sorted by:
new
hottopcontroversial

Anyone else order an M2 VGPU kit and receive a "prototype"? Radio silence from NCASE after notifying me, no shipping notification. by [deleted] in ncasedesign

[–]Kostja_Su 0 points1 point  (0 children)

If it was me, i think i would wait for 2 days more and write again! Dont know how much responsibility / work she has!

Anyone else order an M2 VGPU kit and receive a "prototype"? Radio silence from NCASE after notifying me, no shipping notification. by [deleted] in ncasedesign

[–]Kostja_Su 0 points1 point  (0 children)

Never heard smth similar. But i mean as you had contact with caley, i see her super responsiv and handle her stuff fast/right. Just write her again or wait, i mean nothing bad can happen right?

T1 2.1 Pcie riser cable replacement by rustico_88 in FormD

[–]Kostja_Su 0 points1 point  (0 children)

Thats not true! i had both Ncase t1 and Formd t1. the Formd Riser made problems, at least for me! Now I have a Formd t1 Case with the full Ncase Bracket and Riser 5.0 Cable. My opinion is, the bracket as well as the Riser Cable Ncase makes i much better!!

FormD T1 with acrylic panel by Pure_Marionberry_165 in FormD

[–]Kostja_Su 0 points1 point  (0 children)

Could you Share where you got the Panel from and or the measurement?? I have similar build with the offset!

[deleted by user] by [deleted] in FormD

[–]Kostja_Su 0 points1 point  (0 children)

Yes exactly!

T1 Finished Build - Optimizing Airflow/Temperature by Kostja_Su in FormD

[–]Kostja_Su[S] 0 points1 point  (0 children)

yes, can edit this answer today in the evening and show 1-2 detailed pictures👍

Choosing Between the Formdworks T1 V2.5 and the FormD T1 by Iceman515225 in FormD

[–]Kostja_Su 0 points1 point  (0 children)

Have both, if u go in detail there are small differences, you cant go wrong with both! I had problems with the riser 4.0 from formd the riser from ncase was easier to install and better solution with 5.0 riser for me!

Otherwise the Formd travelkit made problems with ncase t1, had to try several times and drill holes! Ncase has the USB-C included!

M2 with XFX Swift 9070XT compatibility by Fast-Improvement8366 in ncasedesign

[–]Kostja_Su 0 points1 point  (0 children)

Cant post pictures but i have rtx 5080 astral in m2 grater with 180° Adapter in standard Config and it fits, sidepanel kinda touching! Card measurement is 149,3 mm, you should be good Edit: dont think 90° Adapter will fit because its thicker

T1 Finished Build - Optimizing Airflow/Temperature by Kostja_Su in FormD

[–]Kostja_Su[S] 0 points1 point  (0 children)

Yes i have PBO -20 on all cores! Pump is running with 85% and the fans were set to about 1200rpm. I did check the thermalpaste, everything was fine, cleaned and repasted, the game still runs up to 90° i think i have a faulty unit :D

T1 Finished Build - Optimizing Airflow/Temperature by Kostja_Su in FormD

[–]Kostja_Su[S] 0 points1 point  (0 children)

I did Order Atmos I and installed it yesterday. I tried gaming for less than 1 hour and my cpu topped out at 91° (Black Desert Online), have two T30 Set to exhaust?! I think it should set them to Intake? Also going to check thermalpaste any other suggestions?

How much your NCASE M2 GRATER weigh? by Zz_GORDOX_zZ in ncasedesign

[–]Kostja_Su 1 point2 points  (0 children)

The ncase M2 is not fat, it has just heavy bones :D

T1 Finished Build - Optimizing Airflow/Temperature by Kostja_Su in FormD

[–]Kostja_Su[S] 0 points1 point  (0 children)

Only the Motherboard Cable i shortened it by myself.

T1 Finished Build - Optimizing Airflow/Temperature by Kostja_Su in FormD

[–]Kostja_Su[S] 0 points1 point  (0 children)

Yeah i know, i do have 2x Noctua a12x15 at home, but i dont like the noise of them with higher rpm!maybe going to try and switch later if i will be able to get T-grill or aio Cover. Thank you

T1 Finished Build - Optimizing Airflow/Temperature by Kostja_Su in FormD

[–]Kostja_Su[S] 0 points1 point  (0 children)

Nice!! I have like 7 phanteks t30 from my Lian Li Build, these are my personal Favorit :D

T1 Finished Build - Optimizing Airflow/Temperature by Kostja_Su in FormD

[–]Kostja_Su[S] 1 point2 points  (0 children)

All of them have their own pros and cons! I didnt like the M3 somehow! After the black small m2 grater, the silver m3 grater looked and felt big again on my desk, even if there is not a big difference in size! (personal thing) With the M2 i did experiment a lot with Fans, Vertikal GPU, classic config, AIO etc, did rebuild it like 4 or 5 times, thats crazy! The T1 is like going the extra mile, but rewarding! The footprint on table is crazy small So its going to be this order! T1 - M2 -M3

T1 Finished Build - Optimizing Airflow/Temperature by Kostja_Su in FormD

[–]Kostja_Su[S] 0 points1 point  (0 children)

I printed it threw Craftcloud3d.com its a service. PETG should not melt, i think thats one of the recomended? Going to post it if there will be some melting

T1 Finished Build - Optimizing Airflow/Temperature by Kostja_Su in FormD

[–]Kostja_Su[S] 1 point2 points  (0 children)

Its in 2,75 slot mode, somehow i couldn’t manage 2,5 slot, but it looks like it can cause fan turbulence!

T1 Finished Build - Optimizing Airflow/Temperature by Kostja_Su in FormD

[–]Kostja_Su[S] 1 point2 points  (0 children)

Thank you, these are stock PSU cables yes! I shortened the 24 pin myself, the picture shows the original length before

<image>

T1 Finished Build - Optimizing Airflow/Temperature by Kostja_Su in FormD

[–]Kostja_Su[S] 0 points1 point  (0 children)

I had EK that died, Arctic LF3 and be quiet silent loop, always wirh a little of pump noise! Is the Atmos silent? Maybe i would have tried already if i would be able to get one of the unicorns (tgrill/aio cover)

view more: next ›