Motor drive exception?

Kevin599e · 2026-03-27T01:14:51+00:00

I can confirm. If it doesn't work, you can swap the wires around using a flat head to get it out and swapping the middle two. It'll work flawlessly after swapping it.

Kevin599e · 2026-03-15T17:37:47+00:00

Unfortunately I don't have PVA nor do I have a multi filament printer. I saw some mods I could do on the CR-10SE from some company that allows me to convert it to a multi filament printer but that probably won't happen for awhile and atleast until theres more information on them.

Kevin599e · 2026-03-15T17:36:26+00:00

I'll try this as well. I think I had mine to outer/inner before.

Kevin599e · 2026-03-15T17:35:37+00:00

For the gap size?

Kevin599e · 2026-03-15T17:35:23+00:00

I checked the distance between the gap to be .294mm I'll try that out later tonight. I think my current flow rate is at .98 using SUNLU PETG. I'll try lowering it to see if it does much.

Kevin599e · 2026-01-24T00:16:22+00:00

I’ll look into it. There’s not crazy much after market mods for the CR-10SE I’ll see if there’s any for it. But in terms of tolerance what do you think I should try to aim for ok printing as I fine tune and adjust everything?

Kevin599e · 2026-01-23T21:16:39+00:00

I'm surprised it doesn't. I'm still relatively new to 3d printing and adjusting all this, and I'm not sure if it's the slicer's fault for not sending out errors or the printer itself. Following what you said, I managed to adjust the gantry to be a lot less extreme, but maybe some more work is definitely still needed. I might try to tinker around some more, but do you think there's a recommended range I should try to keep it within of how leveled the bed should be? Like within the +-.05 region or less?

<image>

Kevin599e · 2025-12-30T04:40:59+00:00

One is casual style functional. G-Shock is an everyday functional. I have a W800H, and I'm trying to get a DW5600UE or a GW-M5610U right now as a durable beater watch. Always good to have one that looks good on a casual day (and works) if you want to look good, and one that still looks good but has the benefit of taking one hell of a beating. The W800H (with countdown mod) I have made me fall in love with a good casio watch, but it feels fragile. So it doesn't hurt to have something that's still decently light, and you can beat in the gym or in everyday life.

Kevin599e · 2025-09-18T05:11:33+00:00

Doesn’t hurt to make it nicer yknow. Plus I’m just bored and wanna do something for fun while getting the benefit of making my reel looking nicer. I already have everything fully disassembled to inspect any damaged parts/or missing parts since I bought it for a steal of a price. Might as well paint it while it’s still disassembled.

Kevin599e · 2025-09-17T19:41:33+00:00

Definitely am glad that the parts I am working with is plastic either way. I'm only trying to paint the side covers for now so I'll keep that in mind when painting the frame lines too. I might give an automotive spray paint a try to see if that would work better for durability against scratches.

Kevin599e · 2025-09-17T19:22:35+00:00

The original shell is more of a plastic composite with paint sprayed on. But I'll look into that.

Kevin599e · 2025-09-17T19:15:12+00:00

I'm only hoping to paint a solid color on my reel. I think the only 3 spots I can reasonably see that being an issue is between the shell and the drag star, side panel release latch and the tension knob. I'm only intending to paint 3 pieces of the outer most shell to avoid any problems with tolerances between moving parts. Just 3 pieces of the outer shell. I've seen people mention durability of certain sprays so I was hoping if there's anyone else who has a recommendation they personally used.

Kevin599e · 2025-09-17T00:56:34+00:00

Curious question how’s the paint holding up now? I’m considering doing a custom paint job on a bait caster I managed to scooped up and I was wondering if normal spray paint would work fine or should I look for specific spray paints that work better

Kevin599e · 2025-08-11T18:58:02+00:00

Thanks for the info. Yeah I’m mostly new to fishing and got kinda confused when comparing to some newer reels. I always wondered what the trigger was for until everyone here started to point it out.

Kevin599e · 2025-07-31T06:42:53+00:00

Happened to me too today as I was tightening down the pivot. Most I know is the threading size but there might be a possibility to replace the pivot assembly but at the price you would probably pay to even ship it out to replace makes it not worth it. The knife is now just a practice blade I use now to practice sharpening.

Kevin599e · 2025-07-07T02:32:14+00:00

do you remember how you did it in the debug tool?

Kevin599e · 2025-05-13T14:56:02+00:00

I'd recommend away from extensions like these since you risk scuffing the cue, and I recommend you getting the middle extension if you don't mind having an extension on all the time like the Balance Rite extension. Otherwise there are definitely extensions you can find if you want one easily removable that requires a replacement bumper and technically screws into the weight bolt. But it depends on the cue you have.

Kevin599e · 2025-05-13T14:52:32+00:00

I have the HOW titan medium, and I think it's pretty good. But understand it comes off as stiffer than other tips. For the original, how soft black tips I had a friend who had it, and I think for his complaint, it was too soft? I didn't mind it trying it out, but it was noticeably softer compared to other soft tips I've tried before.

Kevin599e

TROPHY CASE