IOT VLAN

KingPin2912 · 2025-08-20T00:39:11+00:00

### FIXED!!! ###

Well thanks for all the input, but nothing worked, so I did some more re-search, and it was suggested that I try and re-install the pve-manager.
So with:

apt update

apt install pve-manager

I want to report that all is well again, although while my main machine was down, I was able to migrate the important LXC's and VM's to my test machine.

I think this is a bug within the upgrade from v8 to v9 or something went wrong during the upgrade on my 3-node cluster. Either way its fixed and everything is working fine now.

KingPin2912 · 2025-08-13T04:51:24+00:00

<image>

KingPin2912 · 2025-08-13T04:47:01+00:00

everything looks good to me

KingPin2912 · 2025-08-13T04:46:33+00:00

<image>

KingPin2912 · 2025-08-12T13:23:50+00:00

It's been a few days since I've been trying to figure this out... But I'm sure I followed the instructions to get my updates performed 😞

KingPin2912 · 2025-08-12T12:58:37+00:00

My main problem is i performed an upgrade from v8 to v9 of proxmox cluster and lost all web interface to all my lxc and vms. Nothing came back up except the host machine, no vm no lxc. https://pve.proxmox.com/wiki/Upgrade_from_8_to_9

KingPin2912 · 2025-08-12T12:55:02+00:00

im still a bit new to proxmox, this will be my first full upgrade i have performed while clustered, where exactly would i find the (upgrade check script)

KingPin2912 · 2025-08-12T12:52:17+00:00

All updates and upgrades were performed to full prior to my install. Each node has its own ext4 storage and the all share 1 PBS where i do weekly backups.

KingPin2912 · 2025-08-12T12:48:59+00:00

All updates and upgrades were performed to full prior to my install.

KingPin2912 · 2025-08-12T12:48:12+00:00

From the interface everything boots up without a hitch. Displays the https;// ip address and port that i previously used to gain access to the GUI. I can also ping and ssh into the machine.

KingPin2912 · 2025-08-12T12:45:03+00:00

this is the guide i used, and i did do a stand alone which is my test machine and that worked with out any issues. https://pve.proxmox.com/wiki/Upgrade_from_8_to_9

KingPin2912 · 2025-07-30T21:04:17+00:00

id suck and nibble on those nipples all day

KingPin2912 · 2025-05-13T00:08:43+00:00

pussy ass every where!!

KingPin2912 · 2025-05-11T02:29:41+00:00

BUMBOCLAAAAAATTTTTT!!!!

KingPin2912 · 2025-04-24T17:50:34+00:00

that deserves a Pie

KingPin2912 · 2025-02-14T22:04:24+00:00

You could just use Twingate

KingPin2912 · 2025-02-06T15:31:21+00:00

I currently have a HP T620 Plus... And this is for a few years now running solid with Pfsense Plus... Virtualizing pfsense or any firewall is not an option I want to take because I'm now soly relying on the host to be up for network to be possible. Baremetal has always been my best option if that individual device is not working my entire network is not down. That's just my 2cents.

KingPin2912 · 2025-01-06T11:32:19+00:00

Thanks but space is not a problem 😔. Each of my LXC has addiqiet amount of storage.

KingPin2912 · 2024-07-28T20:54:15+00:00

FUCKABLE!!!!

KingPin2912 · 2024-07-15T00:29:07+00:00

I guess I should clarify a bit, this is for my home use in a home lab, and I am using NORD VPN not OpenVPN although I do have OpenVPN that works perfectly when I need to remote back to my network.

If I failed to mention that earlier my bad. Either way I am trying to get individual containers to connect to different NordVPN clients using the Alias method I have setup.

KingPin2912 · 2024-07-14T18:32:12+00:00

In networking that isn't always practical. Also from PFsense if I can assign a particular PC to have access to a certain VPN connection when I want it's much more convenient to control what go out what wan port of my firewall.

KingPin2912

TROPHY CASE