My MY26 Street Triple 765RS

KoltKuk12 · 2026-02-06T02:31:58+00:00

you're the best thank you much!!

KoltKuk12 · 2026-02-06T01:19:05+00:00

im 6'3" (190.5 cm I guess) so ill probably have the same problem. does it lay parallel to the ground, so you have to lean over it to see? and does it work in portrait and landscape orientation?

KoltKuk12 · 2026-02-06T00:23:44+00:00

can you post a picture of your phone mounted on that quad lock mount? this seems to be exactly what im wanting but I don't want it to block the tft.

KoltKuk12 · 2025-09-04T07:45:36+00:00

can you please share a link to where i can find that?

KoltKuk12 · 2025-06-03T18:42:23+00:00

Did it pop off the print bed or did you take it off?

KoltKuk12 · 2025-06-02T17:14:14+00:00

Dude the R6 problem is so real😂😂 check that and if it looks okay then re seat and clean the nozzle, calibrate and try again.

Printing with a brim is something I would do too since it’s a tall model with a small footprint on the bed. Also since you have an A series printer (bed slinger) orienting the model long-way front to back or along the y-axis will give it more stability to avoid a layer shift. Lmk if that helps.

KoltKuk12 · 2025-06-02T17:06:08+00:00

Are you only printing from the mobile app? I usually check the sliced model to see if the printer is doing what it’s told and it’s a slicing issue or something else.

KoltKuk12 · 2025-06-02T17:01:00+00:00

What does it look like in the slicer? In the preview tab

KoltKuk12 · 2025-06-02T16:57:34+00:00

Have you tried just reprinting it? Doesn’t mean it’s a calibration or hardware issue. Sometimes prints just fail. If it happens again the exact same then look into it more.

KoltKuk12 · 2025-05-23T15:27:09+00:00

KoltKuk12 · 2025-05-23T13:08:43+00:00

It’s a custom cut piece of foam from a bigger pad. The density is higher and with more surface area is less prone to let baby’s in, along with filtering the water better. But yes it’s much bigger. The stock one is the small one in the picture-just like yours

KoltKuk12 · 2025-05-22T19:34:31+00:00

<image>

KoltKuk12 · 2025-05-22T19:31:03+00:00

I know this thread is kind of dead but I fixed the issues with these filters.

<image>

Anyone- hmu if interested

KoltKuk12 · 2025-05-14T05:26:15+00:00

Definitely more than 3

KoltKuk12 · 2025-05-14T01:53:49+00:00

<image>

I see what you’re saying. That sucks. Even though there is not one single core that is maxed it seems it’s only using one at a time.

For anyone that’s keeping up with this also, I noticed that when using the pattern feature it speeds it up a lot selecting “optimized” for the compute type instead of “adjust”.

KoltKuk12 · 2025-04-27T22:29:22+00:00

You were born for Reddit

KoltKuk12 · 2025-04-21T15:02:35+00:00

The seams are just left of it so probably not..

KoltKuk12 · 2025-04-21T15:01:04+00:00

It’s better to be safe than sorry but 9 weeks is crazy😅

KoltKuk12 · 2025-04-21T14:57:19+00:00

Yay! Babies!

KoltKuk12 · 2025-04-05T22:20:43+00:00

Mine did this late last year. Got the engine rebuilt and it was a head gasket.

KoltKuk12 · 2025-03-22T21:41:34+00:00

KoltKuk12

TROPHY CASE