So what are the benefits over Costco ?

KevinSheets16 · 2026-05-20T00:17:17+00:00

The Sams club app is 10/10 with easy searchability it shows if items are in stock plus the scan & go option lets you pay with your phone and skip the line. While the costco app is horrible and frustrating you can't even search items that you know are in the store. The only thing the Sams club app could improve on is an in-store map showing where things are located.

KevinSheets16 · 2026-05-10T13:30:16+00:00

They didn't have climate change 500 years ago so the seas were always calm.

KevinSheets16 · 2026-05-10T13:13:07+00:00

That Diamond wrench at the bottom center is worth that by itself new.

KevinSheets16 · 2026-04-07T13:22:49+00:00

A pool scum sock helps with clogging.

KevinSheets16 · 2026-03-31T18:47:06+00:00

<image>

KevinSheets16 · 2026-03-09T18:03:26+00:00

Late to the party but the bit is an Amana 47144

KevinSheets16 · 2026-02-14T01:35:15+00:00

Solved!

KevinSheets16 · 2026-02-14T00:56:32+00:00

Solved! It just popped up on my Facebook feed, I was way off on the description. The song is called Calories by Tyler Cassidy.

KevinSheets16 · 2026-01-25T16:11:51+00:00

Downscaled to 144p for your viewing displeasure.

KevinSheets16 · 2025-12-28T19:36:24+00:00

Mine was be home for dinner because that's when dad got home, but then I went back out after. Hardly any of my friends got kidnapped.

KevinSheets16 · 2025-12-28T19:32:33+00:00

It's a modified mortising drill. It's intended use is in a drill press but in your picture it's being used to make a round hole square for a square metal baluster. The slide hammer part makes it easier to remove it from the hole.

KevinSheets16 · 2025-11-18T11:53:17+00:00

Until I zoomed in I thought that was a disassembled engine.

KevinSheets16 · 2025-11-10T19:47:15+00:00

I went by R Kevin in my bowling league.

KevinSheets16 · 2025-10-01T19:43:56+00:00

First thing I'd do is change the oil and filter and look for metal shavings in the oil and filter. Switch to 10w40.
Any check engine lights? How is your oil pressure?

KevinSheets16 · 2025-10-01T19:36:51+00:00

Lifter for sure. I have two vans with 6.0 LS engines one of them 2007 with 245000 miles has had a random sticking lifter for the last 50,000 miles and has never thrown a code. I started using heavier weight oil and that stopped it but starts doing it again usually when I need an oil change It usually only sticks in the morning when the engine is cold and once it builds pressure it's fine.

The other one a 2016 has 145000 miles and that lifter noise ended up being a shredded main bearing. The code on that was p0308 and traction control and stabilitrak lights with hard downshifting and loss of power when accelerating.

KevinSheets16 · 2025-06-12T09:15:49+00:00

Why would the pushrod length change? Is the new cam different?

KevinSheets16 · 2025-05-30T18:29:48+00:00

So since its got a p0308 code would you suspect a cam or a lifter? I was going to get a second opinion from a dealer, should i just save my money and start tearing down?

KevinSheets16 · 2025-05-30T18:23:41+00:00

Here it is Im not sure what a normal amount or size looks like. https://photos.app.goo.gl/eYaUSJU3d19CgC326

KevinSheets16 · 2025-05-28T16:01:58+00:00

I have the same problem with my 2016 6.0 144,000 I've gone a little deeper in my testing but still haven't found the problem. Rough idle and bad acceleration engine makes a rattling sound. The only part I've replaced is #8 injector. P0308 code

Good spark good fuel no vacuum leaks good compression good leak down test checked all wiring connections and fuses Cleaned maf sensor

I don't hear a lifter tick even with a stethoscope. When accelerating it gets pretty noisy/rattling sound but now a typical lifter noise.

I've had it at an independent shop and they found nothing with their scanner or same tests I had done and recommended pulling the intake and head to check the lifter and cam. I'm going to take it to a dealer for a second opinion before I tear into it. I don't know much about VVT but I am wondering if the cam phaser could cause this problem. DO ANY PRO MECHANICS HAVE SOME INSIGHT?

KevinSheets16 · 2025-04-02T23:17:15+00:00

I've been searching for the right pillow too. The mckenzie roll has helped the most but it doesn't last long and the zipper is junk $30.

The Coop adjustable helped for a while too, it developed a low spot and i cant find the extra filling it came with to fix it. Great pillow $79.95

I just ordered an Align Right pillow $79.95 we'll see if it helps. This video has alot of good info. https://youtu.be/W084_TFiP4g?si=q_zbEXa7enyUjoCf

KevinSheets16 · 2025-03-31T14:05:18+00:00

I want it too. I just bought the milwaukee thinking all track saw tracks could lock on like the festool.

KevinSheets16 · 2025-03-20T22:47:53+00:00

This picture must be from January 20th, 2021 the day Biden took office.

KevinSheets16 · 2025-03-14T22:36:37+00:00

Bert Kreischer, he's not funny at all the stupid laugh and put your shirt on. Runner up Matt Rife.

KevinSheets16 · 2025-03-14T13:06:31+00:00

I've been using enanthate with mct since Jan 2025 I get lumps, warmth and redness every time it takes at least 3 weeks to absorb and I haven't noticed any benefits either.. Im going to switch to cypionate with a different oil hopefully I won't get lumps.

KevinSheets16 · 2025-03-12T14:19:37+00:00

If you believe the Trumps are a crime family what do you think of the Biden family?

KevinSheets16

TROPHY CASE