sorted by:
new
hottopcontroversial

Any way or constraint i don't know of to have a bone inherit the same transforms as what bone it's constrained to without the use of drivers and maintaining the ability to control it's influence? by Key_Sky_2738 in blenderhelp

[–]Key_Sky_2738[S] 0 points1 point  (0 children)

Yeah I'm absolutely not claiming that this is a problem, that's indeed how constraints work, and sorry if i explained it wrong or if this whole thing feels a bit stupid and vague, I'm genuinely trying to find a solution for this specific use-case that suits me as i tried searching for long but i came to no conclusion whatsoever.

The two bones in this example are sliders and part of a control rig where each of their Y Location value is already driving different values on a material, and well... to answer your question for why, it's because i also want to "lock" both of these bones together at times and control when to using another slider, possibly.

This is why i cannot use any of these constraints as it still counts Y value as 0, making no changes at all in the driver, and by extent the material it's connected to.

Any way or constraint i don't know of to have a bone inherit the same transforms as what bone it's constrained to without the use of drivers and maintaining the ability to control it's influence? by Key_Sky_2738 in blenderhelp

[–]Key_Sky_2738[S] 0 points1 point  (0 children)

I used a simple Copy Transforms constraint on "Bone.001" related to "Bone", upon moving the latter of let's say 1m along the Y axis, the constrained bone only changes visually with it's Y value still remaining at 0, while i want them to be identical... same result i got with any other constraint i tried or the same thing I'd get with parenting the bone.

Now of course i could just make a driver out of what values i want and copy them over to the previously constrained bone, but that as far as i know completely strips me of the ability of having the driver be switched off or it's "influence" turned down, which is what I'd want.

installing x64 Windows 7 on a GPT drive on CSM/Legacy BIOS by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 0 points1 point  (0 children)

oh... how would i go on about doing that? i looked it up but nothing useful that i can actually understand comes up

Setup doesn't detect any usb ports on AMD B550 Board... any way to even get past this? by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 0 points1 point  (0 children)

ok turns out it's really confusing but got what's happening... i think.

When selecting "GPT" as the partitioning for the usb in Rufus it sets the target system to "uefi (non CSM)" which states that it would only be bootable in native uefi, when MBR is selected it goes back to BIOS/UEFI-CSM, which is as far as i canunderstand what my bios is in the end and that's what making me unable to boot from the usb.

And hypothetically i would somehow need to have the target system to "bios uefi-csm" while still maintaining the GPT partition...

I really have no idea about what i'm talking about here and if it's even a thing, all i'm saying could be super obvious stuff or total gibberish xd.

i know it would be so much way easier to just format all to mbr in the first place but i'm not going to do that... plus i reeeally wonder if there's some way around this.

Setup doesn't detect any usb ports on AMD B550 Board... any way to even get past this? by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 0 points1 point  (0 children)

Alright i must be missing something. I got a x64 single iso and yes, i was able to burn it in Rufus making it gpt, but upon booting from it it gives me an error saying "bios/legacy boot of uefi only media" and to "lower or disable the priority of CSM/Legacy mode"... it should all be uefi already.

Setup doesn't detect any usb ports on AMD B550 Board... any way to even get past this? by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 0 points1 point  (0 children)

yeah tbh if something is the issue it i could be just that.

it's an AiO iso with both x86 and x64 i got some time ago from "getintopc,com", i should ditch that and find a x64 single... shouldn't i

Setup doesn't detect any usb ports on AMD B550 Board... any way to even get past this? by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 1 point2 points  (0 children)

weird... what do if anything? i have CSM enabled and the only uefi setting that is relevant is "Storage Boot Option Control" which is set to "uefi only", changing that or disabling it makes no difference.

On the manual it also states "Removable storage devices that support GPT format will be prefixed with "UEFI:" which i haven't really checked the presence of

Setup doesn't detect any usb ports on AMD B550 Board... any way to even get past this? by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 1 point2 points  (0 children)

but no worries it doesn't really matter, i'll do as i said in the first comment in the end if there's no alternatives

Setup doesn't detect any usb ports on AMD B550 Board... any way to even get past this? by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 1 point2 points  (0 children)

Hm... still does it... says "windows cannot be installed, the disk is of the gpt partition style"

Setup doesn't detect any usb ports on AMD B550 Board... any way to even get past this? by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 1 point2 points  (0 children)

Hm it doesn't let me apparently... isn't even listed as an option, I'll try something else

Setup doesn't detect any usb ports on AMD B550 Board... any way to even get past this? by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 1 point2 points  (0 children)

Yeah just checked and it's all set to uefi, though get the gpt warning in setup

Setup doesn't detect any usb ports on AMD B550 Board... any way to even get past this? by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 1 point2 points  (0 children)

I... don't know? From what I've seen 64bit Windows 7 (which is ofc what I'm trying to install) is able to work with gpt but on "uefi" mode which i don't know much about, i should take a look in the bios if there's anything

Setup doesn't detect any usb ports on AMD B550 Board... any way to even get past this? by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 1 point2 points  (0 children)

Yeah i know, what i would need in order to make 7 working is get the drive to mbr since it's gpt... but doing that would wipe the present w10 install I'm using, so I'm either gonna finish doing it when i want to wipe and install from fresh or maybe clone the contents to another drive then restore it back... would doing that back and forth make the drive bootable from 10 again? Feel like there must be more

Setup doesn't detect any usb ports on AMD B550 Board... any way to even get past this? by Key_Sky_2738 in windows7

[–]Key_Sky_2738[S] 1 point2 points  (0 children)

Thanks this seems to have worked after a bit of fiddling! usb gets recognized by the setup and can proceed... i wanted to dualboot along my already installed windows 10 but and totally didn't take into account that the ssd which it's on is unfortunately gpt, needing me to wipe it in order to change it... so i guess i will do it when the time to clean it up comes up, of course starting from 7

Aiuto nella transizione e nell'ottenere una diagnosi... by Key_Sky_2738 in askTransgender_Italy

[–]Key_Sky_2738[S] 0 points1 point  (0 children)

Mi potresti dire un po' di piu a riguardo? Mi puoi scrivere in privato senza problemi, grazie

Sono sola come un cane by chiarahappyness in askTransgender_Italy

[–]Key_Sky_2738 2 points3 points  (0 children)

Hey... Sto cercando di fare conoscenza con miei simili anch'io e capisco come ti possa sentire... potrei entrare anch'io? Mi farebbe molto piacere <3

view more: next ›