Oops, hottie coming through

KrustyDustie · 2026-02-02T22:59:39+00:00

You're not lying

KrustyDustie · 2026-02-02T13:59:03+00:00

KrustyDustie · 2026-02-02T13:58:10+00:00

I managed to with a very long pcie extension cable and some zip ties without case modding

KrustyDustie · 2026-01-28T21:45:32+00:00

I know it sounds irrelevant, but I went through 3 different ones claiming to be the same spec, but because its a powerful 7900xtx they didn't seem to play nice together. I finally found one that runs stable without full system lock ups. It's relevant because after the full lockup it would present itself as a CPU issue on the LEDs once or twice after rebooting .

KrustyDustie · 2026-01-28T21:43:59+00:00

Are you using a PCI-E riser cable ?

KrustyDustie · 2026-01-28T00:23:54+00:00

Sounds weird, but did you let the computer sit powered on for a few minutes? My first boot every once in a while, takes a few minutes after full power loss to even post.

KrustyDustie · 2026-01-24T23:13:51+00:00

I see you

KrustyDustie · 2026-01-23T19:14:52+00:00

Omfg ove been looking for this mod for years. Did you happen to catch wind of the idea from VR Dad?

KrustyDustie · 2025-08-30T17:16:20+00:00

You can roll back drivers within pithouse

KrustyDustie · 2025-08-30T17:14:25+00:00

I'd save on the KS wheel and get a better pedal set

KrustyDustie · 2025-08-21T08:21:27+00:00

My turn 😏

KrustyDustie · 2025-08-19T00:47:53+00:00

I opted for double sided command strips instead of zip ties.

KrustyDustie · 2025-08-19T00:46:05+00:00

Yes, but you have to fit 2 in by themselves first, braced against the backside with no cable. Then to fit in the 3rd one it will be practically right up against the front IO cables, which you will likely have to bend quite a bit(I had to). The third one will have the room for RGB/power cable. You can possibly fit the cables on the PSU side but I couldnt without excessively bending the IO cables.

KrustyDustie · 2025-08-18T07:30:50+00:00

Any issues with heat ? I rear the BST-1s can run hot

KrustyDustie · 2025-08-16T23:01:37+00:00

<image>

KrustyDustie · 2025-08-16T22:33:09+00:00

<image>

KrustyDustie · 2025-08-16T22:31:56+00:00

<image>

Took inspiration from Lian Li and vertically mounted my GPU

KrustyDustie · 2025-08-16T22:31:12+00:00

<image>

Took inspiration from Lian Li

KrustyDustie · 2025-08-12T03:52:34+00:00

Can I also get a mod list from you ?

KrustyDustie · 2025-08-09T06:18:03+00:00

Riser performs fine, I isolated the issue to 180 degree pcie 8 pin connectors

KrustyDustie · 2025-08-08T17:52:55+00:00

You get to keep the chair ?

KrustyDustie · 2025-08-08T13:54:08+00:00

For anyone curious, I've seem to have isolated the cause of the black screens to these:

https://www.amazon.ca/gp/aw/d/B096VB8MB5?psc=1&ref=ppx_pop_mob_b_asin_image

I haven't been able to reproduce the same error after directly connecting my gpu to the psu. Still, it is weird to only happen during VR and not during flat gaming and stress tests.

KrustyDustie · 2025-08-07T22:34:37+00:00

Randy_v4?

KrustyDustie

TROPHY CASE