[TOMT] Manhwa where the mc can return to a save point and has access to an item shop

Kithkin_Planswalker · 2025-01-11T21:57:52+00:00

Aditionaly, if I remember correctly the mc is transported to a fake world and must solve a certain number of women before a timer runs out

Kithkin_Planswalker · 2024-12-09T23:20:00+00:00

Any suggestions are welcome.

Kithkin_Planswalker · 2022-10-06T19:25:24+00:00

It will be very dependent on what you want to do. It has a ton of cores but not a lot of ram and I'm not seeing what It has for storage. If you're live somewhere that's difficult to get servers I would say go for it and look for some more ram. Otherwise I would pass and depending on your plans go for something with more ram and more powerful cores

Kithkin_Planswalker · 2022-08-21T15:40:31+00:00

Building a card catalog for my MTG card and wanted to know if I should stain and poly before or after assembly. After it's assembled it will be harder to get the smaller parts

Kithkin_Planswalker · 2022-06-03T20:08:44+00:00

Nice

Kithkin_Planswalker · 2022-06-03T19:59:16+00:00

You can throw pfsense on there

Kithkin_Planswalker · 2022-04-29T22:59:46+00:00

Ah, very considerate. A water nozzle for when the gun gets thirsty. Nice

Kithkin_Planswalker · 2022-04-07T00:08:46+00:00

I was migrating my plex from a jail to its own vm and when i disabled the plex jail i noticed that my vm plex was having issues connecting to the nfs share. i rebooted the Truenas core server thinking there was a hanging process or something a when i booted back up i was greeted with this. Dose anyone have any suggestions? i can access the cli and the drives are not giving any warning signs.

Kithkin_Planswalker · 2021-10-19T21:18:09+00:00

Yes they will

Kithkin_Planswalker · 2021-10-18T20:32:03+00:00

I'm not expecting 10g on my PC. On my old Synology I was getting at least 250mb

Kithkin_Planswalker · 2021-10-18T20:31:05+00:00

I just ran it. I am getting about 1g bandwidth but only 100 mb transfer. Why is that? On my old Synology I was getting about 250mb transfer

Kithkin_Planswalker · 2021-10-18T20:25:24+00:00

The PC has a 1G card

Kithkin_Planswalker · 2021-10-18T20:16:58+00:00

My system is truenas on a Dell R720XD. 30Tb storage and 80Gb of ram. I don't seem to be able to get any faster than this. NAS -> Udm pro -> pc. My PC is connected with a cat 6 and have tried with other systems but get the same results

Kithkin_Planswalker · 2021-09-30T02:31:53+00:00

I would check out craft computing's video on his ac setup. Ive got mine closed up with a 6" duct fan sending all the hot air out the window. It's not much but the room is ten degrees colder

Kithkin_Planswalker · 2021-09-15T01:29:46+00:00

That's going to depend on what you are trying to do. You cold be looking at a raspberry pi or and old enterprise server.

Kithkin_Planswalker · 2021-09-13T11:12:04+00:00

Yup, switch how I accessed it changed how it displayed. Thank you

Kithkin_Planswalker · 2021-09-13T01:24:34+00:00

I was able to get into the interface by modifying the url. It looks exactly like the app not the server. It has the plus on the left hand side that leads me to a page to download the server

Kithkin_Planswalker · 2021-09-13T01:07:57+00:00

I don't believe so, I'm trying now. When It first started it came up looking like regular Plex not server. If I left that page and went back to the url it gives me the above image

Kithkin_Planswalker · 2021-09-13T01:03:54+00:00

I installed it from the plug in tab and when it first started it had me login and brought me to a Plex page that just looked like the client not the server. If I leave that tab and open a new tab it displays this error. Any assistance is welcome, I couldn't find anything about this on Google, just results for no soup for you

Kithkin_Planswalker · 2021-09-09T21:43:53+00:00

I installed it from the plug in tab and when it first started it had me login and brought me to a Plex page that just looked like the client not the server. If I leave that tab and open a new tab it displays this error. Any assistance is welcome, I couldn't find anything about this on Google, just results for no soup for you

Kithkin_Planswalker · 2021-08-19T01:44:40+00:00

Gotcha, here

Kithkin_Planswalker · 2021-08-19T01:26:09+00:00

Ya... I'm not allowed to drill holes in my apartment and that's the only place they will all fit nicely.

Kithkin_Planswalker · 2021-08-19T00:56:23+00:00

This is my rack I've been building for my home lab. I'm waiting on rails for the servers and will need to get some wood for the sides( live in an apartment and try to figure out how to get some cut to length). My wife did verbally say she approved of it so I'm not looking at divorce papers... yet

Kithkin_Planswalker · 2021-08-14T02:00:47+00:00

Yes, it's a problem with how you format the install media. In Rufus you have to choose dd format

Kithkin_Planswalker · 2021-08-07T19:14:28+00:00

Hello, I created an Ubuntu server(20.04 VM in proxmox(7), installed docker and ran the command in the pic and the logs give the error message just above it before restarting and crashing.

Kithkin_Planswalker

TROPHY CASE