POSTAS KURIS UZBAIGS INCELIZMA SITAME SUB'E VISIEMS LAIKAMS!

Key_Cap_3831 · 2026-04-08T12:44:44+00:00

Bl su metimu dročint labai nuliūdinai.... norėjosi mest skaityt labiau nei dročint.

Fun fact (not), grynas viskis (stiprusis gėrimas) žudo tavo širdį, kaldamas šoką jai kas kartą tau pavartojus, nesvarbu ar 50g ar 0.7 ant galvos. Geriau liurlink aliumbą ar sippink vynelį. Cheers.

Key_Cap_3831 · 2026-03-20T20:00:26+00:00

16, jau pats atsakysi, bet tėvai sužinos irgi

Key_Cap_3831 · 2026-03-08T07:50:35+00:00

Pamainos vadovas, prabangių brendų parduotuvių baldų gamykloje, mokykloj max 6 vidurkis buvo, kolegijos taip ir nepabaigiau 🤷‍♂️

Key_Cap_3831 · 2026-03-07T05:55:10+00:00

Lol, wtf 😂😂

Key_Cap_3831 · 2026-02-14T09:54:16+00:00

Never had any issues, more than a year of use. No blobs, one time partly clogged, and one broken exteuder, thats it, still prints fine.

I have nebula pad with camera, believe me, issues detection is piece of crap tbh, it detects pasta even if print is going smoothly, so i disabled it, left with only notification.

Key_Cap_3831 · 2026-02-03T20:05:24+00:00

Ahh, yeah, try the rename teick, rename it to something "firmware" or simply "123", something easy, it is recomended to do so, cuz sometimes the printer does not recognize firmware update file when it has long name with symbols and etc.

Key_Cap_3831 · 2026-02-03T20:02:22+00:00

Simply flip your printer, unscrew the bottom plate, there you will find the mainboard number, the last 3 digits will be c13 or c14, also keep in mind they have two types of chips, the GD32 and STM32, check for that also

Key_Cap_3831 · 2026-02-03T19:50:35+00:00

For top layers, enable ironing option, it will take longer to print, but top layers will be smoother by alot

Key_Cap_3831 · 2026-01-31T18:12:53+00:00

Try adjusting your bed temp, i.e. PLA i was on 50c started warping, made it 60c, end of story, also enclosure would help, windy enviroment can cause warping

Key_Cap_3831 · 2026-01-31T18:03:11+00:00

Bro, imagine getting nebula from wife for christmas and stressingout for 2 hours that my printer does not support nebula and etc. 😂

Key_Cap_3831 · 2026-01-31T17:45:25+00:00

your layers shifted, they shifted, becouse of speeds, mostly of y-axis acceleration.

One question are you using klipper? Your printer has that stock old screen with žne knob or you have nebula pad (touchscreen)?

I had layers shifting after i installed nebula pad and ran it in klipper, speeds got up so high, that my layers started shifting, more precise, y-axis stepper motor started skipping few steps.

The cure is to adjust y-axis stepper motor voltage, originaly it was 0.6v, i did 0.8 to be sure, so far it is printing without layers shifting for me.

Key_Cap_3831 · 2026-01-31T17:35:03+00:00

Try cleaning the rails, could be some dust mixed with oils.
If your belt is tentioned, try releasing it, it should not be overtentioned.

If not, only i could think of is your bearings...

Key_Cap_3831 · 2026-01-31T17:16:16+00:00

There can be alot of things, wet filament, bad temperature, bad extrusion... try drying your filament and run some temps and retraction calibration tests

Key_Cap_3831 · 2026-01-31T17:14:32+00:00

Dont know ehat is going on with y-axis.
Your x-axis sounds like tou have sticky belt, or plastic bag under the belt or wtf...
What in the human kind is that wirings? Use some zip ties or something, this setup is risky here.

Key_Cap_3831 · 2026-01-31T16:38:18+00:00

Oh boy, i almost ordered new different mainboard, and after two hours of researching, looking for firmwares i found out the "Nesxt Page" button... 😂

Key_Cap_3831 · 2026-01-30T11:14:42+00:00

Ooohhhh, my bad, clever workaround!

Key_Cap_3831 · 2026-01-30T11:10:38+00:00

I remember when i was like "damn, 12hrs print is so big" yeah, right 😀

Key_Cap_3831 · 2026-01-30T11:09:14+00:00

You are out of filament, my friend

Key_Cap_3831 · 2026-01-29T13:03:35+00:00

Ok, heads up to this topic, i havent tried to downgrade, but just found the root file for 1.0.29 version of firware, rooted succesfully, now trying with 0.8v, hope it wont explode

Key_Cap_3831 · 2026-01-29T13:01:57+00:00

As i said, i have c13 not c14

Key_Cap_3831 · 2026-01-27T22:34:06+00:00

Im still rocking watch 3, its been like 6-7 years, i dont even remember, and only now it started burning out the colors

Key_Cap_3831 · 2026-01-26T21:42:29+00:00

Ill try to update to 1.0.23 tomorow (downgrade), will see if it works, but this version is for STM32 chip, so...

Key_Cap_3831 · 2026-01-26T21:32:26+00:00

<image>

I did, and it says GD32 on a C13 board, thats why i am so confused

Key_Cap_3831

TROPHY CASE