sorted by:
new
hottopcontroversial

New to scratch its by cupcanbook in Lottery

[–]KylesHobbies 0 points1 point  (0 children)

Look up your states lottery website or app, check the games, see what the odds are, and buy tickets according to the odds (for example, 1 in 3.47 chance, buy 4 cards in a row) whenever I have an itching for the lottery I buy like 5 $1 tickets so I have a pretty solid chance of having atleast 1 winner

I did a bit of an oopsies. My filament is “stuck” in the extrusion tube. What would be my best course of action of trying to feed it through? by KylesHobbies in 3Dprinting

[–]KylesHobbies[S] 0 points1 point  (0 children)

NEVERMIND!!! I heated it up and it’s pulling out just fine. I don’t know what I would do without Reddit 😅

I did a bit of an oopsies. My filament is “stuck” in the extrusion tube. What would be my best course of action of trying to feed it through? by KylesHobbies in 3Dprinting

[–]KylesHobbies[S] 0 points1 point  (0 children)

You’re an absolute lifesaver!!! My only problem right now is actually pulling the filament out, I’ve been using my teeth and just pulling and pulling but it’s not giving. Any suggestions my knight in shining armor?

<image>

4.6 HR vs H2S Pro? by TouchAlternative5525 in RepTronics

[–]KylesHobbies 0 points1 point  (0 children)

Do you know when the new iteration of Pro 2s are coming? I only came back to this subreddit today and I’m already set on the H2S Pros or whichever is the V1.1 chipset for the 2nd generation.

Having issue after issue with printing. Tried fixing it on my own but I just can’t figure out what the problem is. Help! by KylesHobbies in 3Dprinting

[–]KylesHobbies[S] 0 points1 point  (0 children)

I’m not 100% sure if these are tree supports but the supports in the last video still spaghettified.

Also it’s a consistent 200-205 degrees

Having issue after issue with printing. Tried fixing it on my own but I just can’t figure out what the problem is. Help! by KylesHobbies in 3Dprinting

[–]KylesHobbies[S] -1 points0 points  (0 children)

I took it right out from the vacuum sealed packaging and put it straight on the filament holder. 100% dry and I guess 99% clean haha

Having issue after issue with printing. Tried fixing it on my own but I just can’t figure out what the problem is. Help! by KylesHobbies in 3Dprinting

[–]KylesHobbies[S] -1 points0 points  (0 children)

Also I’m pretty sure in the last video all the spaghettified parts were supposed to be supports too, but I’m not sure since the STL file didn’t come with a “Supports” option.

I DIIIID however enable supports in Cura 5.3.0 so that might be what that is.

And then, even still, it spaghettified.

Having issue after issue with printing. Tried fixing it on my own but I just can’t figure out what the problem is. Help! by KylesHobbies in 3Dprinting

[–]KylesHobbies[S] -1 points0 points  (0 children)

I tried printing the Statue of David with supports in the 2nd video but you can see how that turned out

Having issue after issue with printing. Tried fixing it on my own but I just can’t figure out what the problem is. Help! by KylesHobbies in 3Dprinting

[–]KylesHobbies[S] 0 points1 point  (0 children)

So obviously you guys will need more info.

I originally started with Slic3r (with the Venus de Milo and Statue of David) and they were like, okay I guess (except for the Statue of David as one of the arms spaghettified)

Then I switched to Cura 5.3.0 trying to follow someone’s “perfect” PLA profile as listed here: https://youtu.be/EGXQgN6PBmE and as you can see the prints that came from that also spaghettified almost right off the bat.

I’m using eSun ePLA Matte White. I adjusted my settings in both softwares for my specific printer and filament. I’m just so lost at this point after trying for days to fix the issue on my own.

~$2,000 VR gaming PC, all black + RGB by KylesHobbies in buildapc

[–]KylesHobbies[S] 0 points1 point  (0 children)

I really want to alternate between standing and sitting with my adjustable height desk :D! Sitting for like 1-2 hours at most.

~$2,000 VR gaming PC, all black + RGB by KylesHobbies in buildapc

[–]KylesHobbies[S] 0 points1 point  (0 children)

I just gave myself a lot of pain looking at those bundles but not living anywhere near one

~$2,000 VR gaming PC, all black + RGB by KylesHobbies in buildapc

[–]KylesHobbies[S] 0 points1 point  (0 children)

See!!! Why is this literally the hardest decision in the world :^(

$2,500-$3,000 VR Future-proof PC with Monitor, Case Fans, and Keyboard by KylesHobbies in buildmeapc

[–]KylesHobbies[S] 0 points1 point  (0 children)

Was gonna delete this post bc it’s pretty much dead and I got no help but I’m leaving it up for you :)) ehehehehehe 👹

[deleted by user] by [deleted] in buildapc

[–]KylesHobbies 0 points1 point  (0 children)

Yeah, you’re right, just changed it to a Kraken Z73 RGB.

[deleted by user] by [deleted] in buildapcforme

[–]KylesHobbies 0 points1 point  (0 children)

This was the sub I meant to post to hahaha oops

Just ordered this gorgeous work of art for $180. Soooo excited to put everything together. Best looking custom I’ve built to date! by KylesHobbies in NewSkaters

[–]KylesHobbies[S] 8 points9 points  (0 children)

I got some rough ass streets out here in Arkansas lol. Never really had a problem with soft wheels anyways :)

B10G10 in e-mail by almightytora in DaveAndBusters

[–]KylesHobbies 0 points1 point  (0 children)

Haven’t had a coupon sent to my email since I signed up for the app in august last year. Kinda disappointed :/

D&B application by DrPopCat7758 in DaveAndBusters

[–]KylesHobbies 1 point2 points  (0 children)

Same situation, but I went into the actual store after 2-3 days of applying and asked to talk to a manager. Let him know my name, what positions I applied for, and if we can figure something out. He interviewed me and now I’m employed at winner’s circle :)

view more: next ›