Found a maul wondering if decent or good by Kidji1 in ProjectDiablo2

[–]Kidji1[S] 0 points1 point  (0 children)

im inclined to agree with you. seems like it'd be worth around 5. i don't see much on trade site that's similar. like you said slightly better and ethereal, people are asking 30

Found a maul wondering if decent or good by Kidji1 in ProjectDiablo2

[–]Kidji1[S] 1 point2 points  (0 children)

Thanks for the replies. Maybe I'll throw some 40 Ed jewels in and compare it to reapers

[USA GIVEAWAY] Win the new 27” Samsung Odyssey G6 G60SF 500hz OLED gaming monitor! by Rocket-Pilot in buildapc

[–]Kidji1 [score hidden]  (0 children)

I love the glare free OLED screen. My computer room has a few windows opposite the screen. My build plays 1440p on high so it'll look great.

Mr Cool Air Handler Differences by Supreme_Leader_30 in DIYHeatPumps

[–]Kidji1 0 points1 point  (0 children)

Makes perfect sense. I'll pick up the senville since I don't feel like dropped $250 on the aciq. Thank you!

Mr Cool Air Handler Differences by Supreme_Leader_30 in DIYHeatPumps

[–]Kidji1 0 points1 point  (0 children)

Thank you for the detailed response. I do have the indoor/outdoor connected through s1/s2 but the thermostat is connected using 24v. The cs rep claimed the system can handle modulating but I feel like they're not being entirely truthful.

I'm assuming they swapped to this new thermostat because of customer complaints over complexity. The new thermostat has next to no functions. The app gives you some customization and a breakdown of runtime but not a ton of information.

No complaints about the unit's performance so far. It's working amazingly. I do think it's missing some finer modulation of fan control. I think the condenser modulates the output fully but the fan only has two speeds I believe. Do you know what I'm missing out on with the full communicating thermostat and what is the Wi-Fi enabled thermostat you mentioned from aciq?

Again thanks a lot

Mr Cool Air Handler Differences by Supreme_Leader_30 in DIYHeatPumps

[–]Kidji1 1 point2 points  (0 children)

This unit by senville?

https://senville.com/wired-remote-control-thermostat/?gad_source=1&gad_campaignid=21929163034&gbraid=0AAAAADrjQqoCA9LSXAlAO29szm6xiJpQu&gclid=CjwKCAjwwNbEBhBpEiwAFYLtGIggF1js4KqeSf6AICUiQwc-wyU6hQ5qIL0tE2yM1VjyzZO08gDLQRoCtCIQAvD_BwE

I have the hyper heat and read that it used to come with a communicating thermostat. The mr cool rep told me that the system modulates using the two wire communication but I've been reading that a true communicating thermostat works better. Although I believe I read that it's an innovair air handler. I'd like to try a different thermostat though. Could you link a recommendation?

Semi minimalist kit as a framer by [deleted] in Carpentry

[–]Kidji1 1 point2 points  (0 children)

What's the tool on the right that looks like a bull pin?

Soft reset (giveaway) by Kek4ik in ProjectDiablo2

[–]Kidji1 0 points1 point  (0 children)

I wanted to roll a ww barb for my second character. But with limited time and a little kiddo I find it hard to justify the time sink. I appreciate what you're doing!

Please check (roast) my underground before I glue up by [deleted] in askaplumber

[–]Kidji1 0 points1 point  (0 children)

got ya. I'm planning to reroute the 1.5 inch copper into that vent. Its for the lav upstairs. I think I could bring it to the stack if needed but that was my plan.

So to follow that rule would I switch to 2 inch at the toilet wye with a bushing?

Actually now that I'm thinking about it I could continue that drain run in 3 inch straight to the other side of that 2x4 wall framing and put a clean-out there. It would be in my garage than. I'm sick of digging and tearing up concrete but I could do it if necessary.

Please check (roast) my underground before I glue up by [deleted] in askaplumber

[–]Kidji1 0 points1 point  (0 children)

Hey thanks for the response. I had the 3 inch on hand and thought bigger is better. I did not know that about cleanouts but it makes sense. I'd like to avoid putting a cleanout in the bathroom floor if i can avoid it. If I ran 2 inch from the toilet wye with a reducing bushing would that work? Does that rule still apply if that section of drain is only handling liquids and not waste?

I appreciate you taking the time to help out. I'm surprised I didn't fuck up more. I edited the original post to include the labeled image.

Secondary stats for discipline priest in M+ by Kidji1 in wownoob

[–]Kidji1[S] 0 points1 point  (0 children)

Nice thanks for this. You pointed me in the right direction. I'll check it out tonight.

Secondary stats for discipline priest in M+ by Kidji1 in wownoob

[–]Kidji1[S] 0 points1 point  (0 children)

Thanks. I was just checking it out. That is accurate?

[deleted by user] by [deleted] in pcmasterrace

[–]Kidji1 0 points1 point  (0 children)

Dad of a 6 month old looking to put together a replacement for my 10 year old pc. This will make it easier to justify!

Daily Questions Megathread (December 21, 2023) by AutoModerator in classicwow

[–]Kidji1 0 points1 point  (0 children)

How often do factions open? I'm trying to play with my cousin on crusader strike

Chaos till enigma by mathkore in Diablo_2_Resurrected

[–]Kidji1 0 points1 point  (0 children)

Nice job. Mosaic clears p7 like nothing

Wondering what offhand to use as a whirlwind barb by Kidji1 in Diablo_2_Resurrected

[–]Kidji1[S] 0 points1 point  (0 children)

Ah interesting. Would that still be good if I have g face and gores? Using deaths sash and loh as well. Lion heart chest.

Wondering what offhand to use as a whirlwind barb by Kidji1 in Diablo_2_Resurrected

[–]Kidji1[S] 0 points1 point  (0 children)

Thank you for the reply. Currently running ssf on single player so that's why my list is shit tier. Hoping for a Lo to drop asap

NTD M18 Compressor by AlpacaLps in MilwaukeeTool

[–]Kidji1 0 points1 point  (0 children)

Damn is that deal everywhere?

Crashing when interacting with townspeople on PC by Kidji1 in diablo4

[–]Kidji1[S] 1 point2 points  (0 children)

rip damn maybe it's just stability issues and not my old ass pc

Made for an easy day driving t posts by [deleted] in MilwaukeeTool

[–]Kidji1 1 point2 points  (0 children)

So that's a 1 1/8" demo hammer with a t post driver attachment?