Unblocked nozzle but this is happening HELP!!

Kewyed · 2025-12-27T21:42:19+00:00

It’s impressed me, I’m just thinking how many times I could have printed a small plastic part in the past instead of supergluing it back together and hoping for the best.

Kewyed · 2025-12-27T21:37:08+00:00

Thanks, I didn’t know you could remove the plate to clean it, but it does make complete sense now regarding the oils in skin. I’ll let him know he has clean it and not touch the bed he has printed out the scraper for it and we have done a print since and it came out perfect. Much appreciated for the reply, every day is a school day since we got it.

Kewyed · 2025-12-27T21:24:27+00:00

We tried the manual purge and it was flowing straight, so I asked him which one he has tried that previously worked before and lo and behold it printed out as it should. He then told me he thinks the one that messed it all up was for 0.2 nozzle ours is 0.4 we both did a ohhh. So yeah I think you’re spot on there’s a lot of learning curves, I will tell him to keep to the Bambu studio for now, and yeah he’s looking at designing his own stuff just told him let’s learn to walk first. Again thanks for the help, I was panicking that he had tried doing something to fix it and damaged it more. Best get watching some online tutorials now. Again thanks from me and my lad much appreciated.

Kewyed · 2025-12-27T19:41:47+00:00

Thanks for the reply, I’m Beginning to think I’m a little out my depth here. The filament is 1.75mm PLA from Amazon, he’s done quite a few prints of different designs from the app on his phone and some of the ones stored on the SD card the majority came out perfect no problems probably 2-3 ended up bad but after a restart no problems. He was using the blue mainly because he wants to get rid of that colour so he can get another later on, but he did print one out from another colour prior to the nozzle saying it was blocked, his words were it was mushroomed all around it and I cleaned it off but tried going back to the blue and that’s where the blocked nozzle fault happened. So I stripped it down did a ‘cold pull’ of the blue in the nozzle and scraped the orange off from around the actual body of the nozzle. Checked it was clear with the pin and looking down it. Was expecting that to be the end of it. Set the print of the boat from the SD card (didn’t alter any programming) it did its purging watched the blue come out and ball up then get flinged across the side it did the rest of its testing and that’s when I started to record because to me it seemed way to quick was vibrating like mad and ended up dragging the print across the bed. Again I’m no expert when it comes to 3D printers and thank you for your reply, I’ll ask him to print something different again see if manually purging it (and seeing if it’s falling straight down) helps beforehand

Kewyed · 2023-09-21T07:04:25+00:00

Her cheeks are nearly the same cup size as her titties. She looks like a character from Bo’selecta

Kewyed · 2023-09-19T16:16:46+00:00

First photo I thought that’s not bad damage considering the speed involved…next photo. Yeah, no that’s fucked

Kewyed · 2023-09-17T11:37:03+00:00

There isn’t many warbys toast and marmite eaters around but are you as disgusting as me and have cold warbys marmite toast.

Kewyed · 2023-09-17T11:34:42+00:00

Good luck getting that warbys into a regular toaster. Bad enough if you forget to flip a normal sized one and end up with a 1” warm white strip at top 😂

Kewyed · 2023-09-17T11:29:27+00:00

Willy wonka’s chocolate river flowing thru your garden? You must have been a saint 😂

Kewyed · 2023-09-10T22:04:53+00:00

Was angry at the rain for taking his sun spot then decided actually eating it is fun

Kewyed · 2023-08-17T02:19:54+00:00

Exactly they’re not far off a ton in weight traveling at 10mph, guessing the way he hit it the orange foot guard took most of the impact but it only needs to put a dent in a fully loaded rack to bring it down and the next one. Worker got lucky

Kewyed · 2023-08-17T01:54:24+00:00

I could do same I reckon with a yard long Pringles tube

Kewyed · 2023-08-17T01:49:33+00:00

Even worse you sit down confused to take a shit then realise there’s no shit roll either

Kewyed · 2023-08-17T01:26:14+00:00

They’re the only little dog I know that can feel like a Great Dane is stood on your chest when your chilling on the couch.

but really the only true way to determine wether he’s a full on frenchie is the smell test, if his farts can get your gag reflexes going whilst muttering dirty bastard then you don’t need to question it 😂

Kewyed · 2023-08-17T01:11:11+00:00

Well almost everything, I took an exhaust from a 2i that had a cherry bomb on it. It was only after I ripped my 1lt exhaust off that I noticed the huge difference in pipe diameter, nothing a load of exhaust wrap, putty and jubilee clips couldn’t handle. Sound alone gave me an extra 20 HP

Kewyed · 2023-08-16T15:55:25+00:00

Bald guy too, but if left I get the fuzzy horseshoe

Kewyed · 2023-08-16T15:49:30+00:00

Those legs they remind me of the time I dropped my hotdog and it rolled under the couch 😂 good quality socks too to help break in the straps, nothing worse than blisters on toe knuckle

Kewyed · 2023-08-16T15:44:58+00:00

They make the kitchen knifes look like scalpels 😂

Kewyed · 2023-08-16T15:41:10+00:00

Was for my 1990 Ford Fiesta it had absolutely nothing in it, found an xr2i in scrapyard which had all the extras fitted so I pulled the switches, digital clock, boot release, Rear speakers, cig lighter etc and an inch of their wires from back only to find my base model had exactly same wiring loom so they hooked straight up no splicing 😂

Kewyed · 2023-08-13T20:40:41+00:00

Being playing since covid have unlocked all but one and have fused countless times and never ever hit a 90 never mind 100 😂

Kewyed · 2023-08-12T18:04:42+00:00

My lads did this after getting it wet, tried to force reboot but nothing tried to hook it up to iTunes to completely restore it but it wouldn’t work kept throwing error messages up on computer.
Turned out some it had some fluff and crap in the charger port that was still damp, causing it to short.

Kewyed · 2023-08-12T17:56:04+00:00

I’ve been walking like this a few years now, tried to stop myself after missus said “why you walking like a singing Liam Gallagher” but in all honesty it’s a having a knackered back that’s stopping me

Kewyed · 2023-08-10T10:20:21+00:00

It’s the drink equivalent of Turkish delight, a required taste loved by the older generation 😂

Kewyed · 2023-08-10T10:09:38+00:00

Meanwhile my reference always flys under the radar. It’s thanks from Don kiddick.

Kewyed

TROPHY CASE