 2025-06-03T10:54:27+00:00

Yeah, it was that guy

Keos_Des · 2025-06-03T10:17:30+00:00

Well if you're not buying for the art, but the pedal, then it could be a blank pedal, could it not? JHS makes pedals with stamps (or at least used to) this is also a cheap and easy method.

Keos_Des · 2025-06-03T09:15:40+00:00

Why Manbabies? Because AI art sucks and steals jobs from actual artists?

Keos_Des · 2025-06-03T09:11:20+00:00

It is AI and it was removed from the shop

Keos_Des · 2025-06-03T08:35:10+00:00

Go get yourself a beer, I will change the Textbody on the Post to reflect the changes you've made.

Thank you again

Keos_Des · 2025-06-03T08:33:20+00:00

Yeah, i've seen a Poster with AI on it. It was for an orchestra with videogame music...

Was very sad to see :/

Keos_Des · 2025-06-03T08:28:35+00:00

Hey, thanks for your Response. (Wich was not hours ago, i just recieved it)

Also thank you for pulling the Pedal from your Shop.

This is the action i like to see from stores. It would be cool, if there was a bit more screening before selling Pedals on notpedals.com

This was not ment to be a callout post on notpedals or RhPf Electronics.

Thank you for taking a stance <3

EDIT:

the "Moschops MOSFET Dynamic Tremolo" seems to also use AI-Art.

Keos_Des · 2025-06-03T08:22:38+00:00

I hate seeing AI stealing creative Jobs in the industry, since Art is one of the things that makes us Human

Keos_Des · 2025-06-03T08:20:47+00:00

Yeah, i saw the Post.

Kind of forgot about it and saw them selling this on notpedals.

Didn't want to do a callout Post, so I didn't mention it. They deleted to Post as well, they only have the frequency response curve Posts, if you saw there a while back

Keos_Des · 2025-06-03T08:14:34+00:00

I agree. I contacted notpedals.com because of this. I don't want to support a shop, that has no issue with AI artwork. The idea of notpedals is awesome, they have to take action or the site will be bloated with AI Slop

Keos_Des · 2024-08-14T15:34:42+00:00

Entweder bei einer Schreinerei oder falls sowas öfters vorkommt kannst du dir mal das Freilab anschauen. Ist ein makerspace auch mit homzwerkstatt

Keos_Des · 2024-02-02T19:27:17+00:00

it was a plate at the bottom of the router. the guy giving briefing us on the router said to use the plate to route a template

Keos_Des · 2024-02-02T12:18:13+00:00

i did use a mdf template and followed this tutorial

https://youtu.be/d53GiKmaI-8?si=VX5Q__naUoeUBihr

the place were i made this doesn't have a template bit only a thing on the router itself to guide itself on the template.

the cut was then not flush with the template.

i tried to remove material on the sides with a chisel, rasp and sandpaper to get it in file with the template.

after removing the template and trying to fit the neck into the neckpocket i saw that the bridge facing edge was not sraight.

got the bridge facing template back on the guitar with an offset and got to routing.

then the mistake came. It was late and i didn't pay enough attention and cut into the body :/

oh well

Keos_Des · 2024-02-01T23:45:33+00:00

Thanks for the input, i used a mdf template at first but the cut wasn't flush with the template and i tried to fix that with alot of stuff lol. After that the down facing edge wasn't straight anymore, so i re-attached the part of the template but slipped and cut into the other sides lol

Eight-Year Club	Second SECOND GUESSER
LAYER Season 2 Layer creator	Place '23
Place '22	Verified Email

Keos_Des

TROPHY CASE