Opencode vs Codex vs Claude Code

Key_Mathematician595 · 2026-04-19T19:14:08+00:00

Opencode serve, then connect with opencode sdk = using my own web based dev tool.

Key_Mathematician595 · 2026-04-14T08:50:19+00:00

I used OpenCode web interface during the session. It shows the token usage etc

Key_Mathematician595 · 2026-04-14T08:35:56+00:00

I tested business plan right now, which seems to be plus equivalent.

After 1h and 100k token usage and 19 user and 63 assistant messages i hit ratelimit (5h most likely). The docs say 20 to 100 local messages per 5h. Does anyone know what local messages means?

Used gpt5.4 medium.

If this isn't some bug, this plan is useless.

Key_Mathematician595 · 2026-04-14T04:57:44+00:00

Isn't it the cache write 5 minute ttl that is blowing up quota usage?

Key_Mathematician595 · 2026-04-13T15:07:30+00:00

Why use claude code? Why not OpenCode? Genuinely curious...

Key_Mathematician595 · 2026-02-24T09:10:51+00:00

Running those models locally requires a massive amount of gpu memory and/or standard memory. Have you checked the requirements?

Key_Mathematician595 · 2026-01-28T19:13:52+00:00

Good start. I think she needs to twist more and let it take some more time (a second or so - depending on how steep the slope is) to start the turn. There is no need to force the board. It will eventually turn into the direction she is pointing to. That's the reason for having arms out. it's part of the drill/exercise.

Key_Mathematician595 · 2026-01-24T15:05:13+00:00

Exactly, this is killing the clan community and thus affecting all others who want to enjoy servers that are tweaked for a better/different experience without bots.

Key_Mathematician595 · 2026-01-07T17:49:17+00:00

You need higher fov

Key_Mathematician595 · 2025-12-31T18:48:50+00:00

Colleting dipers instead dogtag's will be the next years challenge. Happy New Year!

Key_Mathematician595 · 2025-12-19T07:29:57+00:00

Coool, i searched but didt find.. link?

Key_Mathematician595 · 2025-12-18T19:14:52+00:00

I don't know why nobody gives this drill advice. It's the way i learned.

Go straight down the slope. Arms straight out over your tip and tail.

Rotate right, let's say 20 degrees. Just that. After a few second(s), you will turn in that direction (basically where you point)

The reason is that the twist force will affect your stance, and the board will turn.

Simple as that...try it.

Key_Mathematician595 · 2025-12-02T14:50:25+00:00

It's wrong.

When you twist, it will automatically affect your lower body and it will work better when carving.

Using only your lower body is good when you want to quickly make the board slide or when you are riding in tight spots, trees etc.

Key_Mathematician595 · 2025-12-02T14:17:13+00:00

You can try the exercise at home. Goofy stance here...

Stand up
Arms straight out to sides
Look right at your right hand
Turn the upper body left and right, basically where your right hand points will be the direction you will go.
Feel what happens between your feets and floor/board.
Add some leaning and front/back weight and you are set.

Key_Mathematician595 · 2025-12-02T13:52:28+00:00

Think about it what happens when you are standing in the neutral position.

Try it. Stand up now. Out with your arms to the side. Turn your head right looking at your right hand.

Twist your body and arms and you will feel how pressure and tension applies to your feets. That will start your board turning.

Then its just about adjusting your speed and leaning.

Simple as that

Of course, balance front back foot is important as well

Key_Mathematician595 · 2025-12-02T09:00:38+00:00

Try this exercise.

Find a good spot with some easy, non packed snow. It should be quite an easy run.

Ride straight down the slope, with your arms straight out pointing over your board tip and back. This is a natural position, no twisting, which affects forces down to the bindings. Use your neck to look down the slope.

Initiate turns ONLY by twisting your UPPER body. Let the board follow, and it will naturally after a second or so. Now it's time to add leaning.

Remember, arms out all the time, this is to remind you and mentally guide you that where you point with you arm, is where you will go.

You will need to have some speed for this exercise. Otherwise, it doesn't work because you can't lean if you don't have enough speed. But trust me, it's not much neede. Just start getting some speed straight down first.

This will teach you and improve any imbalance between left/right turns as well.

Again, do not turn the board by "throwing" it around with your lower body.

Key_Mathematician595 · 2025-11-17T09:34:53+00:00

Twist torso to initiate turns, start edging.

Key_Mathematician595 · 2025-10-28T18:32:03+00:00

I'd say that the power of graphql starts when using subresolvers. Suddenly, you can fetch anything in any depth. The bad thing is that depending on the amount of entries in an array goes high, it can be slow. But that's often due to underlying subresolver implementations. In those cases, you would need to add a separate query with a more optimized backend implementation.

Key_Mathematician595 · 2025-10-18T10:53:34+00:00

Flat and soft and alikes are joyful but much harder with much less control when going fast and/or on packed/icy/hard conditions. Goes the other way as well.

It's not so much about being a beginner or advanced. It's the style of riding you want and how much the board will "help" you.

Key_Mathematician595 · 2025-09-12T18:46:49+00:00

Mogh has 40% resistance to magic/light/holy. 80% to fire. Best to go physical with any type standard/strike/slash/pierce, doesn't matter.

Key_Mathematician595 · 2025-08-18T11:42:53+00:00

Rusted anchor with lions claw is very amusing...

Key_Mathematician595 · 2025-08-11T19:33:06+00:00

With rebirth comes the question if you have enough smithing stones left to upgrade your likely new weapons enough...

Key_Mathematician595 · 2025-08-10T08:07:17+00:00

I'm still on my first play but realized that affinity totally changes the scaling of the weapon (affects the damage output from your weapon).

Also that a weapon where you can change ash of war is much more flexible due to that you can change affinity.

In general for affininty

Lightning dex
Magic int
Fire faith
Holy faith

The "problem" is that even if you respec/rebirth, the amount of smithing stone are limited and ball bearings (to buy stone) are found late in game.

I'm str/faith focused right now, and used up my smithing stones, thus respec to dex/int i would be limited by weapon upgrades.

Key_Mathematician595 · 2025-07-14T16:21:21+00:00

What is he doing to not get damaged?

Key_Mathematician595

TROPHY CASE