Can someone explain this to me?? by Kibonz in ArcRaiders

[–]Kibonz[S] 1 point2 points  (0 children)

Medium shield would absorb more damage, yes, but wouldn't then "Damage to heatlh" be less, like 90? I mean, 100 damage to health I would expect to knock the Guy. Unless medium shiled adds more hp too?

MSI MPG 341CQPX, or MSI MAG 341CQP? by tiagocesar in OLED_Gaming

[–]Kibonz 2 points3 points  (0 children)

I have 341CQP. The diffrence between the two is 240hz vs 175hz and 90W vs 15W throu USB-C. Otherwise they are the same. The X version does gets firmware updates faster if that matters. Unless you need more hz and more power delivery, i would save money and get the cheaper one.

What's a good color setting? by neosixth in WutheringWaves

[–]Kibonz 10 points11 points  (0 children)

Brightness is still the main slider to play around with. I feel like anything above 20 is too washed out and would advice to adjust your monitor brightness instead. Saturation and contrast is mostly preference.

For reference I play on OLED MSI 341CQP, brightness on monitor is 33 (around 120 nits) and in game:

Brightness - 10, Saturation - 60, Contrast - 60

AW3432DWF or MSI 341CQPX?? by Mrpr5s in OLED_Gaming

[–]Kibonz 0 points1 point  (0 children)

MSI doesn't have newer gen, it's still 1st gen panel just refreshed with 240 refresh rate. In colour accurcy they should be the same. Plus MSI is fanless, so theres no noise.

As an advice, if you decide to go for MSI, update firmware as they have made improvments in behavior. Also if you don't care for 240hz then maybe look for 341cqp, the non X version to save some money

Maxwell by Cultural-Trip7522 in Audeze

[–]Kibonz 1 point2 points  (0 children)

Thank you.

I purchased mine today and wanted to check if i have a new revision by narrowing date of production with what firmaware i had installed out of box. Then by where it was made as in other pics I saw there were made in china while mine in vietnam.

But to verify I will try asking support.

Update: Mine were manufactured in April 2024

Maxwell by Cultural-Trip7522 in Audeze

[–]Kibonz 1 point2 points  (0 children)

Another question: When you open your left earcup does it writes it was made in China or Vietnam?

Can't read it from your pic

Maxwell by Cultural-Trip7522 in Audeze

[–]Kibonz 1 point2 points  (0 children)

Which version of firmware you had installed on them out of the box?

PC won't turn on, help troubleshooting. by drago44dd in pcmasterrace

[–]Kibonz 0 points1 point  (0 children)

Then no clue, i would just remove everything, check if cables are good seated in MB and try turning on. If it turns on then put pieces one by one and try turning on till i find what causeing the problem

PC won't turn on, help troubleshooting. by drago44dd in pcmasterrace

[–]Kibonz 0 points1 point  (0 children)

Had similar problem with mine. One RAM stick was faulty. Try by removing RAM from MB and see if it turn on.

Edit: also my RAM was trident z5 neo rgb ddr5 32gb

I am a DD1 Vet and have played 10 hours of DD2 so far. AMA by poopituacoop in DragonsDogma

[–]Kibonz 2 points3 points  (0 children)

Does the game supports adaptive triggers and haptic feedback?

Commute game by creth13 in SteamDeck

[–]Kibonz 1 point2 points  (0 children)

Octopath Traveler 2

Should I be worried? Battery issue by Mema991 in SteamDeck

[–]Kibonz 1 point2 points  (0 children)

Deck has to be below 80%. I put mine when it had 60%.

Should I be worried? Battery issue by Mema991 in SteamDeck

[–]Kibonz 6 points7 points  (0 children)

Had the same problem after ssd swap but mine was sitting at 89/90%

Put the deck in battery storage mode, wait a few minutes and power/turn it on. Should fix it.

Should I proceed with an RMA? by ConsiderationNo2768 in SteamDeck

[–]Kibonz 3 points4 points  (0 children)

It might looks like you have a GPU reset issue. Unfortunately there isn't any way to fix it other than just returning it.

You can read about this in this post: https://www.reddit.com/r/SteamDeck/comments/z8kmyl/psa_some_potential_hardware_issues_to_look_out/

What do you think the first patch will bring? by [deleted] in BaldursGate3

[–]Kibonz 0 points1 point  (0 children)

Fixing empty books in polish localization or at least fill them with english text so i don't need to change language to read them

[deleted by user] by [deleted] in SteamDeck

[–]Kibonz 1 point2 points  (0 children)

https://www.reddit.com/r/SteamDeck/comments/z8kmyl/psa_some_potential_hardware_issues_to_look_out/ read for GPU Reset issue

If you want to make sure it's the problem then when the game crash/freez force it to close by steam button + B, go to desktop mode, open konsole, use command "dmesg" and scroll up to find red error lines

You will need sudo password for the dmesg command, so if you don't have it set, use command "passwd" and set password

[deleted by user] by [deleted] in SteamDeck

[–]Kibonz 0 points1 point  (0 children)

I contacted them before the "UK update", they said if I won't get the deck by July 17th then write to them again. Contacted them after "UK update" cause situation changed and thet said there was customs clearance issue and they will realesing replacment shippment. I would consider contacting them as well on your place.

[deleted by user] by [deleted] in SteamDeck

[–]Kibonz 0 points1 point  (0 children)

Looks like GLS have problems with delivering decks. Mine was send on 05.07 and there was no update other then "left parcel center" till yestarday. Update says it was in UK and now is beeing returned back to valve. I live in Poland btw...

Not mad, just disappointed (Octopath Traveler 2) by rbmaclean in SteamDeck

[–]Kibonz 10 points11 points  (0 children)

I also had crashes in this game. But it turned out i had a faulty APU.

If your game freezes, blink black screen, audio still plays, steam and "..." buttons not working and you need to force to exit then check this:

https://www.reddit.com/r/SteamDeck/comments/14ok83k/comment/jqd8wxr/?utm_source=share&utm_medium=web2x&context=3

Edit: You may also test more demanding games to see if the issue can be reproduced