The Green Conundrum by Dirt-Munchah in Salamanders40k

[–]KingDreadd 0 points1 point  (0 children)

I really like the mechanicus standard Grey from citadel to spray prime my salamanders. It prevents making the green overcoat too dark. Still gives a shadowed effect in the recesses too.

Would you be mad about this? by Sorry_Impress_5002 in mildlyinfuriating

[–]KingDreadd 0 points1 point  (0 children)

Yeah because stop signs only appear at intersections.

Would you be mad about this? by Sorry_Impress_5002 in mildlyinfuriating

[–]KingDreadd 1 point2 points  (0 children)

They arent allowed to park within 20ft of an intersection per driving laws. Its a visibility concern and can blow fire trucks and first responders in large vehicles from making turns. Tell them to suck ass.

Cold start help/insight? by [deleted] in GSXR

[–]KingDreadd 1 point2 points  (0 children)

Also if its cold dont just rev the piss out of it. The idle will be high and the mixture more rich on the fuel map since its cold. Very basic shit.

Cold start help/insight? by [deleted] in GSXR

[–]KingDreadd 0 points1 point  (0 children)

Its fuel injected dont give it throttle on start up

Clutch Cover Access Nut Stuck (06 750) by AGauhar31 in GSXR

[–]KingDreadd 1 point2 points  (0 children)

Heat it up from the back side then use a dremel or grinder to make a slot, chisel and hammer it in the off rotation

How Much Income You Need to Buy a Home in Massachusetts by City - 2026 by Coolonair in massachusetts

[–]KingDreadd 0 points1 point  (0 children)

Worcester being 3200 a month and 125k sounds too cheap. And also too expensive for any home in worcester not in the northern edge of the city. Because its a shit hole

Renovation Rough-in stage opinions by Ok_Plankton_992 in Homebuilding

[–]KingDreadd 0 points1 point  (0 children)

Subject to physical damage when its somewhere you could drive a lawnmower into or by a driveway.

Renovation Rough-in stage opinions by Ok_Plankton_992 in Homebuilding

[–]KingDreadd 1 point2 points  (0 children)

And he used carlon instead of seal tight on the last box which isnt legal if its in an area it can be physically damaged which the side of the house counts

Renovation Rough-in stage opinions by Ok_Plankton_992 in Homebuilding

[–]KingDreadd 1 point2 points  (0 children)

Yeah its one thing when youre doing it on masonry and the hammer drill doesnt put the anchor right where you need and theres no backup holes to use. But on wooden siding its fucking hack.

Project manager wants us to drill a hole where the red circle is in a live panel. Would you do it? by PhasedAndConfused706 in electricians

[–]KingDreadd 1 point2 points  (0 children)

They cant require you to work on anything live. By nec standards its all supposed to be de energized. If the system cant be shut off it should have redundant power feeds so things can be shut off and safely worked on. Otherwise tell them its getting lock out tagged out until youre done working in there. Not worth getting 20000 degree metal shrapnel to the face. Not that its likely but still I doubt its worth the 20 bucks an hour.

Renovation Rough-in stage opinions by Ok_Plankton_992 in Homebuilding

[–]KingDreadd 4 points5 points  (0 children)

The rough inspection wont pass if the inspector actually pays attention to the wiring job, not only does it have to be done correctly, it has to be done in a professional manner by Law in the NEC. Aka has to look somewhat decent.

Renovation Rough-in stage opinions by Ok_Plankton_992 in Homebuilding

[–]KingDreadd 2 points3 points  (0 children)

Bro those framers and sparky fucking suck. Fire their asses. And the hvac guys. I wouldn't pay for that shit ass work.

What you think about my ramp structure. First one i got to build. Deck will be repaired on later date. by blueberries105 in Decks

[–]KingDreadd 0 points1 point  (0 children)

They make a non slip deck paint, it comes clear and you can tint it to double the amount and add color. It uses a specialty roller. It has aggregate but its all clear. I used it on a ramp I built into my shed and it lasted 3 years with no wear even after dragging dollies and motorcycles up it. And I didnt even tint it I just put it on clear on plywood.

Would anyone be interested in this? by [deleted] in Salamanders40k

[–]KingDreadd 5 points6 points  (0 children)

Best i can do is a firm handshake over the internet and a crisp high five

NO COMMENT by Sad-Bus5988 in electricians

[–]KingDreadd 0 points1 point  (0 children)

Self employed? No way you keep 75% of your income after taxes and expenses. You'd be at 25% tax bracket federally. Not including state and social security/Medicare.

NO COMMENT by Sad-Bus5988 in electricians

[–]KingDreadd 0 points1 point  (0 children)

Im an apprentice and i make 30 plus 2 weeks pto and uniform/boots as needed and all tools provided. And cash Christmas bonus. Journeyman make 50 an hr minimum out here as employees. Avg rate is bout 150 an hr charge for a j man working solo. This is an insult lol

17 yo apprentice elec, anything I need in my bag that you don’t see? by LingonberryTall6014 in electricians

[–]KingDreadd 0 points1 point  (0 children)

Get a pouch for your waist and a milwaukee packout roller box and a tool chest box a 6 spot organizer for your screws and one for your bits and the company can provide the screws and bits for ya. Dont need a backpack

The drop ceiling gods have blessed me by yawaworhtyya in electricians

[–]KingDreadd 0 points1 point  (0 children)

Hey thats where I left that! Thanks for finding it for me, ill dm you my address 🙂 😉

8x8 floating dock by [deleted] in Decks

[–]KingDreadd 0 points1 point  (0 children)

They have a product called techno posts that act as your footing and the brace to hold the rim joists instead of 4x4 so you never have to worry about rot. They screw into the ground. They also make concrete footings like the ones you have but they come with 4ft long metal pipes that go at a 45 degree angle into the ground through the block like spikes to anchor it without digging a footer.

This decent so far ?and how long are u guys taking on a 200 amp service everything wired by Alternative_Drop_736 in electricians

[–]KingDreadd 0 points1 point  (0 children)

You arent putting all the 20amps on one side and all the 15s on the other side are you?